1. Okwu mmalite
The CTEK INDICATOR EYELET M6 is an LED indicator designed to provide a clear and simple display of your 12V lead-acid battery's charge status. It features 6mm eyelets for permanent connection to hard-to-reach batteries, ensuring a quick and secure way to monitor and connect to a compatible CTEK charger (up to 10A).
Foto 1: CTEK INDICATOR EYELET M6, showing the product and its packaging. This device provides a visual indication of battery charge status.
2. Kedu ihe dị na Igbe ahụ
- 1 x CTEK INDICATOR EYELET M6 (Model: 56-629)
3. Ozi nchekwa
Always read and understand the safety instructions provided with your battery and charger before use. Failure to do so may result in serious injury or damage to the product or battery.
- Ensure correct polarity when connecting the eyelets to the battery terminals. The red eyelet connects to the positive (+) terminal, and the black eyelet connects to the negative (-) terminal.
- Anwala ịchaji batrị anaghị ebugharị.
- Keep the product away from open flames, sparks, and heat sources.
- Avoid short-circuiting the eyelets.
- This product is designed for 12V lead-acid batteries only.
- Always disconnect the charger from the power outlet before disconnecting the indicator from the battery.
4. Ntọala na nwụnye
The CTEK INDICATOR EYELET M6 is designed for permanent installation on your battery, providing convenient access for charge monitoring and connection to a CTEK charger.
- Kwadebe batrị: Ensure your vehicle's ignition is off and the battery terminals are clean and free from corrosion.
- Connect the Eyelets:
- Jikọọ red eyelet ka nti (+) ọdụ batrị.
- Jikọọ black eyelet ka adịghị mma (-) ọdụ batrị.
Foto 2: The red and black eyelets are designed for secure, permanent attachment to your battery terminals. Ensure correct polarity: red to positive, black to negative.
- Chekwaa njikọ ndị a: Tighten the nuts on the battery terminals to ensure a secure connection. Do not overtighten.
- Position the Indicator: Route the cable and position the LED indicator in an easily accessible location, away from moving parts or excessive heat. The indicator features a protective cap for the connector.
Foto 3: The connector end of the indicator, showing the protective cap that shields the connection points from dust and moisture when not in use.
- Integrated Fuse: The indicator cable includes an inline fuse for protection. Ensure the fuse holder is securely closed.
Foto 4: Detail of the inline fuse holder, which provides essential overcurrent protection for the battery and connected devices.
5. Operating the LED Indicator
The CTEK INDICATOR EYELET M6 uses a simple "traffic light" system to display the battery's charge status:
- Ìhè uhie: Indicates that the battery charge is low and requires immediate charging.
- Ìhè edo edo: Indicates that the battery charge is moderate and charging is recommended soon.
- Ọkụ ndụ ndụ: Indicates that the battery charge is good and no charging is currently needed.
To charge your battery, simply remove the protective cap from the indicator's connector and attach a compatible CTEK charger (up to 10A) to the connector. The charger will then proceed with its charging cycle.
6. Nlekọta
Regular maintenance ensures optimal performance and longevity of your CTEK INDICATOR EYELET M6 and your battery:
- Periodically check the eyelet connections to the battery terminals to ensure they remain tight and free from corrosion.
- Keep the protective cap on the connector when not in use to prevent dirt and moisture ingress.
- Inspect the cable for any signs of damage or wear. Replace if necessary.
7. Nchọpụta nsogbu
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Enweghị ọkụ ọkụ | Loose connection, blown fuse, or completely discharged battery. | Check eyelet connections. Inspect and replace the inline fuse if blown. Attempt to charge the battery with a compatible CTEK charger. |
| Incorrect LED color (e.g., Red when battery is known to be charged) | Faulty indicator or battery issue. | Nyochaa voltaji batrịtage with a multimeter. If the battery voltage is normal, the indicator may be faulty and require replacement. |
8. Nkọwapụta
- Akara: CTEK
- Ụdị: 56-629
- Voltage: 12 volts
- ndakọrịta: All 12V lead-acid batteries and CTEK chargers up to 10A
- Eyelet Size: 6 mm
- Ụdị ihe ngosi: LED (Red, Yellow, Green)
- Ibu ihe: 1.76 ounces (0.05 Kilogram)
- Akụkụ ngwaahịa: 0.03 x 4.72 x 5.83 sentimita asatọ
- Ụdị bọlbụ: Ikanam
9. Akwụkwọ ikike na nkwado
The CTEK INDICATOR EYELET M6 comes with a 2-afọ akwụkwọ ikike from the date of purchase. For warranty claims, technical support, or further assistance, please contact CTEK customer service or visit the official CTEK websaịtị.
Ị nwere ike ịchọta ozi ndị ọzọ na nkwado na CTEK Store on Amazon.
