Okwu mmalite
This manual provides detailed instructions for the proper use and maintenance of your My Weigh Triton T2 Digital Pocket Scale. Designed for precision and durability, this scale offers accurate measurements for various applications. Please read this manual thoroughly before operating the device.
Akpachara anya maka nchekwa yana ntuziaka ojiji
- Do Not Exceed Capacity: Never exceed the maximum capacity of 120 grams for the Triton T2 scale at any time. Overloading can damage the weighing mechanism.
- Elu nke kwụsiri ike: Always place the scale on a flat, stable surface. Ensure the scale is not exposed to vibrations, air currents, extreme temperatures, or dust, as these can affect accuracy.
- Nkwalite: When turning the scale on, allow it to self-test and acclimate. The display will typically show '0.0' when ready.
- Expansion Tray: The protective cover is removable when fully open and can be used as an expansion tray for weighing larger items.
- Ọgụgụ kwụsiri ike: The display may show slight fluctuations due to the extreme sensitivity of the scale. The correct reading is achieved when the readout becomes stable.
Melite
Ntinye batrị
The My Weigh Triton T2 scale requires 2 AAA batteries, which are included. To install or replace batteries, locate the battery compartment on the underside of the scale, open the cover, insert the batteries according to the polarity indicators, and close the compartment securely.
Ntinye mbu
Place the scale on a firm, level, and stable surface, away from drafts, vibrations, and extreme temperature changes. This ensures optimal performance and accuracy.
Ntuziaka ọrụ
Gbanyụọ/ Gbanyụọ
- Iji tụgharịa nha ahụ ON, pịa Gbanye/ Gbanyụọ button (red button). The display will show '88888' then '0.0' or '0.00'.
- Iji tụgharịa nha ahụ Gbanyụọ, pịa ma jide Gbanye/ Gbanyụọ bọtịnụ ruo mgbe ngosi gbanyụọ.
Usoro ịtụ atụ
- Turn the scale on and wait for it to stabilize at '0.0'.
- Gently place the item to be weighed onto the center of the weighing platform.
- Read the stable weight displayed on the LCD screen.
Ngbanwe nke otu
The Triton T2 scale can display weight in multiple units. To change the weighing unit:
- Mgbe ị gbanyechara nha ahụ, pịa bọtịnụ ahụ UNIT button repeatedly to cycle through available units: Grams (g), Ounces (oz), Troy Ounces (ozt), and Pennyweight (dwt).
- A ga-egosi ihe ahọpụtara na ngosipụta ahụ.
Tare Ọrụ
The Tare function allows you to subtract the weight of a container, so you only measure the contents.
- Debe ihe efu n'elu ikpo okwu nha.
- Pịa NA-EGO button (often labeled '-0-' or 'T'). The display will reset to '0.0'.
- Add the items to be weighed into the container. The display will show only the net weight of the items.
Using the Expansion Tray
The scale's protective cover can be detached and inverted to serve as an expansion tray, providing a larger surface for weighing items. Simply open the cover fully, detach it, and place it upside down on the weighing platform.
nhazi nhazi
Calibration ensures the accuracy of your scale. A 100g calibration weight (not included) is required for this procedure.
- Turn the scale Gbanyụọ and place it on a flat, stable surface.
- Pịa ma jide UNIT bọtịnụ, wee pịa ma hapụ ya Gbanye/ Gbanyụọ button. The display will show the required calibration weight (e.g., '120.0g').
- Pịa UNIT button again. The display will read 'CAL' and then '0.0'.
- Gently place the specified calibration weight (e.g., 100g or 120g, depending on the scale's prompt) onto the center of the weighing platform and wait for approximately 3 seconds.
- Pịa UNIT button. The display should show 'PASS' and then return to '0.0'. Calibration is now complete. Remove the weight.
Nlekọta
- Nhicha: Jiri nwayọ hichaa ọnụ ọgụgụ, damp akwa . Ejila ihe nchacha abrasive ma ọ bụ iminye nha n'ime mmiri.
- Nchekwa: Store the scale in a dry, cool place. Avoid storing it in areas with high humidity or extreme temperatures.
- Nlekọta batrị: Wepu batrị ma ọ bụrụ na agaghị eji ọ̀tụ̀tụ̀ ahụ mee ogologo oge iji gbochie ntapu.
Nchọpụta nsogbu
- Ọgụgụ na-adịghị akwụsi ike: If readings are unstable, ensure the scale is on a flat, stable surface, away from drafts, vibrations, and electronic devices that may cause interference. Recalibration may also be necessary.
- Njehie Ngosipụta: If the display shows 'EEEE' or 'O-Ld', the scale is overloaded. Remove the weight immediately. If 'Lo' appears, batteries are low and need replacement.
Nkọwapụta
- Akara: Arọ m
- Ụdị: Triton T2
- Ike: 120 grams
- izi ezi: 0.1 grams
- Nkeji na-atụ aro: Grams (g), Ounces (oz), Troy Ounces (ozt), Pennyweight (dwt)
- Ngosipụta: LCD azụ
- Ike: Batrị 2 x AAA (gụnyere)
- Ihe: Acrylonitrile Butadiene Styrene (ABS)
- Atụmatụ: Tare function, Auto Calibration, Overload Protection, Expansion Tray (cover)
- Ibu ihe: Ihe dị ka 6.4 ounces
Ngwaahịa gafereview

Akwụkwọ ikike na nkwado
The My Weigh Triton T2 Digital Pocket Scale comes with a Lifetime Replacement Warranty (CE certified). For warranty claims or technical support, please contact My Weigh customer service through their official website or authorized distributors. Keep your purchase receipt as proof of purchase.





