Okwu mmalite
This manual provides comprehensive instructions for the installation, operation, and maintenance of the Bogen Communications Ceiling Speaker Assembly, Model S810T725PG8UVR. This pre-assembled 8-inch ceiling-mounted speaker is designed for integration into 70V or 25V commercial audio systems, suitable for paging and background music applications. It includes a transformer, an 8-inch S810 cone, and a grille cover with a recessed volume control.
Ihe ngwugwu
- Bogen S810T725PG8UVR Ceiling Speaker Assembly (with 8" S810 cone and grille)
- Mgbanwe agbakwunyere
- Recessed Volume Control
- Mounting Hardware (screws for ceiling installation)
Ntọala na nwụnye
Before beginning installation, ensure that power to the audio system and associated circuits is turned off. Installation should be performed by qualified personnel in accordance with all local and national electrical codes.
Ịkwanye Ọkà Okwu
The Bogen S810T725PG8UVR is designed for easy installation into standard drop-ceilings. Identify the desired location for the speaker, ensuring adequate clearance above the ceiling tile for the speaker assembly.
Foto 1: N'ihu view of the Bogen S810T725PG8UVR Ceiling Speaker Assembly. This image shows the white grille with the perforated speaker cover and the central recessed volume control. The four screw holes for mounting are visible around the perimeter.
- Carefully cut a circular opening in the ceiling tile that matches the speaker's mounting diameter. Refer to the specifications section for precise dimensions.
- Feed the speaker wires from your amplifier through the opening.
- Position the speaker assembly into the opening.
- Secure the speaker to the ceiling tile using appropriate screws through the designated mounting holes on the speaker's frame. Ensure the speaker is flush and stable.
Njikọ waya
The speaker features a screw terminal bridge for quick and accurate connection to your audio system. This speaker is designed for 70V or 25V constant voltage commercial audio systems.
Ọgụgụ 2: N'azụ view of the Bogen S810T725PG8UVR Ceiling Speaker Assembly. This image displays the integrated transformer, the 8-inch speaker cone, and the screw terminal block with color-coded wires for different power tap settings (e.g., 70V, 25V, 4W, 2W, 1W, 1/2W, 1/4W, 1/8W).
- Chọpụta voltaji kwesịrị ekwesịtage tap (70V or 25V) and desired wattage setting on the speaker's transformer. The speaker offers various wattage taps (e.g., 4W, 2W, 1W, 1/2W, 1/4W, 1/8W) to adjust the speaker's output level.
- Jikọọ waya dị mma (+) na ekwentị gị amplifier to the selected wattage tap terminal on the speaker.
- Connect the negative (-) or common wire from your amplifier to the "COMMON" terminal on the speaker.
- Hụ na njikọ niile dị nchebe ma nweere onwe ha site na sekit dị mkpụmkpụ.
Mara: The specific wiring configuration (screw-terminal bridge or bare wire connections) may vary slightly by model. Always verify the connections based on the labels on your specific unit.
Ntuziaka ọrụ
Once installed and wired, the Bogen Ceiling Speaker Assembly is ready for operation. The recessed volume control allows for localized adjustment of the speaker's output level.
Njikwa olu
- The speaker features a recessed volume control located in the center of the grille. This design helps prevent inadvertent volume adjustments.
- To adjust the volume, use a small flat-head screwdriver or a similar tool to gently turn the control dial clockwise to increase volume and counter-clockwise to decrease volume.
- Adjust the volume to a comfortable listening level for background music or to an appropriate level for paging announcements.
The speaker has a frequency response of 70Hz to 15kHz, making it suitable for clear voice reproduction in paging systems and balanced audio for background music.
Nlekọta
The Bogen Ceiling Speaker Assembly requires minimal maintenance to ensure long-term performance.
- Nhicha: Periodically wipe the grille and visible surfaces with a soft, dry cloth to remove dust. For stubborn dirt, a slightly damp cloth can be used, but ensure no moisture enters the speaker assembly. Do not use harsh chemicals or abrasive cleaners.
- Nyocha: Annually inspect the speaker for any visible damage to the grille or frame. Check wiring connections for tightness and corrosion, especially if the speaker is in an environment with fluctuating temperatures or humidity.
- Ọnọdụ gburugburu: This speaker is designed for indoor use. Avoid exposing the speaker to excessive moisture, extreme temperatures, or direct sunlight, as these can degrade performance and lifespan.
Nchọpụta nsogbu
If you experience issues with your Bogen Ceiling Speaker Assembly, refer to the following common troubleshooting steps:
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Enweghị ụda sitere na Ọkà Okwu |
|
|
| Distorted or Low Quality Sound |
|
|
| Volume Control Not Responding |
|
|
If these steps do not resolve the issue, contact Bogen Communications customer support or a qualified audio technician.
Nkọwapụta
| Njirimara | Nkọwa |
|---|---|
| Aha Nlereanya | S810T725PG8UVR |
| Ụdị | Bogen |
| Ụdị Ọkà Okwu | Ceiling-mounted, 8" Cone |
| Ntinye Voltage | 25 Volts (also compatible with 70V systems) |
| Ike Nwepu kacha elu | 4 Watt |
| Nzaghachi ugboro ugboro | 70 Hz ruo 15 kHz |
| Ihe onwunwe | Metal, Plastic/Paper |
| Agba | Ọcha |
| Ụdị nkwụnye | Ugwu elu ụlọ |
| Ụdị njikwa | Recessed Volume Control |
| Ngwa gụnyere | Transformer, 8" S810 cone, Grille cover, Bare wires (depending on model) |
| Ibu Ibu | 9.9 ounces (0.28 Kilogram) |
| Akụkụ ngwaahịa | 13 x 13 x 3.2 sentimita asatọ |
| Ojiji ime ime/n'èzí | Ime ụlọ |
| UPC | 765368481877 |
Akwụkwọ ikike na nkwado
Specific warranty information for the Bogen Communications Ceiling Speaker Assembly (Model S810T725PG8UVR) is typically provided with the product packaging or can be found on the official Bogen Communications websaịtị. Biko rụtụ aka na akụrụngwa ndị a maka nkọwa gbasara mkpuchi mkpuchi, usoro na ọnọdụ.
For technical support, service, or inquiries regarding your Bogen product, please contact Bogen Communications directly. Contact information can usually be found on their official websaịtị ma ọ bụ n'ime akwụkwọ ngwaahịa ahụ.
Mara: Always provide your product model number (S810T725PG8UVR) and purchase date when seeking support.
