Okwu mmalite
The Atlas Sound M1000 is an 8-inch dual cone sound masking speaker assembly designed for installation in plenum spaces. This unit is engineered to accurately reproduce sound masking signals, contributing to acoustic privacy and comfort in various environments. It features an integrated 70.7V transformer with an external tap selector for precise system tuning and includes innovative installation hardware for simplified setup.
Ozi nchekwa
Always adhere to local electrical codes and safety regulations during installation. Ensure power is disconnected before making any electrical connections. This product is UL 1480 and UL 2043 listed for use in air handling spaces, indicating compliance with safety standards for such environments. Installation should be performed by qualified personnel.
Ihe ngwugwu
The M1000 unit comes pre-assembled and includes the following components:
- 8-inch diameter dual cone loudspeaker
- Integrated 70.7V transformer
- Mkpuchi
- gbagwojuru anya
- Mounting hardware (including EZ hang brackets and snap hanger assembly)
The pre-assembled unit includes the 8" dia. loudspeaker, transformer, enclosure, baffle, and mounting hardware. The EZ hang brackets and snap hanger assembly are integrated for ease of installation.
Ntọala na nwụnye
The M1000 speaker is designed for quick and easy installation in plenum spaces, utilizing its integrated EZ hang brackets.
Ịkwanye
- Kwadebe Ebe Nkwanye: Identify the desired location in the plenum space. The unit is suitable for use above suspended ceiling systems or in open ceiling spaces.
- Utilize EZ Hang Brackets: The factory-installed EZ hang brackets are collapsible and can be configured for upward, downward, or side-firing installation. Extend these brackets as needed.
- Chekwaa nkeji ahụ: Use the snap hanger assembly to securely mount the speaker. An optional MCHAIN72 suspension chain system (sold separately) can also be used for quick mounting and height adjustment.
Wiring and Tap Selection
The M1000 features an innovative input panel for electrical connections.
- Access Input Panel: The input panel includes knockouts and a strain relief connector. Remove the plate to access wiring terminals.
- Jikọọ Wiring: Connect the 70.7V audio signal wiring to the terminals. The system accommodates rigid or flexible conduit if required. An integral wire strain relief ensures secure cable termination.
- Select Power Tap: Use the external tap selector switch to choose the desired power setting (0.25W, 0.5W, 1.0W, 2.0W, 4.0W) for the 70.7V system. This allows for precise system tuning to achieve the required sound masking level. Ensure the "OFF" position is selected before making connections.
Foto 1: Atlas Sound M1000 speaker with visible tap selector switch and wiring input. The switch allows selection of power taps from 0.25W to 4.0W for 70.7V systems, or the 'OFF' position.
Ntuziaka ọrụ
The Atlas Sound M1000 is a passive sound masking speaker. Once properly installed and connected to a 70.7V sound masking system, its operation is integrated with the overall system control. The primary operational adjustment is the power tap selection.
- Power Tap Adjustment: The external tap selector switch allows you to set the speaker's output power (0.25W, 0.5W, 1.0W, 2.0W, 4.0W) for 70.7V systems. Adjust this setting to achieve the desired sound masking level in the coverage area.
- Ngwakọta sistemu: The speaker will reproduce the sound masking signal provided by the connected sound masking generator or amplifier. Refer to your sound masking system's manual for overall system operation.
Nlekọta
The Atlas Sound M1000 speaker requires minimal maintenance.
- Nhicha: Periodically inspect the speaker and enclosure for dust accumulation. Clean with a soft, dry cloth. Do not use liquid cleaners directly on the speaker components.
- Nyocha: Annually inspect wiring connections and mounting hardware to ensure they remain secure.
- Ọnọdụ gburugburu: Ensure the speaker is operated within its specified environmental conditions. It is designed for plenum spaces.
Nchọpụta nsogbu
If you experience issues with your M1000 sound masking speaker, consider the following:
- Enweghị mpụta ụda:
- Verify that the sound masking system ampagbanyere ọkụ ma na-arụ ọrụ nke ọma.
- Lelee njikọ waya niile site na iji waya amplifier to the speaker for continuity and secure termination.
- Ensure the tap selector switch on the M1000 is not set to "OFF" and is set to a desired wattage (e.g., 0.25W, 0.5W, 1.0W, 2.0W, 4.0W).
- Gosipụta ntinye voltage bu 70.7v.
- Low Sound Output:
- Adjust the tap selector switch to a higher wattage ntọala.
- Check the output level of the sound masking system ampna -emegharị ihe.
- Ụda agbagọ:
- Ensure the input signal from the sound masking system is not overdriving the speaker.
- Inspect the speaker cone for any physical damage.
If issues persist, contact Atlas Sound technical support.
Nkọwapụta
Foto 2: Dimensions of the Atlas Sound M1000 speaker, measuring 11.5" D x 11.5" W x 5.5" H.
| Njirimara | Nkọwa |
|---|---|
| Aha Nlereanya | M1000 |
| Ụdị Ọkà Okwu | Sound Masking, Specialty |
| Dayameta ụda okwu | 8 Inches (Dual Cone) |
| Olu Mkpuchi | 734 cubic sentimita asatọ |
| Transformer | 70.7V with external tap selector |
| Mgbata ike | 0.25W, 0.5W, 1.0W, 2.0W, 4.0W |
| Ike Nwepu kacha | 4 Watt |
| Ntinye Voltage | 70.7 volts |
| Akụkụ ngwaahịa (D x W x H) | 11.5" x 11.5" x 5.5" |
| Ibu Ibu | 9 pound |
| Ụdị nkwụnye | Plenum Mount (EZ hang brackets, snap hanger assembly) |
| Ndepụta nchekwa | UL 1480, UL 2043 (for air handling spaces) |
| Teknụzụ Njikọta | Wired (70.7V) |
| Onye nrụpụta | Atlas Sound |
| UPC | 612079179930 |
Ozi akwụkwọ ikike
The Atlas Sound M1000 speaker comes with a Limited Warranty. For specific terms and conditions, please refer to the official Atlas Sound warranty documentation provided with your purchase or visit the Atlas Sound website. This warranty typically covers defects in materials and workmanship under normal use.
Nkwado na kọntaktị
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Atlas Sound customer support:
- Onye nrụpụta: Atlas Sound
- Websaịtị: www.atlassound.com
- Refer to your product packaging or the Atlas Sound websaịtị maka ozi kọntaktị kacha ugbu a.
