1. Okwu mmalite
Daalụ maka ịzụrụasing the Smart-AVI DVS-400S DVI Video Splitter. This device is designed to distribute a single DVI video source to multiple DVI displays, maintaining high-quality video signals over extended distances. Please read this manual thoroughly before installation and operation to ensure proper use and to prevent damage to the unit.
2. Ozi nchekwa
Please observe the following safety precautions to prevent damage to the unit and to ensure your safety:
- Ewepụla akụkụ a na mmiri, iru mmiri, ma ọ bụ oke iru mmiri.
- Edokwala unit ahụ n'elu elu anaghị akwụsi ike.
- Jiri naanị ihe nkwụnye ọkụ ewepụtara na unit ahụ.
- Akwụsịla oghere ikuku.
- Tụtụ aka n'aka ndị ọrụ ruru eru.
- Disconnect power before cleaning. Clean with a dry cloth only.
3. Ihe ngwugwu
Chọpụta na ihe niile dị na ọ dị mma:
- 1 x Smart-AVI DVS-400S DVI Video Splitter Unit
- 1 x nkwụnye ọkụ
- Akwụkwọ ntuziaka onye ọrụ 1 x (akwụkwọ a)
Note: DVI cables and display devices are not included and must be purchased separately.
4. Ngwaahịa gafereview
The DVS-400S is a compact DVI video splitter designed for reliable performance. It features one DVI input and four DVI outputs, allowing a single DVI source to be displayed on up to four DVI monitors simultaneously.
Foto 4.1: N'elu view of the DVS-400S unit. This image shows the compact design and the Smart-AVI branding on the top surface of the device.
Foto 4.2: N'azụ view of the DVS-400S unit. This image highlights the DVI input port, four DVI output ports, and the power input jack, along with a power indicator LED.
Foto 4.3: Typical connection diagram for a Smart-AVI DVI distribution system. This diagram illustrates how the DVS-400S (represented by a similar device in the diagram) connects a single DVI source to multiple DVI displays, often utilizing CAT5/6 cables for extended reach with compatible receivers.
5. Nhazi
Follow these steps to set up your DVS-400S DVI Video Splitter:
- Gbanyụọ ngwaọrụ: Ensure all DVI source devices (e.g., computer, DVD player) and DVI display devices (e.g., monitors, projectors) are powered off before making any connections.
- Isi Iyi Njikọ: Connect a DVI cable from your DVI source device to the DVI B. port on the DVS-400S unit.
- Ngosipụta Njikọ: Connect DVI cables from the DVI pụọ ports (1-4) on the DVS-400S unit to your DVI display devices.
- Njikọ Ike: Plug the supplied power adapter into the DC 5V power jack on the DVS-400S unit, then plug the adapter into a standard AC power outlet.
- Ike Na: Power on the DVS-400S unit. The power indicator LED should illuminate. Then, power on your DVI display devices, followed by your DVI source device.
- Nyochaa ngosi: Confirm that the video signal from your source is now displayed on all connected monitors.
Note: For optimal performance, use high-quality DVI cables. The maximum supported resolution is 1920x1200 (WUXGA).
6. Ntuziaka ọrụ
The DVS-400S is a plug-and-play device and requires no additional software or drivers. Once connected as described in the Setup section, it will automatically split and distribute the DVI signal.
- Nkesa mgbaàmà: The unit will replicate the input DVI signal to all four output ports simultaneously.
- Nkwado mkpebi: Supports DVI resolutions up to 1920x1200 (WUXGA) and 1280x1024 (SXGA).
- Ogologo eriri USB: The effective cable length depends on the resolution and cable quality. Refer to DVI specifications for maximum recommended lengths.
7. Nlekọta
The DVS-400S requires minimal maintenance. Follow these guidelines to ensure longevity:
- Nhicha: Wepụ ike tupu ị sachaa ya. Jiri ákwà dị nro ma kpọọ nkụ hichaa mpụta nke ngwaọrụ ahụ. Ejila ihe nhicha mmiri ma ọ bụ ihe nhicha aerosol.
- Igwe ikuku: Hụ na e nwere ikuku zuru oke na nkeji ahụ. Ekpuchila oghere ikuku ọ bụla.
- Nchekwa: If storing the unit for an extended period, disconnect all cables and store it in a cool, dry place.
8. Nchọpụta nsogbu
If you encounter issues with your DVS-400S, refer to the following troubleshooting guide:
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| No video output on any display. |
|
|
| Poor video quality or flickering. |
|
|
| Only some displays show video. |
|
|
9. Nkọwapụta
| Nlereanya | DVS-400S |
| Ntinye ọdụ ụgbọ mmiri | 1 x DVI-I Single Link |
| Ọdụ ụgbọ mmiri mmepụta | 4 x DVI-I Single Link |
| Mkpebi akwadoro | Up to 1920x1200 (WUXGA), 1280x1024 (SXGA) |
| Ịnye ọkụ | DC 5V (site na ihe nkwụnye ike agbakwunyere) |
| Akụkụ (L x W x H) | 22.35 x 16.26 x 11.18 cm (ihe dị ka 8.8 x 6.4 x 4.4 sentimita) |
| Ibu | 680.39g (ihe dị ka 1.5 lbs) |
| Okpomọkụ na-arụ ọrụ | 0°C ruo 40°C (32°F ruo 104°F) |
| Okpomọkụ nchekwa | -20°C ruo 60°C (-4°F ruo 140°F) |
10. Akwụkwọ ikike na nkwado
Smart-AVI products are designed for reliability and performance. For warranty information and technical support, please refer to the official Smart-AVI websaịtị ma ọ bụ kpọtụrụ ndị ahịa ha ozugbo. Debe nnata nzụta gị dị ka ihe akaebe nke ịzụrụ maka nkwupụta ikike.
Maka ozi na akụrụngwa nkwado kachasị ọhụrụ, gaa na: www.smartavi.com
