1. Okwu mmalite
Thank you for choosing the Progress Lighting P8072-28 Recessed Trim. This incandescent open splay recessed trim features a white powdercoat finish and is designed for use with insulated ceilings. It has a 7-3/4 inch outside diameter and is intended for use with compatible Progress 6-inch recessed lighting housings (P87, P187, P83, P88, P82). Please read these instructions carefully before installation and use to ensure proper function and safety.
Foto 1.1: N'ihu view of the P8072-28 Recessed Trim with an incandescent bulb installed.
2. Ozi nchekwa
Ịdọ aka ná ntị: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation or servicing. All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unfamiliar with proper electrical wiring connections.
- Do not install this trim with non-compatible recessed housings. Compatibility is specified for Progress 6-inch recessed housings (P87, P187, P83, P88, P82).
- Refer to the housing's specifications for maximum wattage. This trim is rated for up to 250 watts at 120 volts.
- Gbaa mbọ hụ na njikọ niile echekwara na mkpuchi nke ọma.
- Emezigharịla ngwaahịa a n'ụzọ ọ bụla.
3. Akụrụngwa Ndepụta
Chọpụta na akụrụngwa niile dị tupu ịmalite nrụnye:
- P8072-28 Recessed Trim (1 unit)
- Product and Installation Sheet (this document)
Note: Recessed housing and incandescent bulb are sold separately.
4. Ntọala na nwụnye
This trim is designed for easy installation into compatible 6-inch recessed housings. The trim mounts to the can with a 2-inch by 7-inch leaf spring mechanism, which pulls the trim tightly to the ceiling.
- Gbanyụọ Ike: Before starting, ensure the power to the circuit is turned off at the circuit breaker or fuse box.
- Kwadebe Ụlọ: Ensure the recessed housing (e.g., P87, P187) is properly installed in the ceiling according to its own instruction manual.
- Tinye oghere: Ndị lamp socket from the recessed housing attaches directly to the trim. This eliminates the need for an adjustable socket mount within the housing. Secure the socket to the designated attachment point on the trim.
- Wụnye bọlbụ: Screw the appropriate incandescent bulb (up to 250W) into the socket.
- Insert Trim: Carefully push the trim assembly, with the bulb and socket attached, into the recessed housing opening. The leaf springs on the trim will compress and then expand to firmly hold the trim against the ceiling. Apply firm, even pressure until the trim is flush with the ceiling surface.
- Weghachi ike: Once the trim is securely in place, restore power at the circuit breaker or fuse box and test the light.
Ọgụgụ 4.1: N'elu-ala view of the P8072-28 Recessed Trim, illustrating the open splay design.
Figure 4.2: Dimensions of the P8072-28 Recessed Trim, showing a 7-3/4 inch outside diameter.
5. Ntuziaka ọrụ
The P8072-28 Recessed Trim operates in conjunction with your installed recessed housing and a compatible incandescent bulb. Operation is controlled via a standard wall switch connected to the lighting circuit.
- Gbaa mbọ hụ na wat ziri ezitage bulb (up to 250W) is installed.
- Jiri ihe mgba ọkụ mgbidi gbanye ma ọ bụ gbanyụọ ihe nkwụnye ọkụ ahụ.
6. Nlekọta
The P8072-28 Recessed Trim requires minimal maintenance.
- Nhicha: To clean the trim, ensure power is off. Wipe with a soft, dry or slightly damp akwa . Ejila ihe nchacha ma ọ bụ ihe mgbaze, n'ihi na ha nwere ike imebi njedebe.
- Ndokwa bọlbụ: Turn off power at the circuit breaker. Carefully pull the trim down from the ceiling to access the bulb. Unscrew the old bulb and screw in a new one of the correct type and wattage. Reinsert the trim firmly into the housing.
7. Nchọpụta nsogbu
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Ìhè anaghị agbanwuo. | Enweghị ikike na ngwa. Bọlbụ ahụ agbaala agba ma ọ bụ gbapụ agbaa. Wiring na -ezighi ezi. | Lelee ihe nbibi/fuse sekit. Kpochie ma ọ bụ dochie bọlbụ. Consult a qualified electrician to check wiring. |
| Mkpụmkpụ anaghị anọ n'okpuru elu ụlọ. | Improper installation of leaf springs. Housing not properly installed. | Ensure leaf springs are fully engaged. Verify housing installation according to its manual. |
| Ìhè flickers. | bọlbụ rụrụ arụ. Mgbanwe dimmer na-ekwekọghị ekwekọ. Nsogbu waya. | Gbanyụọ bọlbụ. Ensure dimmer is compatible with incandescent lights. Kpọtụrụ onye ọrụ ọkụ eletrik tozuru oke. |
8. Nkọwapụta
| Njirimara | Nkọwa |
|---|---|
| Nọmba nlereanya | P8072-28 |
| Ụdị | Ọganihu ọkụ |
| Ụdị | Recessed Trim (Open Splay) |
| Agba | Ọcha |
| Ihe onwunwe | Aluminom |
| Dayameta dị n'èzí | 7-3/4 sentimita (19.69 cm) |
| Akụkụ ngwaahịa (L x W x H) | 7.75" x 7.75" x 4.75" (19.69 cm x 19.69 cm x 12.07 cm) |
| Ibu Ibu | 5.9 ounce (167 grams) |
| Voltage | 120 volts |
| Max Wattage | 250 Watts (Incandescent) |
| Isi Iyi Ike | Igwe ọkụ eletrik |
| Ojiji ime ime/n'èzí | Ime ụlọ |
| Ụlọ dakọtara | Progress 6-inch recessed housings (P87, P187, P83, P88, P82) |
| UPC | 785247807222 |
9. Akwụkwọ ikike Ozi
This Progress Lighting P8072-28 Recessed Trim comes with a Akwụkwọ ikike dị afọ 1 from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, accident, misuse, abuse, or unauthorized modification. For warranty claims, please retain your proof of purchase and contact Progress Lighting customer support.
10. Nkwado na kọntaktị
For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact Progress Lighting customer support. Visit the official Progress Lighting websaịtị maka ozi kọntaktị kacha ugbu a.
Progress Lighting Official Websaịtị: Visit the Progress Lighting Store on Amazon
