Wharfedale MovieStar 60 6-Speaker System User Manual

Okwu mmalite

This manual provides essential information for the proper setup, operation, and maintenance of your Wharfedale MovieStar 60 6-Speaker System. Please read these instructions carefully before using your new speaker system to ensure optimal performance and longevity.

Image: The Wharfedale MovieStar 60 6-Speaker System, featuring a central subwoofer unit and five compact satellite speakers, all in a black finish. Two satellite speakers are positioned on top of the subwoofer, while the remaining three are arranged around it, illustrating the complete home theater audio setup.

Melite

Mwepu na nyocha

• Jiri nlezianya wepụ ihe niile dị na nkwakọ ngwaahịa.
• Inspect all speakers and cables for any signs of damage. Contact your retailer immediately if any damage is found.
• Retain packaging for future transport or storage.

Nkwupụta Okwu

• Subwoofers: Place the subwoofer in a corner or along a wall for optimal bass response. Experiment with placement to find the best sound for your room.
• Front Speakers (2): Position these speakers equidistant from your primary listening position, typically on either side of your television or display.
• Center Speaker (1): Place the center speaker directly above or below your television, ensuring it is centered with the screen for clear dialogue.
• Surround Speakers (2): Position these speakers to the sides or slightly behind your listening position, at or slightly above ear level.

Njikọ

• Ensure all audio components (AV receiver, television, etc.) are powered off before making connections.
• Connect the satellite speakers and center speaker to the appropriate speaker outputs on your AV receiver using speaker wire. Observe correct polarity (+ to + and - to -).
• Connect the subwoofer to the LFE (Low-Frequency Effects) or Subwoofer output on your AV receiver using an RCA cable.
• Plug the subwoofer's power cord into a suitable AC outlet.
• For wireless connectivity, ensure your source device's Bluetooth is enabled and pair it with the speaker system. Refer to your source device's manual for Bluetooth pairing instructions.

Ntuziaka ọrụ

Gbanyụọ/ Gbanyụọ

• Gbaa mbọ hụ na njikọ niile echekwara.
• Power on your AV receiver and then the subwoofer.
• The system will power off when the AV receiver is turned off, or can be manually powered off via the subwoofer's power switch or remote control.

Njikwa olu

• Adjust the overall system volume using your AV receiver's remote control.
• The subwoofer typically has its own volume control, allowing you to fine-tune the bass level independently.

Nhọrọ Isi mmalite

• Select your desired audio source (e.g., TV, Blu-ray player, Bluetooth device) using your AV receiver's input selector.

Nlekọta

Nhicha

• Dust the speaker cabinets regularly with a soft, dry cloth.
• Avoid using abrasive cleaners, solvents, or polishes, as these can damage the finish.
• Do not spray cleaning liquids directly onto the speakers.

Nlekọta izugbe

• Keep speakers away from direct sunlight, heat sources, and excessive moisture.
• Gbaa mbọ hụ na ikuku ikuku zuru oke na gburugburu subwoofer iji gbochie ikpo oke ọkụ.
• Avoid placing heavy objects on top of the speakers.

Nchọpụta nsogbu

If you experience issues with your speaker system, consult the following common problems and solutions before contacting support.

• Enweghị ụda:
  • Check all power connections for the subwoofer and AV receiver.
  • Nyochaa na njikọ waya ọ bụla echekwabara na etinyere ya nke ọma.
  • Ensure the correct input source is selected on your AV receiver.
  • Check the volume levels on both your AV receiver and the subwoofer.
• Ụda agbagọ:
  • Reduce the volume level on your AV receiver and/or subwoofer.
  • Check speaker wire connections for any frayed strands or short circuits.
  • Ensure the speakers are not overdriven.
• No Bass from Subwoofer:
  • Verify the subwoofer's power is on and its volume is adjusted.
  • Check the RCA cable connection from the AV receiver to the subwoofer.
  • Ensure the LFE/subwoofer output is enabled and configured correctly in your AV receiver's settings.
• Okwu njikọ Bluetooth:
  • Ensure the speaker system is in Bluetooth pairing mode.
  • Check that your source device's Bluetooth is enabled and within range.
  • Gbalịa iwepụ ma megharịa ngwaọrụ ahụ ọzọ.

Nkọwapụta

Akwụkwọ ikike na nkwado

For information regarding product warranty, please refer to the Warranty Policy provided at the time of purchase or contact Wharfedale customer support. Details on returns can be found in the Returns Policy.

For further assistance or technical support, please visit the official Wharfedale websaịtị ma ọ bụ kpọtụrụ ngalaba ọrụ ndị ahịa ha.