3M P95/OV Paint Project Reusable Respirator 6211 User Manual

1. Okwu mmalite

The 3M Paint Project Reusable Respirator 6211 is designed to provide respiratory protection against airborne particles and certain organic vapors. This all-in-one kit is recommended for spray painting and projects involving solvents or pesticides. Its swept-back cartridge design offers a wide field of view, and the combination of cartridges and filters ensures effective particulate filtration. This respirator is NIOSH-approved, ensuring it meets stringent government performance standards for workplace and regulated applications.

Atụmatụ gụnyere:

• NIOSH-APPROVED OV CARTRIDGE WITH P95 FILTER: Filters at least 95 percent of solids and liquid aerosols as well as certain organic vapors.
• SOFT, THERMOPLASTIC FACESEAL: Provides excellent comfort during extended use.
• CONVENIENT, REUSABLE DESIGN: Durable construction for lasting wear.
• 3M BAYONET CONNECTION: Compatible with a wide range of 3M cartridges and filters.

2. Kedu ihe dị na Igbe ahụ

Your 3M Paint Project Reusable Respirator 6211 kit includes:

• One 3M respirator face-piece
• One pair organic cartridges
• Two pair pre-filters
• One pair filter retainers

Figure 2.1: Included components of the 3M Respirator kit.

3. Ntuziaka maka ịtọlite ​​na itinye ya

Proper fitting is crucial for effective respiratory protection. Follow these steps to ensure a secure and comfortable fit:

1. Place respirator over mouth and nose: Position the face-piece low on the bridge of your nose for optimal visibility and best fit.
   

   Figure 3.1: Initial placement of the respirator.

2. Pull harness over the crown of your head: Ensure the top straps are positioned correctly.
   

   Figure 3.2: Positioning the head harness.
3. Adjust straps: Take bottom straps in both hands, place them in back of your neck, and hook them together. Adjust top straps first, then lower neck straps by pulling on ends. Do not pull too tight. Strap tension can be decreased by pushing out on back side of buckles.
   

   Figure 3.3: Detail of adjustable head straps for a personalized fit.

4. Operating and Seal Check

After fitting the respirator, perform a positive pressure seal check to ensure no air leakage:

1. Perform a positive pressure seal check: Place the palm of your hand over the exhalation valve cover and exhale gently. If the face-piece bulges slightly and no air leaks are detected between your face and the face-piece, a proper fit has been obtained.
   

   Figure 4.1: Performing a positive pressure seal check.

2. Adjust if leakage occurs: If air leakage is detected, reposition the respirator on your face and/or readjust the tension of the elastic straps. Repeat the seal check until no leakage is detected.
3. Repeat until tight seal: Repeat the above steps until a tight seal is obtained.

FOR WORKPLACE/OCCUPATIONAL USE ONLY.

5. Ndozi na Ndochi Nzacha

Regular maintenance ensures the longevity and effectiveness of your respirator. The 3M Paint Project Reusable Respirator is designed for convenient filter replacement.

Compatible Cartridges and Filters:

The 3M Bayonet Connection system allows for compatibility with various 3M cartridges and filters, enabling use in a wide range of applications.

Figure 5.1: Compatible 3M Organic Vapor Cartridges.

Figure 5.2: Compatible 3M Particulate Filters.

To replace filters, simply twist the old filters off and twist new ones into place. This system makes replacement quick and easy.

6. Nchọpụta nsogbu

• Mgbapụta ikuku: If you detect air leakage during the positive pressure seal check, reposition the respirator on your face and/or readjust the tension of the elastic straps. Repeat the seal check until no leakage is detected.
• Iku ume siri ike: If breathing becomes difficult, it may indicate that the filters are clogged and need replacement. Replace filters as described in the Maintenance section.
• Nchọpụta isi: If you begin to smell the contaminants while wearing the respirator, the cartridges may be saturated and need immediate replacement.
• Condensation Buildup: In cold weather applications, condensation may build up inside the mask. This is normal and typically does not affect performance, but occasional wiping may be necessary for comfort.

7. Nkọwapụta

8. Ozi nchekwa dị mkpa

• This respirator is NIOSH-approved as an N95 class respirator, designed for workplace, regulated uses and applications.
• NIOSH certification means the respirator has passed stringent government performance standards including filtration efficiency testing and provides at least 95% filtration efficiency for solid and liquid particles that do not contain oil.
• The P-series particulate filter is oil proof. Use according to manufacturer’s time use restrictions when oil aerosols are present.
• The 6001 OV Cartridge helps reduce exposure to certain organic vapors encountered during activities involving latex and oil-based painting, including paint spraying*, varnishes, stains, sealants, solvents, certain solvent-based cleaners or pesticides**. (*Use a prefilter when spraying. **Refer to Pesticide Product Label for Respirator Guidance).
• Always ensure a proper seal before entering contaminated environments.

9. Akwụkwọ ikike na nkwado

For product support, technical assistance, or warranty information, please contact 3M directly.

You can reach 3M at 1-800-243-4630 (or 1-800-267-4414 in Canada).