Altronix MAXIMAL77F Kachasị F Series Enwere ike ịnweta ike nrụnye ndị njikwa ike.

Ndị na-ahụ maka ịnweta ike MaximalF na-ekesa ma gbanwee ike iji nweta sistemụ njikwa na ngwa. Ha na-atụgharị ntinye 120VAC 60Hz ka ọ bụrụ iri na isii (16) na-achịkwa 12VDC ma ọ bụ 24VDC fuse echekwabara n'onwe ya. Enwere ike ịtụgharị nsonaazụ ike ndị a dị nfe-Safe/Fail-Secure ka ọ bụrụ kọntaktị “C” kpọrọ nkụ. A na-arụ ọrụ mmepụta ya site na sink onye na-anakọta oghe ma ọ bụ na-emeghekarị (NO) ntinye ọkụ ọkụ sitere na Sistemụ Njikwa Nweta, ahụigodo, bọtịnụ Push, REX PIR, wdg. nkeji ga-ebufe ike gaa n'ọtụtụ ngwaọrụ njikwa ngwaike gụnyere: Mag Locks , Eletriki Strikes, Magnetic Door Holders, wdg FACP Interface na-enyere aka Mberede Mberede, Oti mkpu, ma ọ bụ enwere ike iji kpalite ngwaọrụ inyeaka ndị ọzọ. A na-ahọrọ njirimara nkwụsị ọkụ ọkụ n'otu n'otu maka ihe ọ bụla ma ọ bụ niile nke iri na isii (16). Ngwa niile ejikọrọ ga-abụrịrị UL Edepụtara.

Chart nhazi usoro MaximalF

Nọmba Model Altronix	Ntinye 120VAC 60Hz (nke dị ugbu a)	Ngosipụta Fuse Board na-enye ike	Ngosipụta ọkụ na-enye bọọdụ ike batrị fuse	Ntinye DC nke aha Voltage Nhọrọ								Ọnụnọ kacha ugbu a maka Main na Aux. Nsonaazụ (Nnyefe Ike 1 / Ike 2), (A)	Ihe echekwabara fuse	Ntụnye Fuse Board ACM8	Ngosipụta Fuse Board ACM8
				Tụkwasịnụ Ike 1				Tụkwasịnụ Ike 2
				[DC]		[AUX]		[DC]		[AUX]
				Oke mmepụta 12VDC (V)	Oke mmepụta 24VDC (V)	Oke mmepụta 12VDC (V)	Oke mmepụta 24VDC (V)	Oke mmepụta 12VDC (V)	Oke mmepụta 24VDC (V)	Oke mmepụta 12VDC (V)	Oke mmepụta 24VDC (V)
Kachasị 11F	7A	5A / 250V	7.5A / 32V	eFlow4NB				eFlow4NB				-	16*	10A / 250V	3.5A / 250V
				10.1- 13.2	-	10.05- 13.2	-	10.1- 13.2	-	10.05- 13.2	-	3.3A + 3.3A
				10.1- 13.2	-	10.05- 13.2	-	-	20.28- 26.4	-	20.2- 26.4	3.3A + 3.6A
				-	20.28- 26.4	-	20.2- 26.4	-	20.28- 26.4	-	20.2- 26.4	3.6A + 3.6A
Kachasị 33F	7A	5A / 250V	10A / 32V	eFlow6NB				eFlow6NB				-	16	10A / 250V	3.5A / 250V
				10.0- 13.2	-	10.03- 13.2	-	10.0- 13.2	-	10.03- 13.2	-	5.3A + 5.3A
				10.0- 13.2	-	10.03- 13.2	-	-	20.19- 26.4	-	20.19- 26.4	5.3A + 5.6A
				-	20.19- 26.4	-	20.19- 26.4	-	20.19- 26.4	-	20.19- 26.4	5.6A + 5.6A
Kachasị 55F	7A	5A / 250V	15A / 32V	eFlow102NB				eFlow102NB				9.3A + 9.3A	16	10A / 250V	3.5A / 250V
				10.03- 13.2	-	10.03- 13.2	-	10.03- 13.2	-	10.03- 13.2	-
Kachasị 75F	8A	5A/250V (eFlow102NB) 6.3A/250V (eFlow104NB)	15A / 32V	eFlow102NB				eFlow104NB				9.3A + 9.6A	16	10A / 250V	3.5A / 250V
				10.03- 13.2	-	10.03- 13.2	-	-	20.17- 26.4	-	20.28- 26.4
Kachasị 77F	9A	6.3A/250V	15A / 32V	eFlow104NB				eFlow104NB				9.6A + 9.6A	16	10A / 250V	3.5A / 250V
				-	20.17- 26.4	-	20.28- 26.4	-	20.17- 26.4	-	20.28- 26.4

Kachasị 11F naanị: Nkewa nkeji a dị ka klaasị 2 nwere oke ike ọkọnọ ike na batrị nọrọ njikere, ọ dabara adaba maka ike: sensọ, na ngwaọrụ eletrọnịkị (dịka ọnụ ụzọ eletrik na-akụ).

Maximal33F, Maximal55F, Maximal75F na Maximal77F: Ihe mmepụta DC maka ihe ndị a na-enye ọkụ abụghị ike. Ọ bụrụ na achọrọ mmepụta nwere oke ike na ngwa ngwaahịa ikpeazụ, ihe nrụpụta DC sitere na ọkụ ga-ejikọta ya na ngalaba njikwa aha ahapụrụ iche ma ọ bụ bọọdụ ngwa na-enye nsonaazụ nwere oke ike. Ngwaahịa(s) na-enye mmepụta(s) nwere oke ike ga-edepụtarịrị dịka ihe kwesịrị ekwesị maka ngwa ngwaahịa njedebe ma gbanye ya dịka ntuziaka nrụnye ngwaahịa si dị. Usoro wiring klaasị 1, nkewa nke sekit, na ebe nchekwa ọkụ kwesịrị ekwesị ga-atụle mgbe ị na-ejikọta mmepụta DC nke ọkụ ọkụ na ngwaọrụ njedebe. Nsonaazụ inyeaka nke nkeji ndị a nwere oke ike.

Ndepụta ụlọ ọrụ

Ndepụta UL maka nrụnye US

UL 294* - UL Edepụtara maka nkeji sistemụ njikwa ohere.
*ANSI/UL 294 7th Ed. Nweta ọkwa arụmọrụ njikwa:
Mwakpo mbibi – I; Ntachi obi - I; Nchekwa ahịrị - I; Njikere site na ike – II, III, IV.
Ndepụta UL maka nrụnye Canada:
ULC-S319-05 – Ngwa klaasị nke sistemu nnweta eletrọnịkị.
CSA C22.2 No.205 - Ngwa mgbaama.
ULC-S319-05 Sistemụ njikwa nnweta eletrọnịkị ga-emebi site na iji mgbakwunye, mgbasawanye, ebe nchekwa ma ọ bụ modul ọzọ nke onye nrụpụta ma ọ bụ ndị nrụpụta ndị ọzọ rụpụtara.

Njirimara usoro MaximalF

ACM8 modul njikwa ike ịnweta ike:

Iri na isii (16) na-ebute nsonaazụ a na-achịkwa n'onwe ya. Nhọrọ mmepụta:
a) Iri na isii (16) mpụta ike nzacha nke dara ada.
b) Iri na isii (16) Nwepụta ike nzacha nke ọma.
c) Iri na isii (16) ụdị mpụta relay “C” (pụtara @ 5A/28VDC ma ọ bụ VAC).
d) Ngwakọta ọ bụla nke dị n'elu.

Iri na isii (16) Ntinye njikwa sistemụ na-akpalite ntinye. Nhọrọ ịkpalite ntinye:
a) Iri na isii (16) na-emeghekarị ihe ntinye mkpalite nkụ.
b) Ntinye iri na isii (16) mepere emepe.
c) Ngwakọta ọ bụla nke dị n'elu.
Iri na isii (16) aux agbachabeghị. mmepụta ike (a na-edepụta mmepụta @ 2.5A).

Igwe ọkụ na-acha uhie uhie na bọọdụ ACM8 na-egosi na a na-ebute nsonaazụ nke onye ọ bụla (na-agba ume).
Ịkwụsị Mkpọ oku ọkụ (latching ma ọ bụ enweghị nkwụsị) bụ nke a na-ahọrọ n'otu n'otu maka ihe ọ bụla ma ọ bụ niile nke asatọ (8). Nhọrọ ntinye ihe mgbanye mgbanyụ ọkụ:
a) Ndenye mkpalite akọrọ na-emepe nke ọma (MENWEE) ma ọ bụ mechiri emechi (NC).
b) Ntinye ngbanwe polarity sitere na sekit mgbama FACP.

Green LED na bọọdụ ACM8 na-egosi nkwụsị FACP kpalitere.
Mgbasa ozi FACP na-egosi na ntinye FACP na-akpalite (ụdị kọntaktị "C" nke akara @ 1A/28VDC UL anaghị enyocha ya).

EFlow Power Supply/Chaja na-enye ike nkịtị maka bọọdụ ACM8 (wiring ụlọ ọrụ) yana ngwaọrụ njikwa ohere niile ejikọrọ (wiring ubi).
ACM8 isi fuses bụ akara @ 10A. A na-atụle fiusi mmepụta @ 3.5A.
Nbunye/ịchaja eFlow:

Ntinye: 120VAC, 60Hz.
Maka mmepụta voltage na inye ugbu a na-ezo aka na MaximalF usoro nhazi Chart, pg. 3.
Klas inyeaka 2 Mmepụta nwere oke ike nwere ọkwa @ 1A (anaghị agbanwe agbanwe).
Mfefetage nchedo.
Chaja arụnyere n'ime maka acid a na-emechi ma ọ bụ batrị ụdị batrị.

Ọnụ ego kachasị ugbu a 1.54A.
Gbanwee akpaaka ka batrị nọrọ na-echere mgbe AC dara. Nyefee na ike batrị na-echere bụ ozugbo na enweghị nkwụsị.
Ikwupu mkpu ọkụ ọkụ na-elekọta (latching ma ọ bụ enweghị ike) 10K EOL resistor. Na-arụ ọrụ na ihe mkpalite na-emepe emepe (NO) ma ọ bụ mechiri emechi (NC).

AC dara nlekota (ụdị kọntaktị "C").
Batrị dara na nlekọta ọnụnọ (ụdị kọntaktị "C").
Nkwụsị ike dị ala. Na-emechi ọnụ ụzọ mmepụta DC ma ọ bụrụ na batrị voltage tụlee n'okpuru 71-73% maka 12V nkeji na 70-75% maka 24V nkeji (dabere na ike ọkọnọ). Na-egbochi mmịpụ batrị miri emi.
Maka ọkwa fiusi rụtụ aka na Chart nhazi usoro MaximalF, pg. 3.

Green AC Power LED na-egosi 120VAC dị ugbu a.
Ntinye AC na ihe ngosi LED nke DC.
Mkpirisi sekit na oke nchebe.
Mkpọchi na-anabata ihe ruru batrị anọ (4) 12VDC/12AH.
Akụkụ mkpuchi (H x W x D): 26" x 19" x 6.25" (660.4mm x 482.6mm x 158.8mm).

Ntuziaka nwụnye MaximalF

Ụzọ wiwi ga-adị n'ụzọ kwekọrọ na National Electric Code/NFPA 70/ANSI, Canadian Electric Code, Part I, Part II yana koodu mpaghara na ndị ọchịchị niile nwere ikike. Ezubere ngwaahịa maka naanị ime ụlọ.

Nchọpụta Ọkụkụ Na-eweta Ike Ọkụ LED (pg. 7)
Nchọpụta nchọpụta ọkụ nke onye njikwa ike nweta (pg. 7)
Nkọwapụta batrị kwadoro bọọdụ na-eweta ike (pg. 7)
Nchọpụta njedebe bọọdụ na-eweta ike (pg. 8)
Nweta njirimara njedebe onye njikwa ike (pg. 8)
Mpụta Board Na-enye Ike Voltage Ntọala (pg. 9)
Nweta eserese ngwa ngwa njikwa ike (pg. 9)
Eserese FACP/Nhọrọ inye nkwado ike (pg. 12)

Wunye unit n'ebe achọrọ. Kaa akara na prerill oghere na mgbidi ka kwụ n'ahịrị n'ahịrị igodo atọ dị n'elu n'ogige ahụ. Wụnye ihe nkwụnye elu atọ na kposara na mgbidi na isi ihe nkedo na-apụta. Tinye oghere igodo elu nke ogige ahụ n'elu skru atọ dị elu, dị larịị na nchekwa. Kaa akara ọnọdụ nke oghere atọ dị ala. Wepu ihe mkpuchi ahụ. Gwuo oghere ndị dị ala ma wụnye ngwa ngwa atọ. Tinye oghere igodo elu nke ogige ahụ n'elu skru atọ dị elu. Wụnye skru atọ dị ala ma jide n'aka na ị ga-eme ka skru niile sie ike (Mpaghara mkpuchi, pg. 15).
Jikọọ ike AC akwụghị ụgwọ (120VAC 60Hz) na njedebe akara [L, N] (Fig 3, pg. 10). Green "AC"
Ikanam na bọọdụ ọkụ ọkụ ga-agbanye. Enwere ike ịhụ ọkụ a site na oghere LED na ọnụ ụzọ nke ogige ahụ. Jiri 14 AWG ma ọ bụ karịa maka njikọ ike niile. Ekwentị green waya na-eduga n'ala ala.
Debe wiwi nwere oke ike na wiwi na-enweghị oke.
Opekempe 0.25" oghere ga-enyerịrị (Fig 3, pg. 10).
kpachara anya: Emetụla akụkụ ọla ndị ekpughere ekpughere aka. Mechie ike sekit alaka ụlọ ọrụ tupu ịwụnye ma ọ bụ na-arụ ọrụ. Enweghị akụkụ ndị ọrụ nwere ike ịrụ ọrụ n'ime. Tụtụ aka na nrụnye na ọrụ nye ndị ọrụ ruru eru.

Họrọ mmepụta DC chọrọ voltage site n'itinye SW1 n'ọnọdụ kwesịrị ekwesị na osisi ọkụ ọkụ (Maximal11F na Maximal33F) (Fig 1, pg. 9). Oke ọkụ 55F bụ ụlọ nrụpụta atọrọ na 12VDC.
Maximal77F ike ọkọnọ bụ ụlọ ọrụ atọrọ na 24VDC. Maximal75F nwere otu bọọdụ ọkụ na-enye ọkụ nke edobere na 1VDC, yana otu (12) bọọdụ ọkọnọ ike nke edobere na 1VDC.
Tule mmepụta voltage nke unit tupu ijikọ ngwaọrụ ọ bụla iji hụ na arụ ọrụ kwesịrị ekwesị.
Na-ezighi ezi ma ọ bụ elu voltage ga-emebi ngwaọrụ ndị a.

Nhọrọ mmepụta (Fig. 2, pg. 9):
Ngalaba ahụ ga-enye ma ọ bụ iri na isii (16) mpụta ike gbanwere, iri na isii (16) ụdị akọrọ "C" pụta, ma ọ bụ ihe ọ bụla ngwakọta nke ma gbanwee ike na ụdị "C" pụta.
(a) Mbupute ọkụ agbanweela nke ọma:
Maka arụmọrụ Fail-Safe jikọọ ndenye dị mma (+) nke ngwaọrụ njikwa ohere na njedebe akara [NC]. Jikọọ ntinye adịghị mma (-) nke ngwaọrụ njikwa ohere na njedebe akara [COM].
(b) Mbupute ọkụ agbanweela nke dara ada:
Maka ọrụ Fail-Secure jikọọ ndenye dị mma (+) nke ngwaọrụ njikwa ohere na ọnụ
akara [Mba]. Jikọọ ntinye adịghị mma (-) nke ngwaọrụ njikwa ohere na njedebe akara [COM].
(c) Mpempe akwụkwọ “C”:
Mgbe a na-achọ ụdị ụdị "C" a ga-ewepụrịrị fuses mmepụta kwekọrọ (1-8) nke bọọdụ ACM8 ọ bụla.
Ihe nrụpụta ike inyeaka ACM8 (anaghị agbanwe agbanwe):
Jikọọ ngwaọrụ njikwa ohere nke chọrọ ike mgbe niile na njedebe akara [C] nti (+) na [COM] adịghị mma (-). Enwere ike iji ihe mmepụta nye ike maka ndị na-agụ kaadị, igodo igodo wdg.
Nsonaazụ inyeaka eFlow (anaghị agbanwe):
Maka njikọ ngwaọrụ inyeaka agaghị emetụta mmepụta a site na nkwụsị ọkụ dị ala ma ọ bụ mkpu ọkụ
Interface. Jikọọ ngwaọrụ na njedebe akara [+ AUX -] (Fig. 3, pg. 10).

Nhọrọ ntinye ntinye (Fig. 2, pg. 9):
(a) Na-emepekarị mkpalite ntinye [NO]:
Ntinye 1-8 na-arụ ọrụ site na ntinye sink na-emeghe ma ọ bụ nke mepere emepe. Jikọọ ntinye njikwa njikwa ohere, ahụigodo, bọtịnụ ntinye, REX PIRs, wdg na njedebe akara [IN] na [GND].
(b) Mepee ihe ntinye ihe mkpokọ mkpokọta:
Jikọọ ogwe njikwa ohere mepere onye na-anakọta sink positive (+) na ọdụ akara akara [IN] yana nke ọjọọ (-) na njedebe akara [GND].
Nhọrọ Interface Oti mkpu ACM8 (Figs. 5-9, pg. 12):
Ntinye ntinye nke emechiri emechi [NC] ma ọ bụ nke na-emeghe [NO] site na ogwe njikwa ọkụ ma ọ bụ ndenye ngbanwe polarity sitere na sekit mgbama FACP ga-emetụta nsonaazụ ahọpụtara. Iji mee ka Kwụsị FACP maka mmepụta, gbanye mgba ọkụ kwekọrọ na bọọdụ ACM1 ọ bụla. Iji gbanyụọ nkwụsị FACP maka mmepụta, tụgharịa mgba ọkụ kwekọrọ na bọọdụ ACM8 ọ bụla.
(a) Ntinye [NO] na-emepe nke ọma:
Maka nko-elu na-adịghị ejigide na-ezo aka na Fig. 6, pg. 12. N'ihi na latching nko-elu na-ezo aka na Fig. 7, pg. 12.
(b) Ntinye [NC] na-emechikarị:
Maka nko-elu na-adịghị ejigide na-ezo aka na Fig. 8, pg. 12. N'ihi na latching nko-elu na-ezo aka na Fig. 9, pg. 12.
(c) FACP mgbama mgbanye mgbanye mgbanye sekit:
Jikọọ ihe dị mma (+) na nke na-adịghị mma (-) site na mmepụta sekit mgbama FACP na njedebe akara [+ INP -]. Jikọọ FACP EOL na njedebe akara [+ RET -] (a na-ezo aka na polarity na ọnọdụ mkpu). Jumper dị n'akụkụ TRG LED ga-ebipụ (Fig 6, pg. 12).
Ụdị akọrọ FACP "C" mmepụta (UL anaghị enyocha ya) (Fig. 2b, pg. 9):
FACP ụdị "C" nwere ike iji kpalite mkpesa ma ọ bụ ngwaọrụ mgbaàmà. Kọntaktsị ndị a na-agbanye n'elu ntinye oti mkpu ọkụ na bọọdụ ACM8.
Njikọ batrị guzoro n'akụkụ (Fig. 3, pg. 10):
Maka ngwa njikwa nnweta US batrị bụ nhọrọ. Achọrọ batrị maka nrụnye Canada (ULC-S319). Mgbe ejighị batrị, mfu nke AC ga-ebute mfu nke mmepụta voltage. Mgbe achọrọ iji batrị na-echere, ha ga-abụrịrị acid acid ma ọ bụ gel ụdị. Jikọọ batrị na ọnụ ahịa akara [- BAT +] (Fig 3, pg. 10). Jiri batrị abụọ (2) 12VDC ejikọrọ n'usoro maka ọrụ 24VDC (edu batrị gụnyere). Jiri batrị - Casil CL1270 (12V / 7AH), CL12120 (12V / 12AH), CL12400 (12V / 40AH), CL12650 (12V / 65AH) batrị ma ọ bụ UL ghọtara batrị BAZR2 na BAZR8 nke ọkwa kwesịrị ekwesị.
Ihe nrụpụta batrị na AC (Fig 3, pg. 10):
Ọ chọrọ ijikọ ngwaọrụ mkpesa nsogbu nlekọta na nsonaazụ akara [AC Fail, BAT Fail] akara nrụnye nlegharị anya [NC, C, NO] na ngwaọrụ ngosi ngosi kwesịrị ekwesị. Jiri 22 AWG gaa
18 AWG maka AC ọdịda & obere / enweghị mkpesa batrị.
Iji gbuo oge mkpesa AC maka awa 2, tọọ mgbanwe DIP [AC Delay] ka ọ bụrụ ọnọdụ gbanyụọ (Fig 3, pg. 10).
Iji gbuo oge mkpesa AC maka 1 min., tọọ mgbanwe DIP [AC Delay] na ọnọdụ ON (Fig 3, pg. 10).
Kwupu oti mkpu ọkụ (Fig. 3, pg. 10):
Iji mee ka Mwapu Mkpu Mkpu ọkụ tọọ ịgbanwee DIP [Mkpuchi] gaa na ọnọdụ ON.
Iji gbanyụọ mgbanyụọ mkpu ọkụ, tọọ mgba ọkụ DIP [Mkpuchi] ka ọ bụrụ gbanyụọ.
Ntinye nke Tamper Switch (Fig. 3a, pg. 10):
Ugwu UL Edepụtara tamper mgba ọkụ (Altronix nlereanya TS112 ma ọ bụ dakọtara) n'elu nke ogige. Malite
tamper mgbanaka nkwado n'elu nsọtụ nke ogige ahụ dịka 2" site n'akụkụ aka nri (Fig. 3a, pg. 10).
Jikọọ tampgbanwee wiring gaa na ntinye Ogwe njikwa nnweta ma ọ bụ ngwaọrụ mkpesa UL Edepụtara kwesịrị ekwesị. Iji mee ka mgbaama mkpu rụọ ọrụ, mepee ọnụ ụzọ nke ogige ahụ.
Ntinye ọkụ ọtụtụ (Fig. 2, pg. 9) (UL anaghị enyocha ya):
Mgbe ị na-eji mgbakwunye ike mpụga Edepụtara, ndị jumpers J1 na J2 dị na bọọdụ ACM8 kwekọrọ ga-ebipụ (Fig 2c, pg. 9 & Fig. 5, pg. 12). Jikọọ mpụga Edepụtara ikike njikwa ohere nwere oke ike na ọdụ akara akara [- Control +] (Nkwụsị ndị a na-adakọ na ọdụ [- Power +]). Mgbe ị na-eji akụrụngwa ọkụ DC, a ga-ahụrịrị polarity. Mgbe ị na-eji AC ike onunu, polarity mkpa ka a hụrụ (Fig. 2d, pg. 9.) All ubi njikọ wiring ga-eme n'ọrụ kwesịrị ekwesị nlele CM ma ọ bụ FPL jacketed waya (ma ọ bụ Ẹkot nnọchi) (Fig. 4a, pg. 11).

Nlekọta

A ga-anwale nkeji opekata mpe otu ugboro n'afọ maka ịrụ ọrụ kwesịrị ekwesị dịka ndị a:
Nlekọta FACP: Iji hụ na njikọ kwesịrị ekwesị na ịrụ ọrụ nke nkwụnye ọkụ ọkụ ọkụ.
Biko soro usoro kwesịrị ekwesị n'okpuru:
Ntinye na-emepe nke ọma: Ịtụnye obere n'etiti ọdụ ụgbọ elu akara [T] na [+ INP] ga-akpalite nkwụsịtụ Mkpu ọkụ. Wepu mkpụmkpụ ka ịtọgharịa.
Ntinye emechiri emechi: Iwepu waya site na akara akara [INP –] ga-akpalite nkwupu oti mkpu ọkụ. Dochie waya ka ọ bụrụ ebe akara akara [INP –] iji tọgharịa.
Ntinye sekit mgbama FACP: Ọ dị mkpa ịkpalite Sistemụ Mkpu Ọkụ. N'ọnọdụ ndị a niile, TRG LED nke ACM8 ga-enwu. Mbupute niile ahọpụtara maka
Mwepu oti mkpu ọkụ ga-eme ka mwepụta ngwaọrụ mkpọchi.
Mara: Mpụta niile [OUT 1] - [OUT 8] ga-abụrịrị n'ọnọdụ nkịtị (de-ike) tupu anwale. Mgbe a na-ahazi unit ahụ maka Mepee Nkịtị (Fig 8, pg. 12) ma ọ bụ na-emechikarị (Fig 10, pg. 12) arụ ọrụ latching, ọ dị mkpa iji tọgharịa mgbanaka mkpu ọkụ ọkụ site na ịgbalite mgbanaka nrụgharị nke emechiri emechi.
Mmepụta Voltage Ule: N'okpuru ọnọdụ ibu nkịtị, mmepụta DC voltage kwesịrị ịlele nke ọma voltage larịị (tụ aka na MaximalF usoro nhazi Chart, pg. 3).
Nnwale batrị: N'okpuru ọnọdụ ibu nkịtị, lelee na chajịrị batrị nke ọma, lelee voltage na ọdụ batrị yana na bọọdụ akara akara [+ BAT -] iji hụ na enweghị nkwụsịtụ na wires njikọ batrị.
Mara: Ọnụ ego kachasị ugbu a bụ 1.54A. Ndụ batrị tụrụ anya bụ afọ 5; Otú ọ dị, a na-atụ aro ka ịgbanwe batrị n'ime afọ 4 ma ọ bụ obere ma ọ bụrụ na ọ dị mkpa.

Nchọpụta Ọkụ Ọkụ Na-eweta Ike LED Diagnostics:

Uhie (DC)	Green (AC/AC1)	Ọkwa inye ike
ON	ON	Ọnọdụ ọrụ nkịtị.
ON	Gbanyụọ	Mfu nke AC. Batrị echere na-enye ike.
Gbanyụọ	ON	Enweghị mmepụta DC.
Gbanyụọ	Gbanyụọ	Mfu nke AC. Achụpụrụ ma ọ bụ enweghị batrị na-echere. Enweghị mmepụta DC.

Uhie (Bat)	Ọnọdụ batrị
ON	Ọnọdụ ọrụ nkịtị.
Gbanyụọ	Batrị ada ada/obere batrị.

Ịnweta ihe nleba anya nke ọkụ ọkụ LED

Ikanam	ON	Gbanyụọ
LED 1-Ikanam 8 (Uhie)	Mbupute relay (s) na-enye ike.	Mgbasa ozi (s) arụpụtaghị ike.
Trg (Green)	Ntinye FACP kpalitere (ọnọdụ mkpu).	FACP nkịtị (ọnọdụ enweghị mkpu).

Ịnweta ihe nleba anya nke ọkụ ọkụ LED

Batrị	Kachasị 11F	Kachasị 33F	Maximal55F, Maximal75F, na Maximal77F
7 AH	Nkeji 30/4A*	Nkeji 10/6A	Nkeji 5/10A
12 AH	Nkeji 35/4A*	Nkeji 30/6A*	Nkeji 30/10A*
40 AH	Ihe karịrị awa anọ/4A*	Ihe karịrị awa anọ/4A*	Ihe karịrị awa anọ/2A*
65 AH	Ihe karịrị awa anọ/4A*	Ihe karịrị awa anọ/4A*	Ihe karịrị awa anọ/4A*

Naanị nhazi ndị a ka enwere ike iji na nrụnye ULC-S319.

Ngosipụta njedebe Board Supply Board

Akụkọ Mgbe Ebighị Ebi	Ọrụ/Nkọwa
L, G, N	Jikọọ 120VAC 60Hz na njedebe ndị a: L na-ekpo ọkụ, N na-anọpụ iche. Ejila ọnụ akara [G].
+ DC -	Ụlọ ọrụ ejikọrọ na bọọdụ ACM8.
A na-ahụ maka mkpali EOL	Ọkụ mkpu Interface na-akpalite ntinye site na mkpụmkpụ ma ọ bụ FACP. Ntinye ntinye nwere ike imeghe nke ọma, na-emechikarị ya site na sekit mmepụta FACP (ntinye nwere oke ike klaasị 2) (Fig 3, pg. 10).
Mba, Ntọgharịa GND	FACP interface latching ma ọ bụ na-adịghị ekpuchi (Klas 2 nwere oke ike) (Fig 3, pg. 10).
+ AUX –	klaasị inyeaka 2 mmepụta nwere oke ike nwere ọkwa @ 1A (anaghị agbanwe ya) (Fig 3, pg. 10).
AC FAIL NC, C, NO	Na-egosi mfu nke ike AC, dịka ọmụmaatụ jikọọ na ngwaọrụ a na-anụ ma ọ bụ ogwe mkpu. Relay na-enwekarị ike mgbe ike AC dị. Ogo kọntaktị 1A @ 30VDC (ike klaasị 2 nwere oke) (Fig. 3, pg. 10).
BAT FAIL NC, C, NO	Na-egosi ọnọdụ batrị dị ala, dịka ọmụmaatụ jikọọ na panel mkpu. Relay na-enwekarị ike mgbe ike DC dị. Ogo kọntaktị 1A @ 30VDC. A na-akọ batrị ewepụrụ n'ime nkeji ise. A na-akọ njikọghachi batrị n'ime nkeji 1 (ike klaasị 2 nwere oke) (Fig. 3,pg. 10).
+ BAT -	Njikọ batrị kwụrụ ọtọ. Ọnụ ego kacha dị ugbu a 1.54A (enweghị oke ike) (Fig. 3, pg. 10).

Nweta njirimara njedebe onye njikwa ike

Akụkọ Mgbe Ebighị Ebi	Ọrụ/Nkọwa
– Ike +	12VDC ma ọ bụ 24VDC si ike ọkọnọ / chaja (ụlọ ọrụ ejikọrọ). Ọnụ ọnụ ndị a na-ejikọta na njedebe [- Control +].
– Njikwa +	Ọnụ ọnụ ndị a na-ejikọta ọnụ na ọdụ [- Power +]. Enwere ike ijikọ ọnụ ọnụ ndị a na ọkụ ọkụ njikwa ohere nwere oke ike edepụtara na mpụga iji nye ike ọrụ dịpụrụ adịpụ maka ngwaọrụ (UL anaghị enyocha ya). A ga-ewepụrịrị jumpers J1 na J2.
NDỊ MMADỤ 1- NTỤTA 8 IN, GND	Site na ntinye na-emepe emepe na/ma ọ bụ meghere ihe ntinye ihe na-emepe onye na-anakọta ihe (rịọ ka ịpụ bọtịnụ, ọpụpụ pir, wdg)
Mpụta 1- Mbupute 8 NC, C, NO, COM	12VDC ruo 24VDC na-akpalite nsonaazụ a na-achịkwa. Ibu kacha kwa mmepụta bụ 2.5A.
	Maximal11F: P/S 1 – 10.1-13.2VDC @ 3.3AP/S 2 – 10.1-13.2VDC @ 3.3A ma ọ bụ P/S 1 – 20.28-26.4VDC @ 3.6AP/S 2 – 20.28-26.4V3.6 1-10.1VDC @ 13.2A na P/S 3.3 - 2-20.28VDC @ 26.4A.
	Maximal33F: P/S 1 – 10.0-13.2VDC @ 5.3AP/S 2 – 10.0-13.2VDC @ 5.3A ma ọ bụ P/S 1 – 20.28-26.4VDC @ 5.6AP/S 2 – 20.28-26.4V5.6 1-10.0VDC @ 13.2A na P/S 5.3 - 2-20.28VDC @ 26.4A.
	Maximal55F: P/S 1 – 10.03-13.2VDC @ 9.3A na P/S 2 – 10.03-13.2VDC @ 9.3A.
	Maximal75F: P/S 1 – 10.03-13.2VDC @ 9.3A na P/S 2 – 20.17-26.4VDC @ 9.6A.
	Maximal77F: P/S 1 – 20.17-26.4VDC @ 9.6A na P/S 2 – 20.17-26.4VDC @ 9.6A.
	Ọdịda-Safe [NC positive (+) & COM Negative (-)], Fail-Secure [NO positive (+) & COM Negative (-)], mmepụta ihe enyemaka [C nti (+) & COM Negative (-)] ( Mgbe ị na-eji AC ike ọkọnọ polarity ekwesịghị ịhụ), NC, C, NO tọghatara akọrọ ụdị "C" 5A 24VAC/VDC gosiri akọrọ mmepụta mgbe fuses na-ewepụ. Egosiri kọntaktị na steeti anaghị akpalite.
FACP INTERFACE T, + INPUT –	Ọkụ mkpu Interface na-akpalite ntinye sitere na FACP. Ntinye ntinye nwere ike imeghe nke ọma, na-emechikarị ya site na mmepụta sekit mgbama FACP (Fig. 5-9, pg. 12).
FACP INTERFACE NC, C, NO	Ụdị kọntaktị relay “C” nwere akara @ 1A 28VDC maka mkpesa mkpu (UL anaghị enyocha ya).

Mpụta Board Na-enye Ike Voltage Ntọala

Nweta eserese ngwa ngwa njikwa ike (maka ACM8 ọ bụla)

kpachara anya: Mgbe edobere bọọdụ ọkọnọ ike maka 12VDC jiri naanị otu (1) 12VDC nọrọ na batrị.
Debe wiwi nwere oke ike na enweghị oke.
Jiri ohere kacha nta 0.25 inch.
Batrị 12AH nwere ike ịgbanye bụ batrị kachasị ukwuu nwere ike dabara na ogige a. Ekwesịrị iji mkpuchi batrị mpụga edepụtara UL ma ọ bụrụ na ị na-eji batrị 40AH ma ọ bụ 65AH.

Achọrọ Wiring nwere oke ike NEC

Wiring sekit nwere oke na enweghị ike ga-anọrịrị iche na kọbọd. Waịkọ sekit niile nwere oke ike ga-adịrịrị opekata mpe 0.25” pụọ na wiwi sekit ọ bụla na-enweghị oke. Ọzọkwa, eriri sekit niile nwere oke ike na eriri sekit na-enweghị ike ga-abanye ma pụọ na kabinet site na ụzọ dị iche iche.
Otu dị otú ahụ exampE gosipụtara nke a n'okpuru. Ngwa gị akọwapụtara nwere ike ịchọ ka a ga-eji mkpọpu ikuku dị iche iche. Enwere ike iji ọkpọ ọkpọ ọ bụla mee ihe. Maka ngwa nwere oke ike iji conduit bụ nhọrọ. A ga-emerịrị njikọ wiwi ubi niile na-eji waya CM ma ọ bụ FPL nwere jaket dabara adaba (ma ọ bụ ihe dochie ya).
Nhọrọ UL Edepụtara batrị ga-agbanyerịrị n'akụkụ ọkụ ọkụ site na usoro wiring Class 1.
Maka nrụnye Canada na-eji wiwi mkpuchi mkpuchi maka njikọ niile.
Mara: Rụtụ aka na eserese njikwa waya dị n'okpuru maka ụzọ kwesịrị ekwesị isi wụnye waya CM ma ọ bụ FPL nwere jaketị (Fig 4a).

Enwere oke ike maka Maximal11F.
Enweghị oke ike maka Maximal33F, Maximal55F,
Maximal75F, na Maximal77F.

Eserese FACP nko-elu

Ihe osise 5
Mkpịsị aka nhọrọ site na iji ntinye ọkụ abụọ (2) dịpụrụ adịpụ (naanị ọdabara na Maximal11F, UL anaghị enyocha ya):

Ihe osise 6
Ntinye ngbanwe polarity sitere na mmepụta sekit mgbama FACP (a na-ezo aka na polarity na ọnọdụ mkpu):

Ihe osise 7
Na-emepe emepe: Ntinye mkpalite FACP anaghị ejide ya:

Ihe osise 8
Mepee ngwa ntinye FACP Latching na iji ntọgharị:

Ihe osise 9
Emechiri nke ọma: Ntinye mkpalite FACP anaghị ejide ya:

Ihe osise 10
Emechiri nke ọma: Njide ntinye mkpalite FACP yana nrụpụta:

Akụkụ Mkpuchi (H x W x D ihe ruru):
26" x 19" x 6.25" (660.4mm x 482.6mm x 158.8mm)

Altronix abụghị maka mmejọ ederede ọ bụla.
140 58th Street, Brooklyn, New York 11220 USA | ekwentị: 718-567-8181 | faksị: 718-567-9056
websaịtị: www.altronix.com | ozi-e: info@altronix.com | Akwụkwọ ikike ndụ
IIMaximal11F/33F/55F/75F/77F Series

Enwere ike ijikwa ma nyochaa ike inye/ chaja eFlow mgbe a na-akọ akụkọ
Ike/nchọpụta nyocha sitere na ebe ọ bụla karịrị netwọk…

LINQ2 - Module Nkwukọrịta netwọkụ
LINQ2 na-enye ohere IP dịpụrụ adịpụ ịnweta data ozugbo sitere na eFlow ike ọkọnọ / chaja iji nyere aka mee ka sistemụ na-arụ ọrụ na ọkwa kachasị mma. Ọ na-eme ka nrụnye ngwa ngwa ma dị mfe na nhazi, na-ebelata oge nkwụsị nke usoro, ma wepụ oku ọrụ na-adịghị mkpa, nke na-enyere aka belata mkpokọta ọnụ ahịa nke nwe (TCO) - yana ịmepụta isi iyi ọhụrụ nke Recurring Monthly Revenue (RMR).

Atụmatụ

Edepụtara UL na US na Canada.
Njikwa mpaghara ma ọ bụ nke dịpụrụ adịpụ ruo (2) mmepụta ike Altronix eFlow abụọ site na LAN na/ma ọ bụ WAN.
Nyochaa nchọpụta oge n'ezie: mmepụta DC voltage, mmepụta ugbu a, AC & batrị ọnọdụ/ọrụ, ntinye ihe na-akpalite mgbanwe steeti, mgbanwe ọnọdụ mmepụta na otu okpomọkụ.

Njikwa ohere na njikwa onye ọrụ: Machibido ịgụ/dee, machibido ndị ọrụ ka ha nweta akụrụngwa akọwapụtara
Ụdị netwọọkụ abụọ (2) na-achịkwa Ụdị "C" Relays.
Ihe ntinye atọ (3) nwere ike ime mmemme: njikwa relays na ike ọkụ site na isi mmalite ngwaike mpụga.
Ozi email na Windows Dashboard
ndekọ ihe omume na-edekọ akụkọ ihe mere eme.
Secure Socket Layer (SSL).
Enwere ike ime ya site na USB ma ọ bụ web ihe nchọgharị – gụnyere ngwanrọ na-arụ ọrụ na eriri USB ft. 6.

LINQ2 na-agbago n'ime ogige MaximalF ọ bụla

Maximal11F/33F/55F/75F/77F Usoro nnweta ike njikwa (Fused) Ntuziaka nwụnye

Akwụkwọ / akụrụngwa

Altronix MAXIMAL77F Kachasị F Series Dual ike nnweta ikike njikwa ike [pdf] Ntuziaka nwụnye
MAXIMAL77F, Maximal F Series, Dual Power Supply Access Controllers, MAXIMAL77F Maximal F Series Dual Power Supply Access Power Controllers, Maximal F Series Dual Power Supply Access Power Controllers, Power Supply Access Power Controllers, Access Controllers, Power Controllers, Controllers

Ntụaka

Akwụkwọ ntuziaka onye ọrụ

Altronix MAXIMAL77F Kachasị F Series Dual ike nnweta ikike njikwa ike

Dị Gụnyere

Usoro MaximalF gafereview