Altronix Maximal3FD Otu ike na-enweta ikike nchịkwa ikike

MaximalFD Series gafereview

Altronix MaximalFD Access Power/Controllers na-ekesa ma gbanwee ike iji nweta sistemụ njikwa na ngwa. Ha na-atụgharị ntinye 120VAC 60Hz ka ọ bụrụ iri na isii (16) 12VDC ma ọ bụ 24VDC PTC na-achịkwa onwe ya. A na-arụ ọrụ mmepụta ya site na sink na-emeghe ma ọ bụ na-emepekarị (NO) akọrọ akọrọ ntinye ntinye site na Access Control System, Keypad, Push Button, REX PIR, wdg. nkeji ga-ebufe ike na ngwaọrụ dị iche iche nke njikwa ngwaike gụnyere Mag Locks, Ọkụ eletrik, ndị na-ejide ọnụ ụzọ ndọta, wdg FACP Interface na-enyere aka mgbapụ ihe mberede, na nlekota mkpu, ma ọ bụ enwere ike iji kpalite ngwaọrụ inyeaka ndị ọzọ. A na-ahọrọ njirimara nkwụsị ọkụ ọkụ n'otu n'otu maka ihe ọ bụla ma ọ bụ niile nke iri na isii (16). Ngwa niile ejikọrọ ga-abụrịrị UL Edepụtara.

Chart nhazi usoro MaximalFD

Nọmba Model Altronix

120VAC 60Hz Ntinye ugbu a

Ngosipụta Fuse Board na-enye ike

Ngosipụta ọkụ na-enye bọọdụ ike batrị fuse

Ntinye DC nke aha Voltage

Ọnụnọ kacha ugbu a maka Main na Aux. Mpụta na bọọdụ na-ebunye ọkụ yana ihe ACM8CB nweta njikwa ike (A)

PTC echekwara Mpụta nwere oke ike

Ihe mmepụta ACM8CB dị ugbu a (A)

ACM8CB Ntinye ntinye Fuse Rating

Ngosipụta PTC nke bọọdụ ACM8CB

[DC]

[Aux]

Oke mmepụta 12VDC (V)

Oke mmepụta 24VDC (V)

Oke mmepụta 12VDC (V)

Oke mmepụta 24VDC (V)

Oke 3FD

3.5A

5A /

10A /

9.7-

19.8-

10.03-

20.19-

12VDC @ 4.6A ma ọ bụ

16

2.5

10A /

2.5A /

250V

32V

13.2

26.4

13.2

26.4

24VDC @ 5.2A

250V

250V

Oke 5FD

3.5A

5A /

15A /

9.7-

-

10.03-

-

8.6A

16

2.5

10A /

2.5A /

250V

32V

13.2

13.2

250V

250V

Oke 7FD

4.5A

6.3A /

15A /

-

19.8-

-

20.28-

9.2A

16

2.5

10A /

2.5A /

250V

32V

26.4

26.4

250V

250V

Ndepụta ụlọ ọrụ

Ndepụta UL maka
Nwụnye US: UL 294* - UL Edepụtara maka nkeji sistemụ njikwa ohere.
*ANSI/UL 294 7th Ed. Nweta ọkwa arụmọrụ njikwa:
Mwakpo mbibi – I; Ntachi obi - I; Nchekwa ahịrị - I; Njikere site na ike – II, III, IV.
Ndepụta UL maka
Nrụnye Canada: ULC-S319-05 – Ngwa klaasị nke sistemu nnweta eletrọnịkị.
CSA C22.2 No.205 - Ngwa mgbaama.

ULC-S319-05 Sistemụ njikwa nnweta eletrọnịkị ga-emebi site na iji mgbakwunye, mgbasawanye, ebe nchekwa ma ọ bụ modul ọzọ nke onye nrụpụta ma ọ bụ ndị nrụpụta ndị ọzọ rụpụtara.

Atụmatụ usoro MaximalFD

ACM8CB modul njikwa ike ịnweta ike:

• Iri na isii (16) na-ebute nsonaazụ a na-achịkwa n'onwe ya. Nhọrọ mmepụta:
  • Iri na isii (16) mpụta ike nzacha nke dara ada.
  • Iri na isii (16) Nwepụta ike nzacha nke ọma.
  • Ngwakọta ọ bụla nke dị n'elu.
• Iri na isii (16) Ntinye njikwa sistemụ na-akpalite ntinye. Nhọrọ ịkpalite ntinye:
  • Iri na isii (16) na-emeghekarị ihe ntinye mkpalite nkụ.
  • Ntinye iri na isii (16) mepere emepe.
  • Ngwakọta ọ bụla nke dị n'elu.
• Iri na isii (16) aux agbachabeghị. mmepụta ike (a na-edepụta mmepụta @ 2.5A).
• Igwe ọkụ na-acha uhie uhie na bọọdụ ACM8CB na-egosi na a na-ebute nsonaazụ nke onye ọ bụla (gbanye ọkụ).
• Mwepu mkpu oku ọkụ (latching ma ọ bụ enweghị nkwụsị) bụ nke a na-ahọrọ n'otu n'otu maka ihe ọ bụla ma ọ bụ niile nke iri na isii (16).
  Nhọrọ ntinye ihe mgbanye mgbanyụ ọkụ:
  • Ndenye mkpalite akọrọ na-emepe nke ọma (MENWEE) ma ọ bụ mechiri emechi (NC).
  • Ntinye ngbanwe polarity sitere na sekit mgbama FACP.
• Green LED na bọọdụ ACM8CB na-egosi nkwupu FACP kpalitere.
• Mgbasa ozi FACP na-egosi na ntinye FACP na-akpalite (ụdị kọntaktị "C" nke akara @ 1A/28VDC UL anaghị enyocha ya).
• Igwe ọkụ na-ebunye / chaja eFlow na-enye ike nkịtị maka bọọdụ njikwa ike ịnweta ACM8CB (wiring ụlọ ọrụ) yana ngwaọrụ njikwa ohere niile ejikọrọ (wiring ubi).
• ACM8CB bọọdụ isi fuses ka akara @ 10A. A na-edepụta PTCs @ 2.5A.

EFlow Ike ọkọnọ/Chaja

• Ntinye: 120VAC, 60Hz.
• Maka mmepụta voltage na ịnye ugbu a na-ezo aka na MaximalFD usoro nhazi Chart, pg. 3.
• Mpempe enweghị oke ike inyeaka enwetara @ 1A (anaghị agbanwe agbanwe).
• Mfefetage nchedo.
• Chaja arụnyere n'ime maka acid a na-emechi ma ọ bụ batrị ụdị batrị.
• Ọnụ ego kachasị ugbu a 1.54A.
• Gbanwee akpaaka ka batrị nọrọ na-echere mgbe AC ​​dara. Nyefee na ike batrị na-echere bụ ozugbo na enweghị nkwụsị.
• Ikwupu mkpu ọkụ ọkụ na-elekọta (latching ma ọ bụ enweghị ike) 10K EOL resistor. Na-arụ ọrụ na ihe mkpalite na-emepe emepe (NO) ma ọ bụ mechiri emechi (NC).
• AC dara nlekota (ụdị kọntaktị "C").
• Batrị dara na nlekọta ọnụnọ (ụdị kọntaktị "C").
• Nkwụsị ike dị ala. Na-emechi ọnụ ụzọ mmepụta DC ma ọ bụrụ na batrị voltage tụlee n'okpuru 71-73% maka 12V nkeji na 70-75% maka 24V nkeji (dabere na ike ọkọnọ). Na-egbochi mmịpụ batrị miri emi.
• Maka ọkwa fiusi rụtụ aka na Chart nhazi usoro MaximalFD, pg. 3.
• Green AC Power LED na-egosi 120VAC dị ugbu a.
• Ntinye AC na ihe ngosi LED nke DC.
• Mkpirisi sekit na oke nchebe.
• Mkpọchi na-anabata ihe ruru batrị anọ (4) 12VDC/12AH.
• Akụkụ mkpuchi (H x W x D): 26" x 19" x 6.25" (660.4mm x 482.6mm x 158.8mm).

Ntuziaka nwụnye MaximalFD

Ụzọ wiwi ga-adị n'ụzọ kwekọrọ na National Electric Code/NFPA 70/ANSI, Canadian Electric Code, Part I, Part II yana koodu mpaghara na ndị ọchịchị niile nwere ikike. Ezubere ngwaahịa maka naanị ime ụlọ.

Nchọpụta Ọkụ Ọkụ Na-enye Ike LED Diagnostics	(pg. 7)
Ịnweta ihe nleba anya nke ọkụ ọkụ LED	(pg. 7)
Nkọwapụta batrị na-akwado bọọdụ na-eweta ike	(pg. 7)
Ngosipụta njedebe Board Supply Board	(pg. 8)
Nweta njirimara njedebe onye njikwa ike	(pg. 8)
Mpụta Board Na-enye Ike Voltage Ntọala	(pg. 9)
Nweta eserese ngwa ngwa njikwa ike	(pg. 9)
Eserese FACP/Nhọrọ inye nkonye ike	(pg. 12)

1. Wunye unit n'ebe achọrọ. Kaa akara na prerill oghere na mgbidi ka kwụ n'ahịrị n'ahịrị igodo atọ dị n'elu n'ogige ahụ. Wụnye ihe nkwụnye elu atọ na kposara na mgbidi na isi ihe nkedo na-apụta. Tinye oghere igodo elu nke ogige ahụ n'elu skru atọ dị elu, dị larịị na nchekwa. Kaa akara ọnọdụ nke oghere atọ dị ala. Wepu ihe mkpuchi ahụ. Gwuo oghere ndị dị ala ma wụnye ngwa ngwa atọ. Tinye oghere igodo elu nke ogige ahụ n'elu skru atọ dị elu. Wụnye skru atọ dị ala ma jide n'aka na ị ga-eme ka skru niile sie ike (Mpaghara mkpuchi, pg. 15).
2. Jikọọ ike AC akwụghị ụgwọ (120VAC 60Hz) na njedebe akara [L, N] (Fig 3, pg. 10). Green “AC” LED na bọọdụ ọkọnọ ike ga-agbanye. Enwere ike ịhụ ọkụ a site na oghere LED na ọnụ ụzọ nke ogige ahụ. Jiri 14 AWG ma ọ bụ karịa maka njikọ ike niile. Ekwentị akwụkwọ ndụ akwụkwọ ndụ waya na-eduga n'ala ala. Debe wiwi nwere oke ike na wiwi na-enweghị oke.
   Opekempe 0.25" oghere ga-enyerịrị (Fig 3, pg. 10).
   kpachara anya: Emetụla akụkụ ọla ndị ekpughere ekpughere aka. Mechie ike sekit alaka ụlọ ọrụ tupu ịwụnye ma ọ bụ na-arụ ọrụ. Enweghị akụkụ ndị ọrụ ga-arụ ọrụ n'ime. Tụtụ aka na nrụnye na ọrụ nye ndị ọrụ ruru eru.
3. Họrọ mmepụta DC chọrọ voltage site na ịtọ SW1 n'ọnọdụ kwesịrị ekwesị na ike ọkụ Maximal3FD (Fig 1a, pg. 9). Maximal5FD ike ọkọnọ bụ factory atọrọ na 12VDC na Maximal7FD ike ọkọnọ bụ factory atọrọ na 24VDC.
4. Tule mmepụta voltage nke unit tupu ijikọ ngwaọrụ ọ bụla iji hụ na arụ ọrụ kwesịrị ekwesị. Na-ezighi ezi ma ọ bụ elu voltage ga-emebi ngwaọrụ ndị a.
5. Nhọrọ mmepụta (Fig. 2, pg. 9):
   Ngalaba ahụ ga-enye ma ọ bụ iri na isii (16) mpụta ike gbanwere, iri na isii (16) ụdị akọrọ "C" pụta, ma ọ bụ ihe ọ bụla ngwakọta nke ma gbanwee ike na ụdị "C" pụta.
   • Mbupute ọkụ agbanwere adịghị mma:
     Maka arụmọrụ Fail-Safe jikọọ ndenye dị mma (+) nke ngwaọrụ njikwa ohere na njedebe akara [NC]. Jikọọ ntinye adịghị mma (-) nke ngwaọrụ njikwa ohere na njedebe akara [COM].
   • Mbupute ọkụ agbanweela nke ọdịda-echekwabara:
     Maka ọrụ Fail-Secure jikọọ ndenye dị mma (+) nke ngwaọrụ njikwa ohere na njedebe akara [NO]. Jikọọ ntinye adịghị mma (-) nke ngwaọrụ njikwa ohere na njedebe akara [COM].
6. Ihe nrụpụta ike inyeaka ACM8CB (anaghị agbanwe agbanwe):
   Jikọọ ngwaọrụ njikwa ohere nke chọrọ ike mgbe niile na njedebe akara [C] nti (+) na [COM] adịghị mma (-).
   Nsonaazụ inyeaka eFlow (anaghị agbanwe):
   Maka njikọ ngwaọrụ inyeaka agaghị emetụta mmepụta a site na Nkwụsị Ike dị ala ma ọ bụ Interface Oti mkpu. Jikọọ ngwaọrụ na njedebe akara [+ AUX -] (Fig. 3, pg. 10).
7. Nhọrọ ntinye ntinye (Fig. 2, pg. 9):
   • Mepee mkpalite ntinye [NO] na-emekarị:
     Ntinye 1-8 na-arụ ọrụ site na ntinye sink na-emeghe ma ọ bụ nke mepere emepe. Jikọọ ntinye njikwa njikwa ohere, ahụigodo, bọtịnụ ntinye, REX PIRs, wdg na njedebe akara [IN] na [GND].
   • Mepee ntinye ihe ngbasa ozi:
     Jikọọ ogwe njikwa ohere mepere onye na-anakọta sink positive (+) na ọdụ akara akara [IN] yana nke ọjọọ (-) na njedebe akara [GND].
8. Nhọrọ Interface Oti mkpu ACM8CB (Figs. 5-9, pg. 12):
   Ntinye ntinye nke emechiri emechi [NC] ma ọ bụ nke na-emeghe [NO] site na ogwe njikwa ọkụ ma ọ bụ ndenye ngbanwe polarity sitere na sekit mgbama FACP ga-emetụta nsonaazụ ahọpụtara.
   Iji mee ka Kwụsị FACP maka mmepụta, gbanyụọ mgba ọkụ kwekọrọ na bọọdụ ACM1CB ọ bụla. Iji gbanyụọ nkwụsị FACP maka mmepụta, gbanye mgba ọkụ (s) [SW8-SW8] kwekọrọ na bọọdụ ACM1CB ọ bụla.
   • Ntinye [NO] na-emepe nke ọma:
     Maka nko-elu na-adịghị ejigide na-ezo aka na Fig. 6, pg. 12. N'ihi na latching nko-elu na-ezo aka na Fig. 7, pg. 12.
   • Ntinye [NC] na-emechikarị:
     Maka nko-elu na-adịghị ejigide na-ezo aka na Fig. 8, pg. 12. N'ihi na latching nko-elu na-ezo aka na Fig. 9, pg. 12.
   • Ihe mkpali ntinye sekit mgbama FACP:
     Jikọọ ihe dị mma (+) na nke na-adịghị mma (-) site na mmepụta sekit mgbama FACP na njedebe akara [+ INP -]. Jikọọ FACP EOL na njedebe akara [+ RET -] (a na-ezo aka na polarity
     na ọnọdụ mkpu). Jumper dị n'akụkụ TRG LED ga-ebipụ (Fig 2a, pg. 9 na Fig. 5, pg. 12).
9. Ụdị akọrọ FACP “C” mmepụta (UL anaghị enyocha ya) (Fig. 2b, pg. 9):
   FACP ụdị "C" nwere ike iji kpalite mkpesa ma ọ bụ ngwaọrụ mgbaàmà. Mgbanwe kọntaktị ndị a
   n'elu ntinye mkpu ọkụ na-akpalite na bọọdụ ACM8CB.
10. Njikọ batrị guzoro n'akụkụ (Fig. 3, pg. 10):
    Maka ngwa njikwa nnweta US batrị bụ nhọrọ. Achọrọ batrị maka nrụnye Canada (ULC-S319). Mgbe ejighị batrị, mfu nke AC ga-ebute mfu nke mmepụta voltage. Mgbe achọrọ iji batrị na-echere, ha ga-abụrịrị acid acid ma ọ bụ gel ụdị. Jikọọ batrị na njedebe akara [- BAT +] (Fig 3, pg. 10). Jiri batrị abụọ (2) 12VDC ejikọrọ n'usoro maka ọrụ 24VDC (edu batrị gụnyere). Jiri batrị - Casil CL1270 (12V / 7AH), CL12120 (12V / 12AH), CL12400 (12V / 40AH), CL12650 (12V / 65AH) batrị ma ọ bụ UL ghọtara batrị BAZR2 na BAZR8 nke ọkwa kwesịrị ekwesị.
11. Ihe nrụpụta batrị na AC (Fig 3, pg. 10):
    Ọ chọrọ ijikọ ngwaọrụ mkpesa nsogbu nlekọta na nsonaazụ akara [AC Fail, BAT Fail] akara nrụnye nlegharị anya [NC, C, NO] na ngwaọrụ ngosi ngosi kwesịrị ekwesị.
    Jiri 22 AWG ruo 18 AWG maka ọdịda AC yana obere mkpesa batrị.
12. Iji gbuo oge mkpesa AC maka awa 2, tọọ mgbanwe DIP [AC Delay] ka ọ bụrụ ọnọdụ gbanyụọ (Fig 3, pg. 10).
    Iji gbuo oge mkpesa AC maka 1 min., tọọ mgbanwe DIP [AC Delay] na ọnọdụ ON (Fig 3, pg. 10).
13. Kwupu oti mkpu ọkụ (Fig. 3, pg. 10):
    Iji mee ka Mwapu Mkpu Mkpu ọkụ tọọ ịgbanwee DIP [Mkpuchi] gaa na ọnọdụ ON.
    Iji gbanyụọ mgbanyụọ mkpu ọkụ, tọọ mgba ọkụ DIP [Mkpuchi] ka ọ bụrụ gbanyụọ.
14. Ntinye nke Tamper Switch (Fig. 3b, pg. 10):
    Ugwu UL Edepụtara tamper mgba ọkụ (Altronix nlereanya TS112 ma ọ bụ dakọtara) n'elu nke ogige. Gbanye tamper mgbanaka nkwado n'elu nsọtụ nke ogige ahụ dị ka 2" site n'akụkụ aka nri (Fig. 3b, pg. 10). Jikọọ tampgbanwee wiring gaa na ntinye Ogwe njikwa nnweta ma ọ bụ ngwaọrụ mkpesa UL Edepụtara kwesịrị ekwesị. Iji mee ka mgbaama mkpu rụọ ọrụ, mepee ọnụ ụzọ ogige ahụ.
15. Ntinye ọkụ ọtụtụ (Fig. 2, pg. 9) (UL anaghị enyocha ya):
    Mgbe ị na-eji mgbakwunye ike mpụga Edepụtara, ndị jumpers J1 na J2 dị na bọọdụ ACM8CB kwekọrọ ga-ebipụ (Fig 2c, pg. 9 na Fig. 5, pg. 12). Jikọọ mpụga Edepụtara ikike njikwa ohere nwere oke ike na ọdụ akara akara [- Control +] (Nkwụsị ndị a na-adakọ na ọdụ [- Power +]). Mgbe ị na-eji akụrụngwa ọkụ DC, a ga-ahụrịrị polarity. Mgbe ị na-eji ọkụ ọkụ AC, ọ dịghị mkpa ka a hụ polarity (Fig 2d, pg. 9). A ghaghị ime njikọ wiring ubi niile na-eji waya CM ma ọ bụ FPL nwere jaket dabara adaba (ma ọ bụ ihe dochie anya) (Fig. 4a, pg. 11).

Nlekọta

A ga-anwale nkeji opekata mpe otu ugboro n'afọ maka ịrụ ọrụ kwesịrị ekwesị dịka ndị a:

• Nlekọta FACP: Iji hụ na njikọ kwesịrị ekwesị na ịrụ ọrụ nke nkwụnye nkwụnye ọkụ ọkụ, biko soro usoro kwesịrị ekwesị n'okpuru:
  • Ntinye na-emepe emepe: Ịtụnye obere oge n'etiti ọnụ ụzọ akara [T] na [+ INP] ga-akpalite nkwụsị ọkụ ọkụ. Wepu mkpụmkpụ ka ịtọgharịa.
  • Ntinye na-emechikarị: Iwepu waya site na ọdụ akara akara [INP –] ga-akpalite nkwupu mkpu ọkụ. Dochie waya ka ọ bụrụ ebe akara akara [INP –] iji tọgharịa.
• Ntinye sekit mgbama FACP: Ọ dị mkpa ịkpalite Sistemụ Mkpu ọkụ. N'ọnọdụ ndị a niile, TRG LED nke ACM8CB ga-enwu. Nsonaazụ niile ahọpụtara maka Mgbasa Mkpu Mkpuchi Ọkụ ga-eme ka ewepụtara ngwaọrụ mkpọchi.

Mara: Mpụta niile [OUT 1] - [OUT 8] ga-abụrịrị n'ọnọdụ nkịtị (de-ike) tupu anwale. Mgbe a na-ahazi unit ahụ maka Mepee Nkịtị (Fig 7, pg. 12) ma ọ bụ na-emechikarị (Fig 9, pg. 12) arụ ọrụ latching ọ dị mkpa iji tọgharịa Mkpuchi Mkpuchi Ọkụ site n'ịgbalite Nrụgharị Nrụgharị emechikarị.

• Mmepụta Voltage nwale: N'okpuru ọnọdụ ibu nkịtị, mmepụta DC voltage kwesịrị ịlele nke ọma voltage larịị (tụ aka na MaximalFD usoro nhazi Chart, pg. 3).
• Nnwale batrị: N'okpuru ọnọdụ ibu nkịtị lelee na chajịrị batrị zuru oke, lelee voltaji akọwapụtaratage na ọdụ batrị yana na bọọdụ akara akara [+ BAT -] iji hụ na enweghị nkwụsịtụ na wires njikọ batrị.
  Mara: Ọnụ ego kachasị ugbu a bụ 1.54A. Ndụ batrị tụrụ anya bụ afọ 5; Otú ọ dị, a na-atụ aro ka ịgbanwe batrị n'ime afọ 4 ma ọ bụ obere ma ọ bụrụ na ọ dị mkpa.

Nchọpụta Ọkụ Ọkụ Na-enye Ike LED Diagnostics

Uhie (DC)	Green (AC/AC1)	Ọkwa inye ike
ON	ON	Ọnọdụ ọrụ nkịtị.
ON	Gbanyụọ	Mfu nke AC. Batrị echere na-enye ike.
Gbanyụọ	ON	Enweghị mmepụta DC.
Gbanyụọ	Gbanyụọ	Mfu nke AC. Achụpụrụ ma ọ bụ enweghị batrị na-echere. Enweghị mmepụta DC.

Uhie (Bat)	Ọnọdụ batrị
ON	Ọnọdụ ọrụ nkịtị.
Gbanyụọ	Batrị ada ada/obere batrị.

Ịnweta ihe nleba anya nke ọkụ ọkụ LED

Ikanam	ON	Gbanyụọ
LED 1-Ikanam 8 (Uhie)	Mbupute relay (s) na-enye ike.	Mgbasa ozi (s) arụpụtaghị ike.
Trg (Green)	Ntinye FACP kpalitere (ọnọdụ mkpu).	FACP nkịtị (ọnọdụ enweghị mkpu).

Nkọwapụta batrị na-akwado bọọdụ na-eweta ike

Batrị	Oke 3FD	Oke 5FD	Oke 7FD
7 AH	Nkeji 10/6A	Nkeji 5/10A	Nkeji 5/10A
12 AH	Nkeji 30/6A*	Nkeji 30/10A*	Nkeji 30/10A*
40 AH	Ihe karịrị awa anọ/4A*	Ihe karịrị awa anọ/2A*	Ihe karịrị awa anọ/2A*
65 AH	Ihe karịrị awa anọ/4A*	Ihe karịrị awa anọ/4A*	Ihe karịrị awa anọ/4A*

* Naanị nhazi ndị a ka enwere ike iji na nrụnye ULC-S319.

Ngosipụta njedebe Board Supply Board

Akụkọ Mgbe Ebighị Ebi	Ọrụ/Nkọwa
L, G, N	Jikọọ 120VAC 60Hz na njedebe ndị a: L na-ekpo ọkụ, N na-anọpụ iche. Ejila ọnụ akara [G].
+ DC -	Ụlọ ọrụ ejikọrọ na bọọdụ ACM8CB.
A na-ahụ maka mkpali EOL	Ọkụ mkpu Interface na-akpalite ntinye site na mkpụmkpụ ma ọ bụ FACP. Ntinye ntinye nwere ike imeghe nke ọma, na-emechikarị ya site na sekit mmepụta FACP (ntinye nwere oke ike klaasị 2) (Fig. 3, pg. 10).
Mba, Ntọgharịa GND	FACP interface latching ma ọ bụ na-adịghị ekpuchi (Klas 2 nwere oke ike) (Fig 3, pg. 10).
+ AUX –	klaasị inyeaka 2 mmepụta nwere oke ike nwere ọkwa @ 1A (anaghị agbanwe ya) (Fig 3, pg. 10).
AC FAIL NC, C, NO	Na-egosi mfu nke ike AC, dịka ọmụmaatụ jikọọ na ngwaọrụ a na-anụ ma ọ bụ ogwe mkpu. Relay na-enwekarị ike mgbe ike AC dị. Ogo kọntaktị 1A @ 30VDC (ike klaasị 2 nwere oke) (Fig. 3, pg. 10).
BAT FAIL NC, C, NO	Na-egosi ọnọdụ batrị dị ala, dịka ọmụmaatụ jikọọ na panel mkpu. Relay na-enwekarị ike mgbe ike DC dị. Ogo kọntaktị 1A @ 30VDC. A na-akọ batrị ewepụrụ n'ime nkeji ise. A na-akọ njikọghachi batrị n'ime nkeji 1 (ike klaasị 2 nwere oke) (Fig. 3,pg. 10).
+ BAT -	Njikọ batrị kwụrụ ọtọ. Ọnụ ego kacha dị ugbu a 1.54A (enweghị oke ike) (Fig. 3, pg. 10).

Nweta njirimara njedebe onye njikwa ike

Akụkọ Mgbe Ebighị Ebi	Ọrụ/Nkọwa
– Ike +	12VDC ma ọ bụ 24VDC si ike ọkọnọ / chaja (ụlọ ọrụ ejikọrọ). Ọnụ ọnụ ndị a na-ejikọta na njedebe [- Control +].
– Njikwa +	Ọnụ ọnụ ndị a na-ejikọta ọnụ na ọdụ [- Power +]. Enwere ike ijikọ ọnụ ọnụ ndị a na ọkụ ọkụ njikwa ohere nwere oke ike edepụtara na mpụga iji nye ike ọrụ dịpụrụ adịpụ maka ngwaọrụ (UL anaghị enyocha ya). A ga-ewepụrịrị jumpers J1 na J2.
NDỤMỌDỤ NDỊ NA-ARỤTA 1 - NTỤTA 8 IN, GND	Site na ntinye na-emepe emepe na/ma ọ bụ meghere ihe ntinye ihe na-emepe onye nchịkọta (rịọ ka ịpụpụ bọtịnụ, pụọ ​​PIRs, wdg)
Mpụta 1- Mbupute 8 NC, C, NO, COM	12VDC ruo 24VDC na-eme ka a na-achịkwa ihe nrụpụta na 2.5A. Maximal3FD - 9.7-13.2VDC @ 4.6A ma ọ bụ 19.8-26.4VDC @ 5.2A. Maximal5FD - 9.7-13.2VDC @ 8.6A. Maximal7FD - 19.8-26.4VDC @ 9.2A. Fail-Safe [NC positive (+) na COM Negative (-)], Fail-Secure [NO positive (+) na COM Negative (-)], mmepụta ihe enyemaka [C positive (+) na COM Negative (-)]. Mgbe ị na-eji AC ike ọkọnọ, ekwesighi ịhụ polarity. Egosiri kọntaktị na steeti anaghị akpalite.
FACP INTERFACE T, + INPUT –	Ọkụ mkpu Interface na-akpalite ntinye sitere na FACP. Ntinye ntinye nwere ike imeghe nke ọma, na-emechikarị ya site na mmepụta sekit mgbama FACP (Fig. 5-9, pg. 12).
FACP INTERFACE NC, C, NO	Ụdị kọntaktị relay “C” nwere akara @ 1A 28VDC maka mkpesa mkpu (UL anaghị enyocha ya).

Mpụta Board Na-enye Ike Voltage Ntọala

Nweta eserese ngwa ngwa njikwa ike (maka ACM8CB ọ bụla)

Fig. 3 - Maximal3FD, Maximal5FD, na Maximal7FD

kpachara anya: Mgbe edobere bọọdụ ọkọnọ ike maka 12VDC jiri naanị otu (1) 12VDC nọrọ na batrị.
Debe wiwi nwere oke ike na enweghị oke. Jiri ohere kacha nta 0.25 inch.
Batrị 12AH nwere ike ịgbanye bụ batrị kacha ibu nwere ike dabara na ogige a. Ekwesịrị iji mkpuchi batrị mpụga UL edepụtara ma ọ bụrụ na ị na-eji batrị 40AH ma ọ bụ 65AH.

Achọrọ Wiring nwere oke ike NEC

Wiwi sekit nwere oke na enweghị ike ga-anọrịrị iche na kọbọd. Waịkọ sekit niile nwere oke ike ga-anọrịrị opekata mpe 0.25” pụọ na wiwi sekit enweghị oke ike. Ọzọkwa, eriri sekit niile nwere oke ike yana eriri sekit na-enweghị ike ga-abanye ma pụọ ​​​​na kabinet site na ụzọ dị iche iche. Otu dị otú ahụ exampE gosipụtara nke a n'okpuru. Ngwa gị akọwapụtara nwere ike ịchọ ka a ga-eji mkpọpu ikuku dị iche iche. Enwere ike iji ọkpọ ọkpọ ọ bụla mee ihe. Maka ngwa nwere oke ike iji conduit bụ nhọrọ. A ga-emerịrị njikọ wiwi ubi niile na-eji waya CM ma ọ bụ FPL nwere jaket dabara adaba (ma ọ bụ ihe dochie ya). Nhọrọ UL Edepụtara batrị ga-agbanyerịrị n'akụkụ ọkụ ọkụ site na usoro wiring Class 1. Maka nrụnye Canada na-eji wiwi mkpuchi mkpuchi maka njikọ niile.
Mara: Rụtụ aka na eserese njikwa waya dị n'okpuru maka ụzọ kwesịrị ekwesị isi wụnye waya CM ma ọ bụ FPL nwere jaketị (Fig 4a).

Eserese FACP nko-elu

Ihe osise 5 Ntinye ngbanwe polarity sitere na mmepụta sekit mgbama FACP (a na-ezo aka na polarity na ọnọdụ mkpu):

Ihe osise 6 Na-emepe emepe: Ntinye mkpalite FACP anaghị ejide ya:
Ihe osise 7 Mepee ngwa ntinye FACP Latching na iji nrụpụta
(UL enyochabeghị mmepụta a): 

Ihe osise 8 Emechiri nke ọma: Ntinye mkpalite FACP anaghị ejide ya:
Ihe osise 9 Emechiri nke ọma: Njide ntinye mkpalite FACP yana nrụpụta
(UL enyochabeghị mmepụta a):

Akụkụ Mkpuchi (H x W x D ihe ruru)

26" x 19" x 6.25" (660.4mm x 482.6mm x 158.8mm)

Enwere ike ijikwa ma nyochaa ike na-ebunye / chaja eFlow ka ị na-akọpụta ike / nyocha site na ebe ọ bụla.
na netwọkụ…

LINQ2 - Module Nkwukọrịta netwọkụ
LINQ2 na-enye ohere IP dịpụrụ adịpụ ịnweta data ozugbo sitere na eFlow ike ọkọnọ / chaja iji nyere aka mee ka sistemụ na-arụ ọrụ na ọkwa kachasị mma. Ọ na-eme ka nrụnye ngwa ngwa ma dị mfe na nhazi, na-ebelata oge nkwụsị nke usoro, ma wepụ oku ọrụ na-adịghị mkpa, nke na-enyere aka belata mkpokọta ọnụ ahịa nke nwe (TCO) - yana ịmepụta isi iyi ọhụrụ nke Recurring Monthly Revenue (RMR).

Atụmatụ

• Edepụtara UL na US na Canada.
• Njikwa mpaghara ma ọ bụ nke dịpụrụ adịpụ ruo (2) mmepụta ike Altronix eFlow abụọ site na LAN na/ma ọ bụ WAN.
• Nyochaa nchọpụta oge n'ezie: mmepụta DC voltage, mmepụta ugbu a, AC & batrị ọnọdụ/ọrụ,
  ndenye na-akpalite mgbanwe steeti, mgbanwe steeti mmepụta yana okpomọkụ otu.
• Njikwa ohere na njikwa onye ọrụ: Machibido ịgụ/dee, machibido ndị ọrụ ka ha nweta akụrụngwa akọwapụtara
• Ụdị netwọọkụ abụọ (2) na-achịkwa Ụdị "C" Relays.
• Ihe ntinye atọ (3) nwere ike ime mmemme: njikwa relays na ike ọkụ site na isi mmalite ngwaike mpụga.
• Ozi email na Windows Dashboard
• ndekọ ihe omume na-edekọ akụkọ ihe mere eme.
• Secure Socket Layer (SSL).
• Enwere ike ime ya site na USB ma ọ bụ web ihe nchọgharị – gụnyere ngwanrọ na-arụ ọrụ na eriri USB ft. 6.

LINQ2 na-agbago n'ime ogige MaximalF ọ bụla

Akwụkwọ / akụrụngwa

Altronix Maximal3FD Otu ike na-enweta ikike nchịkwa ikike [pdf] Ntuziaka nwụnye Maximal3FD, Maximal5FD, Single Power Supply Access Controllers, Nnweta ikike njikwa ike, nweta ikike njikwa, Maximal3FD, ike njikwa

Ntụaka

• Akwụkwọ ntuziaka onye ọrụ