Altronix Maximal11FV Kachasị FV Series Enwere ike ịnweta ike nrụnye ndị njikwa ike.

Altronix MaximalFV Access Power/Controllers na-ekesa ma gbanwee ike iji nweta sistemụ njikwa na ngwa. Ha na-atụgharị 220VAC (nke na-arụ ọrụ 198VAC - 256VAC), ntinye 50/60Hz n'ime iri na isii (16) na-achịkwa onwe ya 12VDC ma ọ bụ 24VDC fuse-fiusi. Enwere ike ịtụgharị nsonaazụ ike ndị a dị nfe-Safe/Fail-Secure ka ọ bụrụ kọntaktị “C”. A na-arụ ọrụ mmepụta ya site na sink onye na-anakọta oghe ma ọ bụ na-emeghekarị (NO) ntinye ọkụ ọkụ sitere na Sistemụ Njikwa Nweta, ahụigodo, bọtịnụ Push, REX PIR, wdg. nkeji ga-ebufe ike gaa n'ọtụtụ ngwaọrụ njikwa ngwaike gụnyere: Mag Locks , Eletriki Strikes, Magnetic Door Holders, wdg FACP Interface na-enyere aka Mberede Mberede, Oti mkpu, ma ọ bụ enwere ike iji kpalite ngwaọrụ inyeaka ndị ọzọ. A na-ahọrọ njirimara nkwụsị ọkụ ọkụ n'otu n'otu maka ihe ọ bụla ma ọ bụ niile nke iri na isii (16).

Chart nhazi usoro MaximalFV:

Nọmba Model Altronix	Ntinye DC nke aha Voltage Nhọrọ								Ọnụnọ kacha ugbu a maka Main na Aux. Nsonaazụ (Nnyefe Ike 1 / Ike 2) (A)	Ihe echekwabara fuse	Ntinye 220VAC 50/60 Hz (ugbu a)	Ihe mmepụta ACM8 dị ugbu a (A)	Ngosipụta Fuse Board na-enye ike	Ngosipụta ọkụ na-enye bọọdụ ike batrị fuse	Ntụnye Fuse Board ACM8
	Tụkwasịnụ Ike 1				Tụkwasịnụ Ike 2
	[DC]		[AUX]		[DC]		[AUX]
	Oke mmepụta 12VDC (V)	Oke mmepụta 24VDC (V)	Oke mmepụta 12VDC (V)	Oke mmepụta 24VDC (V)	Oke mmepụta 12VDC (V)	Oke mmepụta 24VDC (V)	Oke mmepụta 12VDC (V)	Oke mmepụta 24VDC (V)
Kachasị 11FV	eFlow4NBV				eFlow4NBV				-	16	4.2A	2.5	5A / 250V	7.5A / 32V	10A / 250V
	10.1- 13.2	-	10.05- 13.2	-	10.1- 13.2	-	10.05- 13.2	-	3.3A + 3.3A
	10.1- 13.2	-	10.05- 13.2	-	-	20.28- 26.4	-	20.2- 26.4	3.3A + 3.6A
	-	20.28- 26.4	-	20.2- 26.4	-	20.28- 26.4	-	20.2- 26.4	3.6A + 3.6A
Kachasị 33FV	eFlow6NBV				eFlow6NBV				-	16	4.2A	2.5	5A / 250V	10A / 32V	10A / 250V
	10.0- 13.2	-	10.03- 13.2	-	10.0- 13.2	-	10.03- 13.2	-	5.3A + 5.3A
	10.0- 13.2	-	10.03- 13.2	-	-	20.19- 26.4	-	20.19- 26.4	5.3A + 5.6A
	-	20.19- 26.4	-	20.19- 26.4	-	20.19- 26.4	-	20.19- 26.4	5.6A + 5.6A
Kachasị 55FV	eFlow102NBV				eFlow102NBV				-	16	4.2A	2.5	5A / 250V	15A / 32V	10A / 250V
	10.03- 13.2	-	10.03- 13.2	-	10.03- 13.2	-	10.03- 13.2	-	9.3A + 9.3A
Kachasị 75FV	eFlow102NBV				eFlow104NBV				-	16	4.8A	2.5	5A/250V (eFlow102NBV) 6.3A/250V (eFlow104NBV)	15A / 32V	10A / 250V
	10.03- 13.2	-	10.03- 13.2	-	-	20.17- 26.4	-	20.28- 26.4	9.3A + 9.6A
Kachasị 77FV	eFlow104NBV				eFlow104NBV				-	16	5.4A	2.5	6.3A/250V	15A / 32V	10A / 250V
	-	20.17- 26.4	-	20.28- 26.4	-	20.17- 26.4	-	20.28- 26.4	9.6A + 9.6A

Atụmatụ usoro MaximalFV

ACM8 modul njikwa ike ịnweta ike:

Iri na isii (16) na-ebute nsonaazụ a na-achịkwa n'onwe ya. Nhọrọ mmepụta:
a) Iri na isii (16) mpụta ike nzacha nke dara ada.
b) Iri na isii (16) Nwepụta ike nzacha nke ọma.
c) Iri na isii (16) ụdị mpụta relay “C” (pụtara @ 5A/28VDC ma ọ bụ VAC).
d) Ngwakọta ọ bụla nke dị n'elu.
Iri na isii (16) Ntinye njikwa sistemụ na-akpalite ntinye. Nhọrọ ịkpalite ntinye:
a) Iri na isii (16) na-emeghekarị ihe ntinye mkpalite nkụ.
b) Ntinye iri na isii (16) mepere emepe.
c) Ngwakọta ọ bụla nke dị n'elu.

Iri na isii (16) aux agbachabeghị. mmepụta ike (a na-edepụta mmepụta @ 2.5A).
Igwe ọkụ na-acha uhie uhie na bọọdụ ACM8 na-egosi na a na-ebute nsonaazụ nke onye ọ bụla (na-agba ume).

Ịkwụsị Mkpọ oku ọkụ (latching ma ọ bụ enweghị nkwụsị) bụ nke a na-ahọrọ n'otu n'otu maka ihe ọ bụla ma ọ bụ niile nke asatọ (8).
Nhọrọ ntinye ihe mgbanye mgbanyụ ọkụ:
a) Ndenye mkpalite akọrọ na-emepe nke ọma (MENWEE) ma ọ bụ mechiri emechi (NC).
b) Ntinye ngbanwe polarity sitere na sekit mgbama FACP.
Green LED na bọọdụ ACM8 na-egosi nkwụsị FACP kpalitere.

Mgbasa ozi FACP na-egosi na ntinye FACP na-akpalite (ụdị kọntaktị “C” nwere akara @ 1A/28VDC).
EFlow Power Supply/Chaja na-enye ike nkịtị maka bọọdụ ACM8 (wiring ụlọ ọrụ) yana ngwaọrụ njikwa ohere niile ejikọrọ (wiring ubi).

ACM8 isi fuses bụ akara @ 10A. A na-atụle fiusi mmepụta @ 3.5A. Nbunye/Chaja eFlow:
Ntinye: 220VAC 50/60Hz.
Maka mmepụta voltage na ịnye ugbu a na-ezo aka na Chart nhazi usoro MaximalFV, pg. 3.

Enyere nsonye inyeaka @ 1A (anaghị agbanwe agbanwe).
Mfefetage nchedo.
Chaja arụnyere n'ime maka acid a na-emechi ma ọ bụ batrị ụdị batrị.
Ọnụ ego kachasị ugbu a 1.54A.
Gbanwee akpaaka ka batrị nọrọ na-echere mgbe AC dara. Nyefee na ike batrị na-echere bụ ozugbo na enweghị nkwụsị.

Ikwupu mkpu ọkụ ọkụ na-elekọta (latching ma ọ bụ enweghị ike) 10K EOL resistor. Na-arụ ọrụ na ihe mkpalite na-emepe emepe (NO) ma ọ bụ mechiri emechi (NC).
AC dara nlekota (ụdị kọntaktị "C").
Batrị dara na nlekọta ọnụnọ (ụdị kọntaktị "C").
Nkwụsị ike dị ala. Na-emechi ọnụ ụzọ mmepụta DC ma ọ bụrụ na batrị voltage tụlee n'okpuru 71-73% maka 12V nkeji na 70-75% maka 24V nkeji (dabere na ike ọkọnọ). Na-egbochi mmịpụ batrị miri emi.

Maka ọkwa fiusi rụtụ aka na Chart nhazi usoro MaximalFV, pg. 3.
Green AC Power LED na-egosi 220VAC dị ugbu a.
Ntinye AC na ihe ngosi LED nke DC.
Mkpirisi sekit na oke nchebe.
Mkpọchi na-anabata ihe ruru batrị anọ (4) 12VDC/12AH.
Akụkụ mkpuchi (H x W x D): 26" x 19" x 6.25" (660.4mm x 482.6mm x 158.8mm).

Ntuziaka nwụnye MaximalFV

Ụzọ wiwi ga-adị n'ụzọ kwekọrọ na National Electric Code/NFPA 70/ANSI, Canadian Electric Code, Part I, Part II yana koodu mpaghara na ndị ọchịchị niile nwere ikike. Ezubere ngwaahịa maka ime ụlọ
naanị.

Nchọpụta Ọkụ Ọkụ Na-enye Ike LED Diagnostics
Ịnweta ihe nleba anya nke ọkụ ọkụ LED
Ngosipụta njedebe Board Supply Board
Nweta njirimara njedebe onye njikwa ike
Nkọwapụta batrị na-akwado bọọdụ na-eweta ike
Mpụta Board Na-enye Ike Voltage Ntọala
Nweta eserese ngwa ngwa njikwa ike
Eserese FACP/Nhọrọ inye nkonye ike

Wunye unit n'ebe achọrọ. Kaa akara na prerill oghere na mgbidi ka kwụ n'ahịrị n'ahịrị igodo atọ dị n'elu n'ogige ahụ. Wụnye ihe nkwụnye elu atọ na kposara na mgbidi na isi ihe nkedo na-apụta. Tinye oghere igodo elu nke ogige ahụ n'elu skru atọ dị elu, dị larịị na nchekwa. Kaa akara ọnọdụ nke oghere atọ dị ala. Wepu ihe mkpuchi ahụ. Gwuo oghere ndị dị ala ma wụnye ngwa ngwa atọ. Tinye oghere igodo elu nke ogige ahụ n'elu skru atọ dị elu. Wụnye skru atọ dị ala ma jide n'aka na ị ga-eme ka skru niile sie ike ( Akụkụ mkpuchi, pg.).

Jikọọ ike AC akwụghị ụgwọ (220VAC 50/60Hz) na njedebe akara [L, N] (Fig. 3,).
Jiri 14 AWG ma ọ bụ karịa maka njikọ ike niile. Secure green waya ụzọ ụwa n'ala lug.
Debe wiwi nwere oke ike na wiwi na-enweghị oke.
Ekwesịrị ịnye oghere kacha nta 0.25.
kpachara anya: Emetụla akụkụ ọla ndị ekpughere ekpughere aka. Mechie ike sekit alaka ụlọ ọrụ tupu ịwụnye ma ọ bụ na-arụ ọrụ. Enweghị akụkụ ndị ọrụ nwere ike ịrụ ọrụ n'ime. Tụtụ aka na nrụnye na ọrụ nye ndị ọrụ ruru eru.
Họrọ mmepụta DC chọrọ voltage site n'itinye SW1 n'ọnọdụ kwesịrị ekwesị na osisi ọkụ ọkụ (Maximal11FV na Maximal33FV, Fig. 1, pg. 9). Oke ọkụ 55F bụ ụlọ nrụpụta atọrọ na 12VDC. Maximal77F ike ọkọnọ bụ ụlọ ọrụ atọrọ na 24VDC. Maximal75F nwere otu bọọdụ ọkụ na-enye ọkụ nke edobere na 1VDC, yana otu (12) bọọdụ ọkọnọ ike nke edobere na 1VDC.

Tule mmepụta voltage nke unit tupu ijikọ ngwaọrụ ọ bụla iji hụ na arụ ọrụ kwesịrị ekwesị.
Na-ezighi ezi ma ọ bụ elu voltage ga-emebi ngwaọrụ ndị a.
Nhọrọ mmepụta (Fig. 2,):
Ngalaba ahụ ga-enye ma ọ bụ iri na isii (16) mpụta ike gbanwere, iri na isii (16) ụdị akọrọ "C" pụta, ma ọ bụ ihe ọ bụla ngwakọta nke ma gbanwee ike na ụdị "C" pụta.
(a) Mbupute ọkụ agbanwere adịghị mma:
Maka arụmọrụ ọdịda-Safe jikọọ ndenye dị mma (+) nke ngwaọrụ njikwa ohere na njedebe akara
[NC]. Jikọọ ntinye adịghị mma (-) nke ngwaọrụ njikwa ohere na njedebe akara [COM].
(b) Mbupute ọkụ agbanweela nke dara ada:
Maka ọrụ Fail-Secure jikọọ ndenye dị mma (+) nke ngwaọrụ njikwa ohere na njedebe akara [NO]. Jikọọ ntinye adịghị mma (-) nke ngwaọrụ njikwa ohere na njedebe akara [COM].
(c) Mpempe akwụkwọ “C”:
Mgbe a na-achọ ụdị ụdị "C" a ga-ewepụrịrị fuses mmepụta kwekọrọ (1-8) nke bọọdụ ACM8 ọ bụla.

Ihe nrụpụta ike inyeaka ACM8 (anaghị agbanwe agbanwe):
Jikọọ ngwaọrụ njikwa ohere nke chọrọ ike mgbe niile na njedebe akara [C] nti (+) na [COM] adịghị mma (-). Enwere ike iji mmepụta nye ike maka ndị na-agụ kaadị, igodo ahụ wdg. eFlow Auxiliary mmepụta (anaghị agbanwe):
Maka njikọ ngwaọrụ inyeaka agaghị emetụta mmepụta a site na nkwụsị ọkụ dị ala ma ọ bụ mkpu ọkụ
Interface. Jikọọ ngwaọrụ na ọnụ ndị akara [+ AUX -] (Fig. 3,).
Nhọrọ ntinye ntinye (Fig 2):
(a) Na-emepekarị mkpalite ntinye [NO]:
Ntinye 1-8 na-arụ ọrụ site na ntinye sink na-emeghe ma ọ bụ nke mepere emepe. Jikọọ ntinye njikwa njikwa ohere, ahụigodo, bọtịnụ ntinye, REX PIRs, wdg na njedebe akara [IN] na [GND].
(b) Mepee ihe ntinye ihe mkpokọ mkpokọta:
Jikọọ ogwe njikwa ohere mepere onye na-anakọta sink positive (+) na ọdụ akara akara [IN] yana nke ọjọọ (-) na njedebe akara [GND].

Nhọrọ Interface Oti mkpu ACM8 (Fig 5-9):
Ntinye ntinye nke emechiri emechi [NC] ma ọ bụ nke na-emeghe [NO] site na ogwe njikwa ọkụ ma ọ bụ ndenye ngbanwe polarity sitere na sekit mgbama FACP ga-emetụta nsonaazụ ahọpụtara. Iji mee ka Kwụsị FACP maka mmepụta, gbanye mgba ọkụ kwekọrọ na bọọdụ ACM1 ọ bụla. Iji gbanyụọ nkwụsị FACP maka mmepụta, gbanye mgba ọkụ (s) [SW8-SW8] kwekọrọ na bọọdụ ACM1 ọ bụla.
(a) Ntinye [NO] na-emepe nke ọma:
Maka nko-elu na-enweghị njide rụtụ aka na Fig. 6,. Maka njigide nko-elu na-ezo aka na Fig. 7,.
(b) Ntinye [NC] na-emechikarị:
N'ihi na-abụghị latching nko-elu na-ezo aka fig. 8. N'ihi na latching nko-elu na-ezo aka fig. 9,.
(c) FACP mgbama mgbanye mgbanye mgbanye sekit:
Jikọọ ihe dị mma (+) na nke na-adịghị mma (-) site na mmepụta sekit mgbama FACP na njedebe akara [+ INP -]. Jikọọ FACP EOL na njedebe akara [+ RET -] (a na-ezo aka na polarity na ọnọdụ mkpu). Jumper dị n'akụkụ TRG LED ga-ebipụ (Fig 6).
Ụdị FACP akọrọ "C" mmepụta (UL anaghị enyocha ya) (Fig 2a):
FACP ụdị "C" nwere ike iji kpalite mkpesa ma ọ bụ ngwaọrụ mgbaàmà. Kọntaktị ndị a na-agbanye n'elu ntinye oti mkpu ọkụ na-akpalite na bọọdụ ACM8.

Njikọ batrị guzoro ọtọ (Fig 3):
Maka ngwa njikwa nnweta batrị bụ nhọrọ. Mgbe ejighị batrị, mfu nke AC ga-ebute mfu nke mmepụta voltage. Mgbe achọrọ iji batrị na-echere, ha ga-abụrịrị acid acid ma ọ bụ gel ụdị.
Jikọọ batrị na njedebe akara [- BAT +] (Fig 3, pg. 10). Jiri batrị abụọ (2) 12VDC ejikọrọ n'usoro maka ọrụ 24VDC (edu batrị gụnyere). Jiri batrị - Casil CL1270 (12V/7AH), CL12120
(12V / 12AH), CL12400 (12V / 40AH), CL12650 (12V / 65AH) batrị ma ọ bụ UL ghọtara batrị BAZR2 na BAZR8 nke ọkwa kwesịrị ekwesị.
Ihe nrụpụta batrị na AC (Fig 3):
Ọ chọrọ ijikọ ngwaọrụ mkpesa nsogbu nlekọta na nsonaazụ akara [AC Fail, BAT Fail] akara nrụnye nlegharị anya [NC, C, NO] na ngwaọrụ ngosi ngosi kwesịrị ekwesị.
Jiri 22 AWG ruo 18 AWG maka ọdịda AC yana obere mkpesa batrị.
Iji gbuo oge mkpesa AC maka awa 2., tọọ mgba ọkụ dip [AC Delay] ka ọ bụrụ ọnọdụ gbanyụọ (Fig 3).
Iji gbuo oge mkpesa AC maka 1 min., tọọ mgba ọkụ dip [AC Delay] ka ọ bụrụ ọnọdụ ON (Fig 3).
Kwụpụ oti mkpu ọkụ (Fig 3):
Iji mee ka Mwapu Mkpu ọkụ tọọ ngbanwe ngbanwe [Mmechi] gaa n'ọnọdụ NA.
Iji gbanyụọ mkpu oku Kwupu;
Ntinye nke tamper mgba ọkụ (anaghị etinye ya) (Fig. 3b):
Ugwu UL Edepụtara tamper mgba ọkụ (Honeywell Model 112 ma ọ bụ dakọtara) n'elu nke ogige. Gbanye tamper mgbanwo akara n'elu nsọtụ nke ogige ahụ dị ka 2" site n'akụkụ aka nri (Fig 3b).
Jikọọ tampgbanwee wiring gaa na ntinye njikwa njikwa ma ọ bụ mkpesa UL Edepụtara kwesịrị ekwesị
ngwaọrụ. Iji mee ka mgbaama mkpu rụọ ọrụ, mepee ọnụ ụzọ nke ogige ahụ.
Ọtụtụ ntinye ọkụ ọkụ (Fig. 2):
Mgbe ị na-eji ike mpụga ọzọ, jumpers J1 na J2 dị na bọọdụ ACM8 kwekọrọ ga-egbutu (Fig 2c, 2d, na Fig. 5). Jikọọ ọkụ njikwa nnweta mpụga na ọdụ akara akara [- Control +] (Nkwụsị ndị a na-adakọ na ọdụ [- Power +]). Mgbe ị na-eji akụrụngwa ọkụ DC, a ga-ahụrịrị polarity. Mgbe ị na-eji ọkụ ọkụ AC, ọ dịghị mkpa ka a hụ polarity (Fig 2d, pg. 9). A ga-emerịrị njikọ wiring ubi niile na-eji waya CM ma ọ bụ FPL nwere jaket dabara adaba (ma ọ bụ ihe dochie ya) (Fig 4a).

Nlekọta

A ga-anwale nkeji opekata mpe otu ugboro n'afọ maka ịrụ ọrụ kwesịrị ekwesị dịka ndị a:

Nlekọta FACP: Iji hụ na njikọ kwesịrị ekwesị na ịrụ ọrụ nke nkwụnye nkwụnye ọkụ ọkụ. Biko soro usoro kwesịrị ekwesị n'okpuru:

Ntinye na-emepe emepe: Ịtụnye obere oge n'etiti ọnụ ụzọ akara [T] na [+ INP] ga-akpalite nkwụsị ọkụ ọkụ. Wepu mkpụmkpụ ka ịtọgharịa.

Ntinye na-emechikarị: Iwepu waya site na ọdụ akara akara [INP –] ga-akpalite nkwupu mkpu ọkụ. Dochie waya ka ọ bụrụ akara akara [INP –] ka ịtọgharịa.
Ntinye sekit mgbama FACP: Ọ dị mkpa ịkpalite Sistemụ Mkpu ọkụ. N'ọnọdụ ndị a niile, TRG LED nke ACM8 ga-enwu. Nsonaazụ niile ahọpụtara maka Mgbasa Mkpu Mkpuchi Ọkụ ga-eme ka ewepụtara ngwaọrụ mkpọchi.

Mara: Mpụta niile [OUT 1] - [OUT 8] ga-abụrịrị n'ọnọdụ nkịtị (de-ike) tupu anwale. Mgbe a na-ahazi unit ahụ maka Mepee Nkịtị (Fig 8) ma ọ bụ na-emechi emechi (Fig 10) arụ ọrụ latching, ọ dị mkpa iji tọgharịa Mkpuchi Mkpuchi Ọkụ site n'ịgbalite Nrụgharị Nrụgharị emechikarị.

Mmepụta Voltage nwale: N'okpuru ọnọdụ ibu nkịtị, mmepụta DC voltage kwesịrị ịlele nke ọma voltage larịị (tụ aka na MaximalF usoro nhazi Chart).

Nnwale batrị: N'okpuru ọnọdụ ibu nkịtị lelee na chajịrị batrị zuru oke, lelee voltaji akọwapụtaratage na ọdụ batrị yana na bọọdụ akara akara [+ BAT -] iji hụ na enweghị nkwụsịtụ na wires njikọ batrị.
Mara: Ọnụ ego kachasị ugbu a bụ 1.54A. Ndụ batrị tụrụ anya bụ afọ 5; Otú ọ dị, a na-atụ aro ka ịgbanwe batrị n'ime afọ 4 ma ọ bụ obere ma ọ bụrụ na ọ dị mkpa.

Nchọpụta Ọkụ Ọkụ Na-eweta Ike LED Diagnostics:

Uhie (DC)	Green (AC/AC1)	Ọkwa inye ike
ON	ON	Ọnọdụ ọrụ nkịtị.
ON	Gbanyụọ	Mfu nke AC. Ike inye batrị guzoro ọtọ.
Gbanyụọ	ON	Enweghị mmepụta DC.
Gbanyụọ	Gbanyụọ	Mfu nke AC. Achụpụrụ ma ọ bụ enweghị batrị na-echere. Enweghị mmepụta DC.

Uhie (Bat)	Ọnọdụ batrị
ON	Ọnọdụ ọrụ nkịtị.
Gbanyụọ	Batrị ada ada/obere batrị.

Nchọpụta Ọkụkụ nke Onye njikwa ike nweta:

Ikanam	ON	Gbanyụọ
LED 1-Ikanam 8 (Uhie)	Mbupute relay (s) na-enye ike.	Mgbasa ozi (s) arụpụtaghị ike.
Trg (Green)	Ntinye FACP kpalitere (ọnọdụ mkpu).	FACP nkịtị (ọnọdụ enweghị mkpu).

Nkọwapụta batrị na bọọdụ na-eweta ike:

Batrị	Kachasị 11F	Kachasị 33F	Maximal55F, Maximal75F, na Maximal77F
7 AH	Nkeji 30/4A	Nkeji 10/6A	Nkeji 5/10A
12 AH	Nkeji 35/4A	Nkeji 30/6A	Nkeji 30/10A
40 AH	Ihe karịrị awa 4 / 4A	Ihe karịrị awa 4 / 6A	Ihe karịrị awa 2 / 10A
65 AH	Ihe karịrị awa 4 / 4A	Ihe karịrị awa 4 / 6A	Ihe karịrị awa 4 / 10A

Ngosipụta ngwụcha Board Supply Power:

Akụkọ Mgbe Ebighị Ebi	Ọrụ/Nkọwa
L, G, N	Jikọọ 220VAC 50/60Hz na njedebe ndị a: L na-ekpo ọkụ, N na-anọpụ iche. Ejila ọnụ akara [G].
+ DC -	Ụlọ ọrụ ejikọrọ na bọọdụ ACM8.
A na-ahụ maka mkpali EOL	Ọkụ mkpu Interface na-akpalite ntinye site na mkpụmkpụ ma ọ bụ FACP. Ntinye ntinye nwere ike imeghe nke ọma, na-emechikarị ya site na sekit mmepụta FACP (ntinye nwere oke ike) (Fig 3, pg. 10).
Mba, Ntọgharịa GND	FACP interface latching ma ọ bụ enweghị ike (ike nwere oke) (Fig 3, pg. 10).
+ AUX –	Ntinye aka nwere oke inye aka nyere @ 1A (anaghị agbanwe agbanwe) (Fig 3, pg. 10).
AC FAIL NC, C, NO	Na-egosi mfu nke ike AC, dịka ọmụmaatụ jikọọ na ngwaọrụ a na-anụ ma ọ bụ ogwe mkpu. Relay na-enwekarị ike mgbe ike AC dị. Ogo kọntaktị 1A @ 30VDC (nwere oke ike) (Fig 3, pg. 10).
BAT FAIL NC, C, NO	Na-egosi ọnọdụ batrị dị ala, dịka ọmụmaatụ jikọọ na panel mkpu. Relay na-enwekarị ike mgbe ike DC dị. Ogo kọntaktị 1A @ 30VDC. A na-akọ batrị ewepụrụ n'ime nkeji ise. A na-akọ njikọghachi batrị n'ime nkeji 1 (nwere oke ike) (Fig. 3, pg. 10).
+ BAT -	Njikọ batrị kwụrụ ọtọ. Ọnụ ego kacha dị ugbu a 1.54A (enweghị oke ike) (Fig. 3, pg. 10).

Nweta njirimara njedebe onye njikwa ike:

Akụkọ Mgbe Ebighị Ebi	Ọrụ/Nkọwa
– Ike +	12VDC ma ọ bụ 24VDC si ike ọkọnọ / chaja (ụlọ ọrụ ejikọrọ). Ọnụ ọnụ ndị a na-ejikọta na njedebe [- Control +].
– Njikwa +	Ọnụ ọnụ ndị a na-ejikọta ọnụ na ọdụ [- Power +]. Enwere ike ijikọ ọnụ ọnụ ndị a na ọkụ ọkụ njikwa ohere nwere oke ike edepụtara na mpụga iji nye ike ọrụ dịpụrụ adịpụ maka ngwaọrụ (UL anaghị enyocha ya). A ga-ewepụrịrị jumpers J1 na J2.
NDỊ MMADỤ 1- NTỤTA 8 IN, GND	Site na ntinye na-emepe emepe na/ma ọ bụ meghere ihe ntinye ihe na-emepe onye na-anakọta ihe (rịọ ka ịpụ bọtịnụ, ọpụpụ pir, wdg)
Mpụta 1- Mbupute 8 NC, C, NO, COM	12VDC ruo 24VDC na-akpalite nsonaazụ a na-achịkwa. Ibu kacha kwa mmepụta bụ 2.5A.
	Maximal11FV: P/S 1 – 10.1-13.2VDC @ 3.3AP/S 2 – 10.1-13.2VDC @ 3.3A ma ọ bụ P/S 1 – 20.28-26.4VDC @ 3.6AP/S 2 – 20.28-ma ọ bụ @ 26.4VDC P/S 3.6 – 1-10.1VDC @ 13.2A na P/S 3.3 – 2-20.28VDC @ 26.4A.
	Maximal33FV: P/S 1 – 10.0-13.2VDC @ 5.3AP/S 2 – 10.0-13.2VDC @ 5.3A ma ọ bụ P/S 1 – 20.28-26.4VDC @ 5.6AP/S 2 – 20.28-ma ọ bụ @ 26.4VDC P/S 5.6 – 1-10.0VDC @ 13.2A na P/S 5.3 – 2-20.28VDC @ 26.4A.
	Maximal55FV: P/S 1 – 10.03-13.2VDC @ 9.3A na P/S 2 – 10.03-13.2VDC @ 9.3A.
	Maximal75FV: P/S 1 – 10.03-13.2VDC @ 9.3A na P/S 2 – 20.17-26.4VDC @ 9.6A.
	Maximal77FV: P/S 1 – 20.17-26.4VDC @ 9.6A na P/S 2 – 20.17-26.4VDC @ 9.6A.
	Ọdịda-Safe [NC positive (+) & COM Negative (-)], Fail-Secure [NO positive (+) & COM Negative (-)], mmepụta ihe enyemaka [C nti (+) & COM Negative (-)] ( Mgbe ị na-eji AC ike ọkọnọ polarity ekwesịghị ịhụ), NC, C, NO tọghatara akọrọ ụdị "C" 5A 24VAC/VDC gosiri akọrọ mmepụta mgbe fuses na-ewepụ. Egosiri kọntaktị na steeti anaghị akpalite.
FACP INTERFACE T, + INPUT –	Ọkụ mkpu Interface na-akpalite ntinye sitere na FACP. Ntinye ntinye nwere ike imeghe nke ọma, na-emechikarị ya site na mmepụta sekit mgbama FACP (Fig. 5-9, pg. 12).
FACP INTERFACE NC, C, NO	Ụdị kọntaktị relay “C” nwere akara @ 1A 28VDC maka mkpesa mkpu (UL anaghị enyocha ya).

Mpụta Board Na-enye Ike Voltage Ntọala:

Nweta eserese ngwa ngwa njikwa ike (maka ACM8 ọ bụla):

Fig. 3 - Usoro FV kachasị

kpachara anya: Mgbe edobere bọọdụ ọkọnọ ike maka 12VDC jiri naanị otu (1) 12VDC nọrọ na batrị.
Debe wiwi nwere oke ike na enweghị oke.
Jiri ohere kacha nta 0.25 inch.
Batrị 12AH nwere ike ịgbanye bụ batrị kacha ibu nwere ike dabara na ogige a. Ekwesịrị iji mkpuchi batrị mpụga UL edepụtara ma ọ bụrụ na ị na-eji batrị 40AH ma ọ bụ 65AH.

Achọrọ Wiring nwere oke ike NEC:
Wiwi sekit nwere oke na enweghị ike ga-anọrịrị iche na kọbọd. Waịkọ sekit niile nwere oke ike ga-adịrịrị opekata mpe 0.25” pụọ na wiwi sekit ọ bụla na-enweghị oke. Ọzọkwa, eriri sekit niile nwere oke ike na eriri sekit na-enweghị ike ga-abanye ma pụọ na kabinet site na ụzọ dị iche iche.
Otu dị otú ahụ exampE gosipụtara nke a n'okpuru. Ngwa gị akọwapụtara nwere ike ịchọ ka a ga-eji mkpọpu ikuku dị iche iche. Enwere ike iji ọkpọ ọkpọ ọ bụla mee ihe. Maka ngwa nwere oke ike iji conduit bụ nhọrọ. A ga-emerịrị njikọ wiwi ubi niile na-eji waya CM ma ọ bụ FPL nwere jaket dabara adaba (ma ọ bụ ihe dochie ya).
Nhọrọ UL Edepụtara batrị ga-agbanyerịrị n'akụkụ ọkụ ọkụ site na usoro wiring Class 1.
Maka nrụnye Canada na-eji wiwi mkpuchi mkpuchi maka njikọ niile.
Mara: Rụtụ aka na eserese njikwa waya dị n'okpuru maka ụzọ kwesịrị ekwesị isi wụnye waya CM ma ọ bụ FPL nwere jaketị (Fig 4a).

Eserese FACP nko-elu

Ihe osise 5 Mkpịsị aka nhọrọ site na iji ntinye ọkụ abụọ (2) dịpụrụ adịpụ (naanị ọdabara na Maximal11F, UL anaghị enyocha ya):

Ihe osise 6 Ntinye ngbanwe polarity sitere na mmepụta sekit mgbama FACP (a na-ezo aka na polarity na ọnọdụ mkpu):

Ihe osise 7 Na-emepe emepe: Ntinye mkpalite FACP anaghị ejide ya:

Ihe osise 8 Mepee ngwa ntinye FACP Latching na iji ntọgharị:

Ihe osise 9 Emechiri nke ọma: Ntinye mkpalite FACP anaghị ejide ya:

Ihe osise 10 Emechiri nke ọma: Njide ntinye mkpalite FACP yana nrụpụta:

Akụkụ Mkpuchi (H x W x D ihe ruru):
26" x 19" x 6.25" (660.4mm x 482.6mm x 158.8mm)

Enwere ike ijikwa ma nyochaa ike na-ebunye / chaja eFlow ka ị na-akọpụta ike / nchọpụta sitere na ebe ọ bụla karịa netwọkụ…

LINQ2 - Module Nkwukọrịta netwọkụ
LINQ2 na-enye ohere IP dịpụrụ adịpụ ịnweta data ozugbo sitere na eFlow ike ọkọnọ/ chaja iji nyere aka mee ka sistemụ na-arụ ọrụ na ọkwa kacha mma. Ọ na-eme ka nrụnye ngwa ngwa ma dị mfe na nhazi, na-ebelata oge nkwụsị nke usoro, ma wepụ oku ọrụ na-adịghị mkpa, nke na-enyere aka belata mkpokọta ọnụ ahịa nke nwe (TCO) - yana ịmepụta isi iyi ọhụrụ nke Recurring Monthly Revenue (RMR).

Atụmatụ:

Edepụtara UL na US na Canada.
Njikwa mpaghara ma ọ bụ nke dịpụrụ adịpụ ruo (2) mmepụta ike Altronix eFlow abụọ site na LAN na/ma ọ bụ WAN.

Nyochaa nchọpụta oge n'ezie: mmepụta DC voltage, mmepụta ugbu a, AC & batrị ọnọdụ/ọrụ, ntinye ihe na-akpalite mgbanwe steeti, mgbanwe ọnọdụ mmepụta na otu okpomọkụ.
Njikwa ohere na njikwa onye ọrụ: Machibido ịgụ/dee, machibido ndị ọrụ ka ha nweta akụrụngwa akọwapụtara
Ụdị netwọọkụ abụọ (2) na-achịkwa Ụdị "C" Relays.
Ihe ntinye atọ (3) nwere ike ime mmemme: njikwa relays na ike ọkụ site na isi mmalite ngwaike mpụga.

Ozi email na Windows Dashboard
ndekọ ihe omume na-edekọ akụkọ ihe mere eme.
Secure Socket Layer (SSL).
Enwere ike ime ya site na USB ma ọ bụ web ihe nchọgharị – gụnyere ngwanrọ na-arụ ọrụ na eriri USB ft. 6.

LINQ2 na-agbago n'ime ogige MaximalF ọ bụla

Altronix abụghị maka mmejọ ederede ọ bụla.
140 58th Street, Brooklyn, New York 11220 USA | ekwentị: 718-567-8181 | faksị: 718-567-9056
websaịtị: www.altronix.com
ozi-e: info@altronix.com
Akwụkwọ ikike ndụ
IIMaximal11FV/33FV/55FV/75FV/77FV Series H11U

Maximal11VF/33FV/55FV/75FV/77V Usoro nnweta ike njikwa (Fused) Ntuziaka ntinye

Akwụkwọ / akụrụngwa

Altronix Maximal11FV Kachasị FV Series Enwere ike ịnweta ike njikwa ike [pdf] Ntuziaka nwụnye
Maximal11FV, Maximal55FV, Maximal11FV Maximal FV Series Dual Power Supply Access Controllers Power, Maximal11FV, Maximal FV Series Dual Power Supply Access Power Controllers, Access Controllers, Power Controllers, Controllers

Ntụaka

Akwụkwọ ntuziaka onye ọrụ

Altronix Maximal11FV Kachasị FV Series Enwere ike ịnweta ike njikwa ike

Usoro MaximalFV gafereview