Altronix Maximal FD Series Dual Power Supply Nweta ntuziaka nwụnye njikwa ike

Oke 11FD
- Ike 1: 12VDC @ 3.3A ma ọ bụ 24VDC @ 3.6A.
- Ike 2: 12VDC @ 3.3A ma ọ bụ 24VDC @ 3.6A.
– Iri na isii (16) PTC echekwabara ikike nwere oke.
Oke 33FD
- Ike 1: 12VDC @ 5.3A ma ọ bụ 24VDC @ 5.6A.
- Ike 2: 12VDC @ 5.3A ma ọ bụ 24VDC @ 5.6A.
– Iri na isii (16) PTC echekwabara ikike nwere oke.
Oke 55FD
- Ike 1: 12VDC @ 9.3A.
- Ike 2: 12VDC @ 9.3A.
– Iri na isii (16) PTC echekwabara ikike nwere oke.
Oke 75FD
- Ike 1: 12VDC @ 9.3A.
- Ike 2: 24VDC @ 9.6A.
– Iri na isii (16) PTC echekwabara ikike nwere oke.
Oke 77FD
- Ike 1: 24VDC @ 9.6A.
- Ike 2: 24VDC @ 9.6A.
– Iri na isii (16) PTC echekwabara ikike nwere oke.

Ntuziaka nwụnye
Mkpu MDFD052419
Ụlọ ọrụ wụnye: _______________ Onye nnọchite anya ọrụ: __________________
Adreesị: __________________________ Ekwentị #: __________________

MaximalFD Series gafereview:

Ndị na-ahụ maka ohere ịnweta MaximalFD na-ekesa ma gbanwee ike iji nweta sistemụ njikwa na ngwa. Ha na-atụgharị ntinye 120VAC 60Hz ka ọ bụrụ iri na isii (16) 12VDC ma ọ bụ 24VDC PTC na-achịkwa onwe ya.
A na-arụ ọrụ mmepụta site na sink onye na-anakọta oghe ma ọ bụ na-emepekarị (NO) ntinye mkpata akọrọ sitere na Sistemụ Njikwa Nweta, Kaadị Reader, Keypad, Button Push, PIR, wdg. nkeji ga-ebufe ike gaa na ngwaọrụ ngwaike njikwa dị iche iche gụnyere Mag Locks. , Electric Strikes, Magnetic Door Holders, wdg. Mpụta ga-arụ ọrụ na ma ọdịda-Safe na/ ma ọ bụ ọdịda-Secure ụdịdị. Interface FACP na-enyere mgbapụ ihe mberede, na nlekota mkpu, ma ọ bụ enwere ike iji kpalite ngwaọrụ inyeaka ndị ọzọ. A na-ahọrọ njirimara nkwụsị ọkụ ọkụ n'otu n'otu maka ihe ọ bụla ma ọ bụ niile nke asatọ (8).

Chart nhazi usoro MaximalFD:

Ndepụta ụlọ ọrụ:

Ndepụta UL maka
Nrụnye US: UL 294* - UL Edepụtara maka nkeji sistemụ njikwa ohere.
*ANSI/UL 294 7th Ed. Nweta ọkwa arụmọrụ njikwa:
Mwakpo mbibi – I; Ntachi obi - I; Nchekwa ahịrị - I; Njikere site na ike – II, III, IV.

Ndepụta UL maka
Nrụnye Canada: ULC-S319-05 – Ngwa klaasị nke sistemu nnweta eletrọnịkị.
CSA C22.2 No.205 - Ngwa mgbaama.
ULC-S319-05 Sistemụ njikwa nnweta eletrọnịkị ga-emebi site na iji mgbakwunye, mgbasawanye, ebe nchekwa, ma ọ bụ modul ọzọ nke onye nrụpụta ma ọ bụ ndị nrụpụta ndị ọzọ rụpụtara.

Atụmatụ usoro MaximalFD:

ACM8CB modul njikwa ike ịnweta ike:

Iri na isii (16) na-ebute nsonaazụ a na-achịkwa n'onwe ya. Nhọrọ mmepụta:
a) Iri na isii (16) mpụta ike nzacha nke dara ada.
b) Iri na isii (16) Nwepụta ike nzacha nke ọma.
c) Ngwakọta ọ bụla nke dị n'elu.

Iri na isii (16) Ntinye njikwa sistemụ na-akpalite ntinye. Nhọrọ ịkpalite ntinye:
a) Iri na isii (16) na-emeghekarị (MHỤKWU) ntinye mkpali akọrọ.
b) Ntinye iri na isii (16) ghe oghe.
c) Ngwakọta ọ bụla nke dị n'elu.
Iri na isii (16) aux agbachabeghị. mmepụta ike (a na-edepụta mmepụta @ 2.5A).

Igwe ọkụ na-acha uhie uhie na bọọdụ ACM8CB na-egosi na a na-ebute nsonaazụ nke onye ọ bụla (gbanye ọkụ).
Mwepu mkpu oku ọkụ (latching ma ọ bụ enweghị nkwụsị) bụ nke a na-ahọrọ n'otu n'otu maka ihe ọ bụla ma ọ bụ niile nke iri na isii (16).
Nhọrọ ntinye ihe mgbanye mgbanyụ ọkụ:
a) Ndenye mkpalite akọrọ na-emepe nke ọma (MENWEE) ma ọ bụ mechiri emechi (NC).
b) Ntinye ngbanwe polarity sitere na sekit mgbama FACP.

Green LED na bọọdụ ACM8CB na-egosi na agbanyere FACP.
Mgbasa ozi FACP na-egosi na ntinye FACP na-akpalite (ụdị kọntaktị "C" nke akara @ 1A/28VDC UL anaghị enyocha ya).

EFlow Power Supply/Chaja na-enye ike nkịtị maka bọọdụ ACM8CB (wiring ụlọ ọrụ) yana ngwaọrụ njikwa ohere niile ejikọrọ (wiring ubi).
ACM8CB bọọdụ isi fuses ka akara @ 10A. A na-edepụta PTCs @ 2.5A.

Nbunye/ịchaja eFlow:

Ntinye: 120VAC, 60Hz.
Maka mmepụta voltage na inye ugbu a na-ezo aka na MaximalFD usoro nhazi Chart, pg. 3.
Klas inyeaka 2 Mmepụta nwere oke ike nwere ọkwa @ 1A (anaghị agbanwe agbanwe).
Mfefetage nchedo.
Chaja arụnyere maka batrị lead acid ma ọ bụ ụdị gel nwere akara.
Ọnụ ego kachasị ugbu a 1.54A.
Gbanwee akpaaka ka batrị nọrọ na-echere mgbe AC dara. Nyefee na ike batrị na-echere bụ ozugbo na enweghị nkwụsị.

Ikwupu mkpu ọkụ ọkụ na-elekọta (latching ma ọ bụ enweghị ike) 10K EOL resistor. Na-arụ ọrụ na ihe mkpalite na-emepe emepe (NO) ma ọ bụ mechiri emechi (NC).
AC adaghị nlekọta (ụdị kọntaktị “C”).
Batrị dara na nlekọta ọnụnọ (ụdị kọntaktị "C").
Nkwụsị ike dị ala. Na-emechi ọnụ ụzọ mmepụta DC ma ọ bụrụ na batrị voltage tụlee n'okpuru 71-73% maka 12V nkeji na 70-75% maka 24V nkeji (dabere na ike ọkọnọ). Na-egbochi mmịpụ batrị miri emi.

Maka fuse, ọkwa na-ezo aka na Chart nhazi usoro MaximalFD, pg. 3.
Green AC Power LED na-egosi 120VAC dị ugbu a.
Ntinye AC na ihe ngosi LED nke DC.
Mkpirisi sekit na oke nchebe.
Ihe mkpuchi ahụ na-anabata ihe ruru batrị anọ (4) 12VDC/12AH.
Akụkụ mkpuchi (H x W x D): 26" x 19" x 6.25" (660.4mm x 482.6mm x 158.8mm).

Ntuziaka nwụnye MaximalFD:

Ụzọ wiwi ga-adị n'ụzọ kwekọrọ na National Electric Code/NFPA 70/ANSI, Canadian Electric Code, Part I, Part II, yana koodu mpaghara na ndị ọchịchị niile nwere ikike. Ezubere ngwaahịa a maka naanị ime ụlọ.

Nchọpụta Ọkụ Ọkụ Na-enye Ike LED Diagnostics	(pg. 7)
Ịnweta ihe nleba anya nke ọkụ ọkụ LED	(pg. 7)
Nkọwapụta batrị na-akwado bọọdụ na-eweta ike	(pg. 7)
Ngosipụta njedebe Board Supply Board	(pg. 8)
Nweta njirimara njedebe onye njikwa ike	(pg. 8)
Mpụta Board Na-enye Ike Voltage Ntọala	(pg. 9)
Nweta eserese ngwa ngwa njikwa ike	(pg. 9)
Eserese FACP/Nhọrọ inye nkonye ike	(pg. 12)

Wụnye otu n'ime ebe achọrọ. Kaa akara na prerill oghere na mgbidi ka kwụ n'ahịrị n'ahịrị igodo atọ dị n'elu n'ogige ahụ. Wụnye ihe nkwụnye elu atọ na kposara na mgbidi na isi ihe nkedo na-apụta. Tinye oghere igodo elu nke ogige ahụ n'elu skru atọ dị elu, ọkwa, na nchekwa. Kaa akara ọnọdụ nke oghere atọ dị ala. Wepu ihe mkpuchi ahụ. Gwuo oghere ndị dị ala ma wụnye ngwa ngwa atọ. Tinye oghere igodo elu nke ogige ahụ n'elu skru atọ dị elu. Wụnye skru atọ dị ala ma jide n'aka na ị ga-eme ka skru niile sie ike (Mpaghara mkpuchi, pg. 15).

Jikọọ ike AC akwụghị ụgwọ (120VAC 60Hz) na njedebe akara [L, N] (Fig 3, pg. 10). Green “AC” LED na bọọdụ ọkọnọ ike ga-agbanye. Enwere ike ịhụ ọkụ a site na oghere LED na ọnụ ụzọ nke ogige ahụ. Jiri 14 AWG ma ọ bụ karịa maka njikọ ike niile. Ekwentị akwụkwọ ndụ akwụkwọ ndụ waya na-eduga n'ala ala.
Debe wiwi nwere oke ike na wiwi enweghị oke. Opekempe 0.25" oghere ga-enyerịrị (Fig 3, pg. 10).
kpachara anya: Emetụla akụkụ ọla ndị ekpughere ekpughere aka. Mechie ike sekit alaka ụlọ ọrụ tupu ịwụnye ma ọ bụ na-arụ ọrụ. Enweghị akụkụ ndị ọrụ ga-arụ ọrụ n'ime.
Tụtụ aka na nrụnye na ọrụ nye ndị ọrụ ruru eru.
Họrọ mmepụta DC chọrọ voltage site n'itinye SW1 n'ọnọdụ kwesịrị ekwesị na osisi ọkụ ọkụ (Maximal11FD na Maximal33FD), (Fig 1, pg. 9). Maximal55FD ike ọkọnọ bụ ụlọ ọrụ atọrọ na 12VDC. Maximal77FD ike ọkọnọ bụ ụlọ ọrụ atọrọ na 24VDC. Maximal75FD nwere otu bọọdụ ọkụ na-enye ọkụ nke edobere na 1VDC, yana otu (12) bọọdụ ọkọnọ ọkụ nke edobere na 1VDC.

Tule mmepụta voltage nke unit tupu ijikọ ngwaọrụ ọ bụla iji hụ na arụ ọrụ kwesịrị ekwesị. Na-ezighi ezi ma ọ bụ elu voltage ga-emebi ngwaọrụ ndị a.
Nhọrọ mmepụta (Fig. 2, pg. 9):
Ngalaba ahụ ga-enye ma ọ bụ iri na isii (16) mpụta ike gbanwere, iri na isii (16) ụdị akọrọ "C" pụta, ma ọ bụ ihe ọ bụla ngwakọta nke ma gbanwee ike na ụdị "C" pụta.
(a) Mwepụta ike gbanwere nke ọdịda-Enweghị Nchekwa: Maka ịrụ ọrụ nchekwa adịghị ike jikọọ ntinye dị mma (+) nke ngwaọrụ njikwa ohere na ọdụ akara akara.
[NC]. Jikọọ ntinye na-adịghị mma (-) nke ngwaọrụ njikwa ohere na njedebe akara [COM].
(b) Mbupute ọkụ agbanweela nke dara ada:
Maka ọrụ Fail-Secure jikọọ ndenye dị mma (+) nke ngwaọrụ njikwa ohere na ọdụ akara akara [NO]. Jikọọ ntinye na-adịghị mma (-) nke ngwaọrụ njikwa ohere na njedebe akara [COM].

Ihe nrụpụta ike inyeaka ACM8CB (anaghị agbanwe agbanwe):
Jikọọ ngwaọrụ njikwa ohere nke chọrọ ike mgbe niile na njedebe akara [C] nti (+) na [COM] adịghị mma (-).
Nsonaazụ inyeaka eFlow (anaghị agbanwe):
Maka njikọ ngwaọrụ inyeaka, nkwụpụ ike dị ala agaghị emetụta mmepụta a ma ọ bụ Interface Oti mkpu. Jikọọ ngwaọrụ na njedebe akara [+ AUX -] (Fig. 3, pg. 10).
Nhọrọ ntinye ntinye (Fig. 2, pg. 9):
(a) Na-emepekarị mkpalite ntinye [NO]:
Ntinye 1-8 na-arụ ọrụ site na ntinye sink na-emeghe ma ọ bụ nke mepere emepe. Jikọọ ntinye njikwa njikwa ohere, ahụigodo, bọtịnụ ntinye, REX PIRs, wdg na njedebe akara [IN] na [GND].
(b) Mepee ihe ntinye ihe mkpokọ mkpokọta:
Jikọọ ogwe njikwa ohere mepere onye na-anakọta sink positive (+) na ọdụ akara akara [IN] yana nke ọjọọ (-) na njedebe akara [GND].

Nhọrọ Interface Oti mkpu ACM8CB (Figs. 5-9, pg. 12):
Ntinye ntinye nke emechiri emechi [NC] ma ọ bụ nke na-emeghe [NO] site na ogwe njikwa ọkụ ma ọ bụ ndenye ngbanwe polarity sitere na sekit mgbama FACP ga-emetụta nsonaazụ ahọpụtara. Iji mee ka FACP kwupu maka mmepụta, gbanye mgba ọkụ kwekọrọ na bọọdụ ACM1CB ọ bụla. Iji gbanyụọ nkwụsị FACP maka mmepụta, gbanye mgba ọkụ kwekọrọ na bọọdụ ACM8CB ọ bụla.
(a) Ntinye [NO] na-emepe nke ọma:
Maka nko-elu na-adịghị ejigide na-ezo aka na Fig. 6, pg. 12. N'ihi na latching nko-elu na-ezo aka na fig. 7, pg. 12.
(b) Ntinye [NC] na-emechikarị:
Maka nko-elu na-adịghị ejigide na-ezo aka na Fig. 8, pg. 12. N'ihi na latching nko-elu na-ezo aka na fig. 9, pg. 12.
(c) FACP mgbama mgbanye mgbanye mgbanye sekit:
Jikọọ ihe dị mma (+) na nke na-adịghị mma (-) site na mmepụta sekit mgbama FACP na njedebe akara [+ INP -]. Jikọọ FACP EOL na njedebe akara [+ RET -] (a na-ezo aka na polarity na ọnọdụ mkpu). A ghaghị ịkpụcha jumper dị n'akụkụ TRG LED (Fig 2a, pg. 9 na Fig. 6, pg. 12).
Ụdị akọrọ FACP “C” mmepụta (UL anaghị enyocha ya) (Fig. 2b, pg. 9):
FACP ụdị "C" nwere ike iji kpalite mkpesa ma ọ bụ ngwaọrụ mgbaàmà. Kọntaktsị ndị a na-agbanye na ntinye oti mkpu ọkụ na bọọdụ ACM8CB.

Njikọ batrị guzoro n'akụkụ (Fig. 3, pg. 10):
Maka ngwa njikwa nnweta US batrị bụ nhọrọ. Achọrọ batrị maka nrụnye Canada (ULC-S319). Mgbe ejighị batrị, mfu nke AC ga-ebute mfu nke mmepụta voltage. Mgbe achọrọ iji batrị na-echere, ha ga-abụrịrị acid acid ma ọ bụ gel ụdị. Jikọọ batrị na njedebe akara [- BAT +] (Fig 3, pg. 10). Jiri batrị abụọ (2) 12VDC ejikọrọ n'usoro maka ọrụ 24VDC (edu batrị gụnyere). Jiri batrị - Castle CL1270 (12V / 7AH), CL12120 (12V / 12AH), CL12400 (12V / 40AH), CL12650 (12V / 65AH) batrị ma ọ bụ UL-mara BAZR2 na batrị BAZR8 nke ọkwa kwesịrị ekwesị.
Ihe nrụpụta batrị na AC (Fig 3, pg. 10):
Ọ chọrọ ijikọ ngwaọrụ nlekọta mkpesa nsogbu na mpụta akara [AC Fail, BAT Fail] na nrụgharị relay akara [NC, C, NO] na ngwaọrụ ngosi ngosi kwesịrị ekwesị. Jiri 22 AWG ruo 18 AWG maka ọdịda AC yana obere mkpesa batrị.
Iji gbuo oge mkpesa AC maka awa 2, tọọ mgbanwe DIP [AC Delay] na ọnọdụ gbanyụọ (Fig 3, pg. 10).
Iji gbuo oge mkpesa AC maka 1 min., tọọ mgbanwe DIP [AC Delay] na ọnọdụ ON (Fig 3, pg. 10).
Nkwụsị ike dị ala (Fig 3, pg. 10):
Iji mee ka nkwụsị ike mmepụta dị ala, tọọ mgba ọkụ DIP [Mkpuchi] na ọnọdụ ON.
Iji gbanyụọ nkwụsị nrụpụta dị ala, tọọ mgba ọkụ DIP [Mkpuchi] na ọnọdụ gbanyụọ.
Ntinye nke Tamper Switch (Fig. 3a, pg. 10):
Ugwu UL Edepụtara tamper mgba ọkụ (Altronix nlereanya TS112 ma ọ bụ dakọtara) n'elu nke ogige. Gbanye tamper mgbanaka nkwado n'elu nsọtụ nke ogige ahụ dịka 2" site n'akụkụ aka nri (Fig. 3a, pg. 10). Jikọọ tampgbanwee wiring gaa na ntinye Ogwe njikwa nnweta ma ọ bụ ngwaọrụ mkpesa UL Edepụtara kwesịrị ekwesị. Iji mee ka mgbaama mkpu rụọ ọrụ, mepee ọnụ ụzọ nke ogige ahụ.
Ntinye ọkụ ọtụtụ (Fig. 2, pg. 9) (UL anaghị enyocha ya):
Mgbe ị na-eji mgbakwunye ike mpụga Edepụtara, ndị jumpers J1 na J2 dị na bọọdụ ACM8CB kwekọrọ ga-ebipụ (Fig 2c, pg. 9 na Fig. 5, pg. 12). Jikọọ mpụga Edepụtara ikike njikwa ohere nwere oke ike na ọdụ akara akara [- Control +] (Nkwụsị ndị a na-adakọ na ọdụ [- Power +]). Mgbe ị na-eji akụrụngwa ọkụ DC, a ga-ahụrịrị polarity. Mgbe ị na-eji ọkụ ọkụ AC, ọ dịghị mkpa ka a hụ polarity (Fig 2d, pg. 9). A ghaghị ime njikọ wiring ubi niile na-eji waya CM ma ọ bụ FPL nwere jaket dabara adaba (ma ọ bụ ihe dochie anya) (Fig. 4a, pg. 11).

Nlekọta:

Ekwesịrị ịnwale otu ahụ ọbụlagodi otu ugboro n'afọ maka ịrụ ọrụ kwesịrị ekwesị dịka ndị a:

Nlekọta FACP:	Iji hụ na njikọ kwesịrị ekwesị na ịrụ ọrụ nke nkwụnye nkwụnye ọkụ ọkụ. Biko soro usoro kwesịrị ekwesị n'okpuru:
Ntinye na-emepe emepe:	Ịtụnye ntakịrị n'etiti ọnụ ụzọ akara [T] na [+ INP] ga-akpalite Kwupu oti mkpu ọkụ. Wepu mkpụmkpụ ka ịtọgharịa.
Ntinye na-emechikarị:	Iwepu waya na ọdụ akara akara [INP –] ga-akpalite Mkpu ọkụ Kwupu njikọ. Dochie waya na ọnụ nke akara [INP –] ka ịtọgharịa.
Ntinye sekit mgbama FACP:	Ọ dị mkpa ịkpalite Sistemụ Mkpu ọkụ. N'ọnọdụ niile dị n'elu, TRG LED nke ACM8CB ga-enwu. Nsonaazụ niile ahọpụtara maka Nkwụsị Mkpuchi Mkpuchi ọkụ ga-eme ka ewepụtara ngwaọrụ mkpọchi.

Mara: Nsonaazụ niile [OUT 1] - [OUT 8] ga-abụrịrị n'ọnọdụ nkịtị (na-agwụ ike) tupu anwale. Mgbe a na-ahazi unit ahụ maka Mepee Nkịtị (Fig 8, pg. 12) ma ọ bụ na-emechikarị (Fig 10, pg. 12) arụ ọrụ latching, ọ dị mkpa iji tọgharịa Mkpuchi Mkpuchi Ọkụ site na ịgbalite Nrụgharị Nrụgharị emechikarị.

Mmepụta Voltage nwale:	N'okpuru ọnọdụ ibu nkịtị, mmepụta DC voltage kwesịrị ịlele nke ọma voltage larịị (tụ aka na MaximalFD usoro nhazi Chart, pg. 3).
Nnwale batrị:	N'okpuru ọnọdụ ibu nkịtị lelee na chajịrị batrị zuru oke, lelee voltage na ọdụ batrị yana na bọọdụ akara akara [+ BAT -] iji hụ na enweghị nkwụsịtụ na wires njikọ batrị.

Mara: Ọnụ ego kachasị ugbu a bụ 1.54A. Ndụ batrị a na-atụ anya ya bụ afọ 5; Otú ọ dị, a na-atụ aro ka ịgbanwe batrị n'ime afọ 4 ma ọ bụ obere ma ọ bụrụ na ọ dị mkpa.
Nchọpụta Ọkụ Ọkụ Na-eweta Ike LED Diagnostics:

Uhie (DC)	Green (AC/AC1)	Ọkwa inye ike
ON	ON	Ọnọdụ ọrụ nkịtị.
ON	Gbanyụọ	Mfu nke AC. Batrị echere na-enye ike.
Gbanyụọ	ON	Enweghị mmepụta DC.
Gbanyụọ	Gbanyụọ	Mfu nke AC. Achụpụrụ ma ọ bụ enweghị batrị na-echere. Enweghị mmepụta DC.

Uhie (Bat)	Ọnọdụ batrị
ON	Ọnọdụ ọrụ nkịtị.
Gbanyụọ	Batrị ada ada/obere batrị.

Nchọpụta Ọkụkụ nke Onye njikwa ike nweta:

Ikanam	ON	Gbanyụọ
LED 1-Ikanam 8 (Uhie)	Mbupute relay (s) na-enye ike.	Mgbasa ozi (s) arụpụtaghị ike.
Trg (Green)	Ntinye FACP kpalitere (ọnọdụ mkpu).	FACP nkịtị (ọnọdụ enweghị mkpu).

Nkọwapụta batrị na bọọdụ na-eweta ike:

Batrị	Oke 11FD	Oke 33FD	Maximal55FD, Maximal75FD, na Maximal77FD
7 AH	Nkeji 30/4A*	Nkeji 10/6A	Nkeji 5/10A
12 AH	Nkeji 35/4A*	Nkeji 30/6A*	Nkeji 30/10A*
40 AH	Ihe karịrị awa anọ/4A*	Ihe karịrị awa anọ/4A*	Ihe karịrị awa anọ/2A*
65 AH	Ihe karịrị awa anọ/4A*	Ihe karịrị awa anọ/4A*	Ihe karịrị awa anọ/4A*

* Naanị nhazi ndị a ka enwere ike iji na nrụnye ULC-S319.

Ngosipụta ngwụcha Board Supply Power:

Akụkọ Mgbe Ebighị Ebi	Ọrụ/Nkọwa
L, G, N	Jikọọ 120VAC 60Hz na njedebe ndị a: L na-ekpo ọkụ, N na-anọpụ iche. Ejila ọnụ akara [G].
+ DC -	Ụlọ ọrụ ejikọrọ na bọọdụ ACM8.
A na-ahụ maka mkpali EOL	Ọkụ mkpu Interface na-akpalite ntinye site na mkpụmkpụ ma ọ bụ FACP. Ntinye ntinye nwere ike imeghe nke ọma, na-emechikarị ya site na sekit mmepụta FACP (ntinye nwere oke ike klaasị 2) (Fig 3, pg. 10).
Mba, Ntọgharịa GND	FACP interface latching ma ọ bụ na-abụghị nke (Klas 2 nwere oke ike) (Fig 3, pg. 10).
+ AUX –	Klas inyeaka 2 mmepụta nwere oke ike nyere @ 1A (anaghị agbanwe agbanwe) (Fig 3, pg. 10).
AC FAIL NC, C, NO	Na-egosi mfu nke ike AC, dịka ọmụmaatụ jikọọ na ngwaọrụ a na-anụ ma ọ bụ ogwe mkpu. A na-enyekarị ọkụ ọkụ mgbe ike AC dị. Ogo kọntaktị 1A @ 30VDC (Klas 2 nwere oke ike) (Fig 3, pg. 10).
BAT FAIL NC, C, NO	Na-egosi ọnọdụ batrị dị ala, dịka ọmụmaatụ jikọọ na panel mkpu. A na-enyekarị ọkụ ọkụ mgbe ike DC dị. Ogo kọntaktị 1A @ 30VDC. A na-akọ batrị ewepụrụ n'ime nkeji ise. A na-akọ njikọghachi batrị n'ime nkeji 1 (ike klaasị 2 nwere oke) (Foto 3, pg. 10).
+ BAT -	Njikọ batrị kwụrụ ọtọ. Ọnụ ego kachasị dị ugbu a 1.54A (na-enweghị ike) (Fig 3, pg. 10).

Nweta njirimara njedebe onye njikwa ike:

Akụkọ Mgbe Ebighị Ebi	Ọrụ/Nkọwa
– Ike +	12VDC ma ọ bụ 24VDC si ike ọkọnọ / chaja (ụlọ ọrụ ejikọrọ). Ọnụ ọnụ ndị a na-ejikọta na njedebe [- Control +].
– Njikwa +	Ọnụ ọnụ ndị a na-ejikọta ọnụ na ọdụ [- Power +]. Enwere ike ijikọ ọnụ ọnụ ndị a na ọkụ ọkụ njikwa ohere nwere oke ike edepụtara na mpụga iji nye ike ọrụ dịpụrụ adịpụ maka ngwaọrụ (UL anaghị enyocha ya). A ga-ewepụrịrị jumpers J1 na J2.
NDỊ MMADỤ 1- NTỤTA 8 IN, GND	Site na ntinye na-emepe emepe na/ma ọ bụ meghee ihe ntinye ihe na-emepe onye nchịkọta (rịọ ka ịpụ bọtịnụ, ụzọ ọpụpụ ụzọ, wdg.)
Mpụta 1- Mpụta 8 NC, C, NO, COM	12VDC ruo 24VDC na-akpalite nsonaazụ a na-achịkwa. Ibu kacha n'otu mmepụta bụ 2.5A.
	Maximal11FD: P/S 1 – 9.8-13.2VDC @ 3.3AP/S 2 – 9.8-13.2VDC @ 3.3A ma ọ bụ P/S 1 – 19.9-26.4VDC @ 3.6AP/S 2 – 19.9-26.4VDC ma ọ bụ @ 3.6-1VDC P/S 9.8 – 13.2-3.3VDC @ 2A na P/S 19.9 – 26.4-3.6VDC @ XNUMXA.
	Maximal33FD: P/S 1 – 9.7-13.2VDC @ 5.3AP/S 2 – 9.7-13.2VDC @ 5.3A ma ọ bụ P/S 1 – 19.8-26.4VDC @ 5.6AP/S 2 – 19.8-26.4VDC ma ọ bụ @ 5.6-1VDC P/S 9.7 – 13.2-5.3VDC @ 2A na P/S 19.8 – 26.4-5.6VDC @ XNUMXA.
	Maximal55FD: P/S 1 – 9.7-13.2VDC @ 9.3A na P/S 2 – 9.7-13.2VDC @ 9.3A.
	Maximal75FD: P/S 1 – 9.7-13.2VDC @ 9.3A na P/S 2 – 19.8-26.4VDC @ 9.6A.
	Maximal77FD: P/S 1 – 19.8-26.4VDC @ 9.6A na P/S 2 – 19.8-26.4VDC @ 9.6A.
	Ọdịda-Safe [NC positive (+) & COM Negative (-)], Fail-Secure [NO positive (+) & COM Negative (-)], mmepụta ihe enyemaka [C positive (+) & COM Negative (-)]. Mgbe ị na-eji AC ike ọkọnọ, ekwesighi ịhụ polarity. Egosiri kọntaktị na steeti anaghị akpalite.
FACP INTERFACE T, + INPUT	Ọkụ mkpu Interface na-akpalite ntinye sitere na FACP. Ntinye ntinye nwere ike imeghe nke ọma, na-emechikarị ya site na mmepụta sekit mgbama FACP (Figs. 5-9, pg. 12).
FACP INTERFACE NC, C, NO	Ụdị kọntaktị relay “C” nwere akara @ 1A 28VDC maka mkpesa mkpu (UL anaghị enyocha ya).

Mpụta Board Na-enye Ike Voltage Ntọala:

Nweta eserese ngwa ngwa njikwa ike (maka ACM8CB ọ bụla):

kpachara anya: Mgbe edobere bọọdụ ọkọnọ ike maka 12VDC jiri naanị otu (1) 12VDC nọrọ na batrị.
Debe wiwi nwere oke ike na enweghị oke. Jiri ohere kacha nta 0.25 inch.
Batrị 12AH nwere ike ịgbanye bụ batrị kachasị ukwuu nwere ike dabara na ogige a. Ekwesịrị iji mkpuchi batrị mpụga edepụtara UL ma ọ bụrụ na ị na-eji batrị 40AH ma ọ bụ 65AH.

Achọrọ Wiring nwere oke ike NEC:

Wiring sekit nwere oke na enweghị ike ga-anọrịrị iche na kọbọd. Waịkọ sekit niile nwere oke ike ga-adịrịrị opekata mpe 0.25” pụọ na wiwi sekit ọ bụla na-enweghị oke. Ọzọkwa, eriri sekit niile nwere oke ike na eriri sekit na-enweghị ike ga-abanye ma pụọ na kabinet site na ụzọ dị iche iche.
Otu dị otú ahụ exampE gosipụtara nke a n'okpuru. Ngwa gị akọwapụtara nwere ike ịchọ ka a ga-eji mkpọpu ikuku dị iche iche. Enwere ike iji ọkpọ ọkpọ ọ bụla mee ihe. Maka ngwa nwere oke ike, iji conduit bụ nhọrọ. A ga-emerịrị njikọ wiwi ubi niile na-eji waya CM ma ọ bụ FPL nwere jaket dabara adaba (ma ọ bụ ihe dochie ya).
A ga-etinyerịrị ebe nchekwa batrị UL edepụtara n'akụkụ ọkụ ọkụ site na usoro wiring Class 1. Maka nrụnye Canada na-eji wiwi mkpuchi mkpuchi maka njikọ niile.
Mara: Rụtụ aka na eserese njikwa waya dị n'okpuru maka ụzọ kwesịrị ekwesị isi tinye waya CM ma ọ bụ FPL nwere jaketị (Fig 4a).

Eserese FACP Hook Up:

ndetu:…..

EFlow Ike ọkọnọ/ chaja nwere ike ịbụ
A na-achịkwa yana nyochaa mgbe a na-akọ akụkọ
Ike/nyocha si n'ebe ọ bụla
na netwọkụ…

LINQ2 - Module Nkwukọrịta netwọkụ
LINQ2 na-enye ohere IP dịpụrụ adịpụ ịnweta data ozugbo sitere na eFlow ike ọkọnọ / chaja iji nyere aka mee ka sistemụ na-arụ ọrụ na ọkwa kachasị mma. Ọ na-eme ka nrụnye ngwa ngwa ma dị mfe na nhazi, na-ebelata oge nkwụsị nke usoro, ma wepụ oku ọrụ na-adịghị mkpa, nke na-enyere aka belata ngụkọta ọnụ ahịa nke ihe onwunwe (TCO) - yana ịmepụta isi iyi ọhụrụ nke Recurring Monthly Revenue (RMR).

Atụmatụ:
- UL edepụtara na US na Canada.
- Njikwa mpaghara ma ọ bụ nke dịpụrụ adịpụ ruo (2) mmepụta ike Altronix eFlow abụọ site na LAN na / ma ọ bụ WAN.
- Nyochaa nchọpụta oge: DC mmepụta voltage, mmepụta ugbu a, AC & batrị ọnọdụ/ọrụ, ntinye ihe na-akpalite mgbanwe steeti, mgbanwe ọnọdụ mmepụta, na ọnọdụ okpomọkụ.
- Nweta njikwa na njikwa onye ọrụ: Machibido ịgụ / dee, machibido ndị ọrụ ka ha nweta akụrụngwa akọwapụtara
– Abụọ (2) netwọk integral achịkwa Ụdị “C” Relays.
- Ihe ntinye ntinye nke atọ (3) nwere ike ime: njikwa relays na ike ọkụ site na isi mmalite ngwaike mpụga.
- Ozi email na Windows Dashboard
- ndekọ ihe omume na-edekọ akụkọ ihe mere eme.
- Nchekwa Socket Layer (SSL).
- Enwere ike ime ya site na USB ma ọ bụ web ihe nchọgharị – gụnyere ngwanrọ na-arụ ọrụ na eriri USB ft. 6.

LINQ2 na-agbago n'ime ogige MaximalF ọ bụla

Oke11FD/33FD/55FD/75FD/77FD Usoro nnweta ike njikwa (PTC) Ntuziaka nwụnye
Altronix abụghị maka mmejọ ederede ọ bụla.
140 58th Street, Brooklyn, New York 11220 USA | ekwentị: 718-567-8181 | faksị: 718-567-9056
websaịtị: www.altronix.com | ozi-e: info@altronix.com | Akwụkwọ ikike ndụ
IIMaximal11FD/33FD/55FD/75FD/77FD Series
H11U

Akwụkwọ / akụrụngwa

Altronix Maximal FD Series Dual Power Supply Access Controllers [pdf] Ntuziaka nwụnye
Kachasị FD Series Dual Power Supply Access Controllers Power Power, Maximal FD Series, Dual Power Supply Access Power Controllers, Dual Power Power Supply, Access Controllers Power Supply, Access Power Controllers, Power Supply, Maximal11FD, Maximal33FD, Maximal55FD, Maximal75FD, FD Maximal77

Ntụaka

Akwụkwọ ntuziaka onye ọrụ

Kachasị FD Series Dual ike nnweta ike njikwa ike