Altronix Maximal DV Series Single Power Inweta ikike nchịkwa nchịkwa ntuziaka

Karịa naanị ike.™
Usoro DV kacha
Otu ike inye
Nweta ndị njikwa ike (PTC)

ọdịnaya zoo

1 Kachasị DV Series Otu ike nweta ike njikwa ike

2 Usoro MaximalDV gafereview:

3 Atụmatụ usoro MaximalDV:

4 Ntuziaka nwụnye MaximalDV:

5 Nlekọta:

6 Nchọpụta Ọkụ Ọkụ Na-eweta Ike LED Diagnostics:

7 Ngosipụta ngwụcha Board Supply Power:

8 Nkọwapụta batrị na bọọdụ na-eweta ike:

9 Akwụkwọ / akụrụngwa

9.1 Ntụaka

10 Ozi ndị metụtara

Kachasị DV Series Otu ike nweta ike njikwa ike

Elsdị gụnyere:
Kachasị 3DV
- 12VDC @ 5A ma ọ bụ 24VDC @ 5.4A.
– Mpụta iri na isii (16) PTC echedoro.
Kachasị 5DV
- 12VDC @ 9A.
- Mpụta iri na isii (16) PTC echedoro.
Kachasị 7DV
- 24VDC @ 9.4A.
– Mpụta iri na isii (16) PTC echedoro.
Ntuziaka nwụnye

Mkpu 061307
Ụlọ ọrụ wụnye: _______________ Onye nnọchi anya ọrụ: ________________________________________________
Adreesị: ___________________________________________ Ekwentị #: __________________

Usoro MaximalDV gafereview:

Altronix MaximalDV Access Power/Controllers na-ekesa ma gbanwee ike iji nweta sistemụ njikwa na ngwa. Ha na-atụgharị 220VAC (nke na-arụ ọrụ 198VAC - 256VAC), ntinye 50/60Hz n'ime iri na isii (16) na-achịkwa onwe ya 12VDC ma ọ bụ 24VDC PTC. A na-arụ ọrụ mmepụta ya site na sink na-emeghe ma ọ bụ na-emepekarị (NO) akọrọ akọrọ ntinye ntinye site na Access Control System, Keypad, Push Button, REX PIR, wdg. nkeji ga-ebufe ike na ngwaọrụ dị iche iche nke njikwa ngwaike gụnyere Mag Locks, Ọkụ eletrik, ndị na-ejide ọnụ ụzọ ndọta, wdg FACP Interface na-enyere aka mgbapụ ihe mberede, na nlekota mkpu, ma ọ bụ enwere ike iji kpalite ngwaọrụ inyeaka ndị ọzọ. A na-ahọrọ njirimara nkwụsị ọkụ ọkụ n'otu n'otu maka ihe ọ bụla ma ọ bụ niile nke iri na isii (16).

Chart nhazi usoro MaximalDV:

Nọmba Model Altronix	Mpụta Board Na-enye Ike Voltage Nhọrọ	Mpụta PTC echedoro (nke a ga-emegharị ya na akpaaka)	Ngosipụta ihe n'otu n'otu (A)	220VAC 50 / 60Hz Tinye ihe osise ugbu a (A)	Ngosipụta Fuse Board na-enye ike
Kachasị 3DV	12VDC @ 5A ma ọ bụ 24VDC @ 5.4A	16	2.5A	1.5A	5A/250V
Kachasị 5DV	12VDC @ 9A	16		2.2A
Kachasị 7DV	24VDC @ 9.4A	16		3A

Atụmatụ usoro MaximalDV:

Iri na isii (16) na-ebute nsonaazụ a na-achịkwa n'onwe ya.
Nhọrọ mmepụta:
a) Iri na isii (16) Mwepụta ike nzacha na nke eletrọnịkị na-achịkwa nke dara ada.
b) Iri na isii (16) Mwepụta ike nzacha na nke eletrọnịkị na-achịkwa nke dara ada.
c) Ngwakọta ọ bụla nke dị n'elu.

Iri na isii (16) Ntinye njikwa sistemụ na-akpalite ntinye.
Nhọrọ ịkpalite ntinye:
a) Iri na isii (16) na-emeghekarị (MHỤKWU) ntinye mkpali akọrọ.
b) Ntinye iri na isii (16) ghe oghe.
c) Ngwakọta ọ bụla nke dị n'elu.
Iri na isii (16) nzacha na nzacha eletrọnịkị aux. mmepụta ike (a na-edepụta mmepụta @ 2.5A).

Igwe ọkụ na-acha uhie uhie na bọọdụ ACM8CB na-egosi na a na-ebute nsonaazụ nke onye ọ bụla (gbanye ọkụ).
Mwepu mkpu oku ọkụ (latching ma ọ bụ enweghị nkwụsị) bụ nke a na-ahọrọ n'otu n'otu maka ihe ọ bụla ma ọ bụ niile nke iri na isii (16).
Nhọrọ ntinye ihe mgbanye mgbanyụ ọkụ:
a) Ndenye mkpalite akọrọ na-emepe nke ọma (MENWEE) ma ọ bụ mechiri emechi (NC).
b) Ntinye ngbanwe polarity sitere na sekit mgbama FACP.

Green LED na bọọdụ ACM8CB na-egosi na agbanyere FACP.
Mgbasa ozi FACP na-egosi na etinyere FACP
Nhọrọ ntinye ọkụ:
a) Ọkụ ọkụ arụnyere ụlọ ọrụ na-enye ike nkịtị maka bọọdụ ACM8CB na ngwaọrụ njikwa ohere niile ejikọrọ.
b) Enwere ike ijikọ ọkụ mpụga nhọrọ iji kewapụ bọọdụ ACM8CB na ngwaọrụ njikwa ohere.

ACM8CB bọọdụ isi fuses ka akara @ 10A. A na-edepụta PTCs @ 2.5A.
Chaja arụnyere maka batrị lead acid ma ọ bụ ụdị gel nwere akara.
- Kachasị ụgwọ ugbu a bụ 0.7A maka AL600XB220 na AL1012XB220 ike ọkọnọ mbadamba.
- Kacha cha cha ugbu a bụ 3.6A maka AL1024XB2V ike ọkọnọ osisi.

Gbanwee akpaaka ka batrị nọrọ na-echere mgbe AC dara.
Zero voltage dobe mgbe unit ahụ gafere na ndabere batrị (ọnọdụ ọdịda AC).
Mkpirisi sekit na nchekwa oke ọkụ yana nrụpụta akpaaka.
Ntinye aka Green AC na ihe ngosi ọkụ DC na-acha uhie uhie na bọọdụ ọkọnọ ike.

AC dara ma batrị ada ada (ụdị kọntaktị “C” nwere akara @ 1A/28VDC).
Nlekọta ọnụnọ batrị (ụdị kọntaktị “C” nwere akara @ 1A/28VDC) .

Ihe mkpuchi ahụ na-anabata ihe ruru batrị anọ (4) 12VDC/12AH.
Akụkụ mkpuchi (H x W x D): 26" x 19" x 6.25" (660.4mm x 482.6mm x 158.8mm).

Ntuziaka nwụnye MaximalDV:

Ụzọ wiwi kwesịrị ịdị n'ụzọ kwekọrọ na National Electric Code/NFPA 70/NFPA 72/ANSI, yana koodu mpaghara na ndị ọchịchị niile nwere ikike. Ezubere ngwaahịa a maka naanị ime ụlọ.

Nchọpụta Ọkụ Ọkụ Na-enye Ike LED Diagnostics	(pg. 6)
Ịnweta ihe nleba anya nke ọkụ ọkụ LED	(pg. 6)
Ngosipụta njedebe Board Supply Board	(pg. 6)
Nweta njirimara njedebe onye njikwa ike	(pg. 6)
Nkọwapụta batrị na-akwado bọọdụ na-eweta ike	(pg. 7)
Mpụta Board Na-enye Ike Voltage Ntọala	(pg. 7)
Nweta eserese ngwa ngwa njikwa ike	(pg. 8)
Eserese FACP/Nhọrọ inye nkonye ike	( peeji nke 14-15 )

Wụnye otu n'ime ebe achọrọ. Kaa akara na prerill oghere na mgbidi ka kwụ n'ahịrị n'ahịrị igodo atọ dị n'elu n'ogige ahụ. Wụnye ihe nkwụnye elu atọ na kposara na mgbidi na isi ihe nkedo na-apụta. Tinye oghere igodo elu nke ogige ahụ n'elu kposara elu atọ; larịị na nchekwa. Kaa akara ọnọdụ nke oghere atọ dị ala. Wepu ihe mkpuchi ahụ. Gwuo oghere ndị dị ala ma wụnye ngwa ngwa atọ. Tinye oghere igodo elu nke ogige ahụ n'elu skru atọ dị elu. Wụnye skru atọ dị ala ma jide n'aka na ị ga-eme ka skru niile sie ike (Mpaghara mkpuchi, pg.16).
Ejikọtara ala ụwa na mgbachi. Jikọọ isi ala na-abata na ala (nchekwa) ala lug.
Jikọọ ike AC akwụghị ụgwọ (220VAC 50/60Hz) na njedebe akara [L, N] na bọọdụ ọkọnọ ọkụ. Green alaka waya jikọọ ụwa (nchekwa) ala lug. Jiri 14 AWG ma ọ bụ karịa maka njikọ ike niile. Debe wiwi nwere oke ike iche na wiwi na-enweghị ike (Ntinye 220VAC 50/60Hz, Wires batrị). Ekwesịrị ịnye oghere kacha nta 0.25.
kpachara anya: Emetụla akụkụ ọla ndị ekpughere ekpughere aka. Mechie ike sekit alaka ụlọ ọrụ tupu ịwụnye ma ọ bụ na-arụ ọrụ. Enweghị akụkụ ndị ọrụ ga-arụ ọrụ n'ime. Tụtụ aka na nrụnye na ọrụ nye ndị ọrụ ruru eru.

Họrọ mmepụta DC chọrọ voltage site n'itinye SW1 n'ọnọdụ kwesịrị ekwesị na Maximalal3DV ike ọkọnọ, (Fig. 1, pg. 7). Maximal5DV ike ọkọnọ bụ factory atọrọ na 12VDC na Maximal7DV ike ọkọnọ bụ factory atọrọ na 24VDC.
Tule mmepụta voltage nke unit tupu ijikọ ngwaọrụ ọ bụla iji hụ na arụ ọrụ kwesịrị ekwesị. Na-ezighi ezi ma ọ bụ elu voltage ga-emebi ngwaọrụ ndị a.

Nhọrọ mmepụta (Fig 2, pg. 7): Ngalaba ahụ ga-enye nchikota ọ bụla nke Fail-Safe na/ma ọ bụ Fail-Secure switched power.
(a) Mbupute ọkụ agbanweela nke ọma:
Maka arụmọrụ Fail-Safe jikọọ ndenye dị mma (+) nke ngwaọrụ njikwa ohere na ọdụ akara [NC]. Jikọọ ntinye na-adịghị mma (-) nke ngwaọrụ njikwa ohere na njedebe akara [COM].
(b) Mbupute ọkụ agbanweela nke dara ada:
Maka ọrụ Fail-Secure jikọọ ndenye dị mma (+) nke ngwaọrụ njikwa ohere na ọdụ akara akara [NO]. Jikọọ ntinye na-adịghị mma (-) nke ngwaọrụ njikwa ohere na njedebe akara [COM].
Ntinye ike inyeaka (anaghị agbanwe): Jikọọ ngwaọrụ njikwa ohere nke chọrọ ike mgbe niile na njedebe akara [C] nti (+) na [COM] adịghị mma (-).

Nhọrọ ntinye ntinye (Fig. 2, pg. 7):
(a) Na-emepekarị mkpalite ntinye [NO]: Ntinye 1-8 na-arụ ọrụ site na ntinye sink na-emeghe ma ọ bụ mepere emepe. Jikọọ ntinye njikwa njikwa ohere, ahụigodo, bọtịnụ ntinye, REX PIRs, wdg na njedebe akara [IN] na [GND].
(b) Mepee ihe ntinye ihe mkpokọ mkpokọta:
Jikọọ ogwe njikwa ohere mepere onye na-anakọta sink positive (+) na ọdụ akara akara [IN] yana nke ọjọọ (-) na njedebe akara [GND].
Nhọrọ Interface Oti mkpu (Fig. 9-12, pg. 13-14):
Ntinye ntinye nke emechiri emechi [NC] ma ọ bụ nke na-emeghe [NO] site na ogwe njikwa ọkụ ma ọ bụ ndenye ngbanwe polarity sitere na sekit mgbama FACP ga-emetụta nsonaazụ ahọpụtara. Iji mee ka FACP kwupu maka mmepụta, gbanye mgba ọkụ kwekọrọ na bọọdụ ACM1CB ọ bụla. Iji gbanyụọ nkwụsị FACP maka mmepụta, gbanye mgba ọkụ kwekọrọ na bọọdụ ACM8CB ọ bụla.
(a) Ntinye [NO] na-emepe nke ọma:
Maka nko-elu na-adịghị ejigide na-ezo aka na Fig. 9, pg. 13. N'ihi na latching nko-elu na-ezo aka fig. 10, pg. 13.
(b) Ntinye [NC] na-emechikarị:
Maka nko-elu na-adịghị ejigide na-ezo aka na Fig. 11, pg. 14. N'ihi na latching nko-elu na-ezo aka na fig. 12, pg. 14.
(c) FACP mgbama mgbanye mgbanye mgbanye sekit:
Jikọọ ihe dị mma (+) na nke na-adịghị mma (-) site na mmepụta sekit mgbama FACP na njedebe akara [+ INP -]. Jikọọ FACP EOL na njedebe akara [+ RET -] (a na-ezo aka na polarity na ọnọdụ mkpu). A ghaghị ịkpụcha jumper dị n'akụkụ TRG LED (Fig 2a, pg. 7 na Fig. 8, pg. 13).

Ụdị akọrọ FACP “C” mmepụta (Fig. 2b, pg. 7):
Enwere ike iji kọntaktị ụdị FACP "C" kpalite mkpesa ma ọ bụ ngwaọrụ mgbaàmà. Kọntaktị ndị a na-agbanye n'elu ntinye oti mkpu ọkụ na bọọdụ ACM8CB.
Njikọ batrị guzoro n'akụkụ (Fig. 3, pg. 8):
Maka ngwa njikwa nnweta batrị bụ nhọrọ. Ọ bụrụ na ejighị batrị, mfu nke AC ga-ebute mfu nke mmepụta voltage. Batrị ga-abụrịrị ụzọ acid ma ọ bụ gel ụdị. Jikọọ otu (1) 12VDC batrị na njedebe akara [+ BAT -] maka ọrụ 12VDC (Fig 3a, pg. 8). Jiri batrị abụọ (2) 12VDC etinyere n'usoro maka ọrụ 24VDC.

Ihe nrụpụta batrị na AC (fig. 3-4, pg. 8-9):
Ọ chọrọ ijikọ ngwaọrụ na-enye mkpesa nsogbu nlekọta na nsonaazụ akara [AC Fail, BAT FAIL] na [Power Fail] nke akara ngosi akara [NC, C, NO] na ngwaọrụ ngosi dabara adaba. Jiri 22 AWG ruo 18 AWG maka AC ọdịda & obere/enweghị mkpesa batrị.
Ntinye nke tamper mgbanwe (Fig. 3-4, pg. 8-9):
Ugwu UL Edepụtara tamper mgba ọkụ (Honeywell Model 112 ma ọ bụ dakọtara) n'elu nke ogige. Gbanye tamper mgbanaka nkwado n'elu nsọtụ nke ihe mkpuchi ahụ dịka 2" site n'akụkụ aka nri (Figs. 3b na 4a, pgs. 8-9). Jikọọ tampma gbanwee wiring gaa na ntinye Control Panel ma ọ bụ ngwaọrụ mkpesa kwesịrị ekwesị. Iji mee ka mgbaama mkpu rụọ ọrụ, mepee ọnụ ụzọ nke ogige ahụ.

Ọtụtụ ntinye ọkụ ọkụ (Fig. 2, pg. 7):
Mgbe ị na-eji ike mpụga ọzọ, jumpers J1 na J2 dị na mbadamba ACM8CB kwekọrọ ga-ebipụ (Fig 2c, 2d, pg. 7 na Fig. 7, pg. 12). Jikọọ ike maka bọọdụ ACM8CB na njedebe akara [- Power +] wee jikọọ ike maka ngwaọrụ njikwa ohere na ọdụ ndị akara [- Control +]. Mgbe ị na-eji DC ike ọkọnọ a ga-ahụ polarity. Mgbe ị na-eji AC ike ọkọnọ polarity ekwesịghị ịhụ (Fig. 2d, pg. 7). A ga-emerịrị njikọ wiring ubi niile na-eji waya CM ma ọ bụ FPL nwere jaket dabara adaba (ma ọ bụ ihe dochie anya) (Figs. 5a na 6a, pgs. 10-11).

Nlekọta:

Ekwesịrị ịnwale otu ahụ ọbụlagodi otu ugboro n'afọ maka ịrụ ọrụ kwesịrị ekwesị dịka ndị a:

Nlekọta FACP:	Iji hụ na njikọ kwesịrị ekwesị na ịrụ ọrụ nke nkwụnye nkwụnye ọkụ ọkụ. Biko soro usoro kwesịrị ekwesị n'okpuru:
Ntinye na-emepe emepe:	Ịtụnye obere oge n'etiti ọnụ ụzọ akara [T] na [+ INP] ga-akpalite nkwụsị ọkụ ọkụ. Wepu mkpụmkpụ ka ịtọgharịa.
Ntinye na-emechikarị:	Wepu waya na ọnụ nke akara [INP –] ga-akpalite Mkpu ọkụ Kwupu njikọ. Dochie waya na ọnụ nke akara [INP –] ka ịtọgharịa.
Ntinye sekit mgbama FACP:	Ọ dị mkpa ịkpalite Sistemụ Mkpu ọkụ. N'ọnọdụ niile dị n'elu, TRG LED nke ACM8CB ga-enwu gbaa. Nsonaazụ niile ahọpụtara maka Mgbasa Mkpu Mkpuchi Ọkụ ga-eme ka ewepụtara ngwaọrụ mkpọchi. Mara: Nsonaazụ niile [OUT 1 – OUT 8] ga-abụrịrị n'ọnọdụ nkịtị (na-agwụ ike) tupu nnwale. Mgbe a na-ahazi unit ahụ maka Open Normal (Fig 10, pg. 13) ma ọ bụ na-emechikarị (Fig 12, pg. 14) na-arụ ọrụ latching ọ dị mkpa iji tọgharịa Mkpuchi Mkpuchi Ọkụ site n'ịgbalite Nrụgharị Nrụgharị emechikarị.
Mmepụta Voltage nwale:	N'okpuru ọnọdụ ibu nkịtị, mmepụta DC voltage kwesịrị ịlele nke ọma voltagna ọkwa (Nkọwapụta nkọwapụta bọọdụ na-eweta ike na-akwado batrị, pg. 7).
Nnwale batrị:	N'okpuru ibu nkịtị, ọnọdụ lelee na chajịrị batrị zuru oke, lelee voltage na ọdụ batrị yana na bọọdụ akara akara [+ BAT -] iji hụ na enweghị nkwụsịtụ na wires njikọ batrị. Mara: AL600XB220 na AL1012XB220 Power Supply Board kacha ụgwọ ugbu a bụ 0.7A. AL1024XB2V Power Supply Board kacha ụgwọ ugbu a bụ 3.6A. Ndụ batrị a na-atụ anya ya bụ afọ 5; Otú ọ dị, a na-atụ aro ka ịgbanwe batrị n'ime afọ 4 ma ọ bụ obere ma ọ bụrụ na ọ dị mkpa.

Nchọpụta Ọkụ Ọkụ Na-eweta Ike LED Diagnostics:

Ikanam		Ọkwa inye ike
Uhie (DC)	Green (AC)	Ọkwa inye ike
ON	ON	Ọnọdụ ọrụ nkịtị.
ON	Gbanyụọ	Mfu nke AC. Ike inye batrị guzoro ọtọ.
Gbanyụọ	ON	Enweghị mmepụta DC. Mkpirisi sekit ma ọ bụ ọnọdụ ebufe ọkụ.
Gbanyụọ	Gbanyụọ	Enweghị mmepụta DC. Mfu nke AC. Achụpụrụ batrị.

Uhie (Bat)	Ọnọdụ batrị
ON	Ọnọdụ ọrụ nkịtị.
Gbanyụọ	Batrị ada ada/obere batrị.

Nchọpụta Ọkụkụ nke Onye njikwa ike nweta:

Ikanam	ON	Gbanyụọ
LED 1-Ikanam 8 (Uhie)	Mbupute relay (s) na-enye ike.	Mgbasa ozi (s) arụpụtaghị ike.
Trg (Green)	Ntinye FACP kpalitere (ọnọdụ mkpu).	FACP nkịtị (ọnọdụ enweghị mkpu).

Ngosipụta ngwụcha Board Supply Power:

Akụkọ Mgbe Ebighị Ebi	Ọrụ/Nkọwa
L, G, N	Jikọọ 220VAC 50/60Hz na njedebe ndị a: L na-ekpo ọkụ, N na-anọpụ iche.
+ DC -	Maximal3DV - 12VDC @ 5A ma ọ bụ 24VDC @ 5.4A ruo bọọdụ ACM8CB. Maximal5DV – 12VDC @ 9A ruo bọọdụ ACM8CB. Maximal7DV – 24VDC @ 9.4A gaa na bọọdụ ACM8CB.
AC FAIL NC, C, NO	Na-egosi mfu nke ike AC, dịka ọmụmaatụ jikọọ na ngwaọrụ a na-anụ ma ọ bụ ogwe njikwa ohere. A na-enyekarị ọkụ ọkụ mgbe ike AC dị. Ogo kọntaktị 1A @ 28VDC. A na-akọ AC ma ọ bụ brownout ọdịda n'ime nkeji 1 nke mmemme ahụ.
BAT FAIL NC, C, NO	Na-egosi ọnọdụ batrị dị ala, dịka ọmụmaatụ jikọọ iji nweta ogwe njikwa. A na-enyekarị ọkụ ọkụ mgbe ike DC dị. Ogo kọntaktị 1A @ 28VDC. A na-akọ batrị ewepụrụ n'ime nkeji ise. A na-akọ njikọghachi batrị n'ime nkeji 5. Ọkwa batrị dị ala: 12VDC mmepụta ụzọ atọrọ @ odika 10.5VDC. 24VDC mmepụta ụzọ atọrọ @ odika 21VDC.
+ BAT -	Njikọ batrị kwụrụ ọtọ. Jikọọ otu (1) 12VDC batrị na njedebe akara [+ BAT -] maka ọrụ 12VDC (Fig 3a, pg. 8). Jiri batrị abụọ (2) 12VDC etinyere n'usoro maka ọrụ 24VDC (Fig 4, pg. 9).

Nweta njirimara njedebe onye njikwa ike:

Akụkọ Mgbe Ebighị Ebi	Ọrụ/Nkọwa
– Ike +	Ntinye 12VDC ma ọ bụ 24VDC sitere na bọọdụ ọkọnọ ike.
– Njikwa +	Ọ metụtaghị.
NDỊ MMADỤ 1- NTỤTA 8 IN, GND	Site na ntinye na-emepe emepe na/ma ọ bụ meghere ihe ntinye ihe na-emepe onye na-anakọta ihe (rịọ ka ịpụpụ bọtịnụ, ọpụpụ pir, wdg).
Mpụta 1- Mpụta 8 NC, C, NO, COM	12VDC ruo 24VDC na-akpalite nsonaazụ a na-achịkwa: Ọdịda-Safe [NC positive (+) & COM Negative (-)], Fail-Secure [NO positive (+) & COM Negative (-)], mmepụta ihe enyemaka [C nti (+) & COM Negative (-)] Mgbe iji AC ike ọkọnọ polarity ekwesịghị ịhụ. NC, C, Ọ DỊGHỊ tọghatara gaa n'ụdị akọrọ "C" 5A 24VAC/VDC gosiri ọkwa akọrọ mgbe ewepụrụ fuses. Egosiri kọntaktị na steeti anaghị akpalite.
FACP INTERFACE T, + INPUT –	Ọkụ mkpu Interface na-akpalite ntinye sitere na FACP. Ntinye ntinye nwere ike imeghe nke ọma, na-emechikarị ya site na mmepụta sekit mgbama FACP (Fig. 8-12, pg. 13-14).
FACP INTERFACE NC, C, NO	Ụdị kọntaktị relay “C” nwere akara @ 1A/28VDC maka mkpesa mkpu.

Nkọwapụta batrị na bọọdụ na-eweta ike:

Ụdị Altronix:	Board na-enye ike	Batrị	20 Min. nke ndabere	4 elekere. nke ndabere	24 elekere. nke ndabere
Kachasị 3DV	AL600XB220 (Rụtụ aka na Fig. 1a, pg. 7 maka mgbanwe [SW1] na ọnọdụ)	12VDC/40AH*	N/A	5.0A	N/A
Kachasị 3DV		24VDC/40AH*	N/A	5.4A	0.7A
Kachasị 5DV	AL1012XB220 (Ụlọ ọrụ atọrọ na 12VDC)	12VDC/12AH	9.0A	Ike batrị maka njikere ihe mberede: opekata mpe 20 min.	N/A
Kachasị 7DV	Ọnụahịa kasị elu nke AL1024XB2V (Ụlọ ọrụ atọrọ na 24VDC)	24VDC/12AH	7.7A	1.2A	200mA
Kachasị 7DV	Ọnụahịa kasị elu nke AL1024XB2V (Ụlọ ọrụ atọrọ na 24VDC)	24VDC/65AH*	N/A	7.7A	1.2A

* Mara: Achọrọ mkpuchi batrị agbakwunyere (Fig 5-7, pgs. 10-12).

Nweta eserese ngwa ngwa njikwa ike (maka ACM8CB ọ bụla):

Debe wiwi nwere oke ike na enweghị oke. Jiri opekempe 0.25" oghere.
Ihe ruru batrị anọ (4) 12AH nwere ike ịchaji bụ batrị kacha ibu nwere ike dabara na ogige a.
Ekwesịrị iji mkpuchi batrị mpụga ma ọ bụrụ na ị na-eji batrị 40AH ma ọ bụ 65AH.

Achọrọ Wiring nwere oke ike NEC maka Maximal3DV:
Wiring sekit nwere oke na enweghị ike ga-anọrịrị iche na kọbọd. Waịkọ sekit niile nwere oke ike ga-adịrịrị opekata mpe 0.25” pụọ na wiwi sekit ọ bụla na-enweghị oke. Ọzọkwa, eriri sekit niile nwere oke ike na eriri sekit na-enweghị ike ga-abanye ma pụọ na kabinet site na ụzọ dị iche iche.
Otu dị otú ahụ exampE gosipụtara nke a n'okpuru. Ngwa gị akọwapụtara nwere ike ịchọ ka a ga-eji mkpọpu ikuku dị iche iche. Enwere ike iji ọkpọ ọkpọ ọ bụla mee ihe. Maka ngwa nwere oke ike, iji conduit bụ nhọrọ. A ga-emerịrị njikọ wiwi ubi niile na-eji waya CM ma ọ bụ FPL nwere jaket dabara adaba (ma ọ bụ ihe dochie ya).
Mara: Rụtụ aka na eserese njikwa waya dị n'okpuru maka ụzọ kwesịrị ekwesị isi tinye waya CM ma ọ bụ FPL nwere jaketị (Fig 5a).

Achọrọ Wiring nwere oke ike NEC maka Maximal5DV:
Wiring sekit nwere oke na enweghị ike ga-anọrịrị iche na kọbọd. Waịkọ sekit niile nwere oke ike ga-adịrịrị opekata mpe 0.25” pụọ na wiwi sekit ọ bụla na-enweghị oke. Ọzọkwa, eriri sekit niile nwere oke ike na eriri sekit na-enweghị ike ga-abanye ma pụọ na kabinet site na ụzọ dị iche iche.
Otu dị otú ahụ exampE gosipụtara nke a n'okpuru. Ngwa gị akọwapụtara nwere ike ịchọ ka a ga-eji mkpọpu ikuku dị iche iche. Enwere ike iji ọkpọ ọkpọ ọ bụla mee ihe. Maka ngwa nwere oke ike iji conduit bụ nhọrọ. A ga-emerịrị njikọ wiwi ubi niile na-eji waya CM ma ọ bụ FPL nwere jaket dabara adaba (ma ọ bụ ihe dochie ya).
Mara: Rụtụ aka na eserese njikwa waya dị n'okpuru maka ụzọ kwesịrị ekwesị isi tinye waya CM ma ọ bụ FPL nwere jaketị (Fig 6a).

Achọrọ Wiring nwere oke ike NEC maka Maximal7DV:
Wiring sekit nwere oke na enweghị ike ga-anọrịrị iche na kọbọd. Waịkọ sekit niile nwere oke ike ga-adịrịrị opekata mpe 0.25” pụọ na wiwi sekit ọ bụla na-enweghị oke. Ọzọkwa, eriri sekit niile nwere oke ike na eriri sekit na-enweghị ike ga-abanye ma pụọ na kabinet site na ụzọ dị iche iche.
Otu dị otú ahụ exampE gosipụtara nke a n'okpuru. Ngwa gị akọwapụtara nwere ike ịchọ ka a ga-eji mkpọpu ikuku dị iche iche. Enwere ike iji ọkpọ ọkpọ ọ bụla mee ihe. Maka ngwa nwere oke ike, iji conduit bụ nhọrọ. A ga-emerịrị njikọ wiwi ubi niile na-eji waya CM ma ọ bụ FPL nwere jaket dabara adaba (ma ọ bụ ihe dochie ya).
Mara: Rụtụ aka na eserese njikwa waya dị n'okpuru maka ụzọ kwesịrị ekwesị isi tinye waya CM ma ọ bụ FPL nwere jaketị (Fig 7a).

Eserese FACP Hook Up:
Fig. 8 Ntinye ngbanwe nke polarity sitere na mmepụta sekit mgbama FACP (a na-ezo aka na polarity na ọnọdụ mkpu):

Eserese FACP nko-elu (na-aga n'ihu):

Altronix abụghị maka mmejọ ederede ọ bụla.
140 58th Street, Brooklyn, New York 11220 USA | ekwentị: 718-567-8181 | faksị: 718-567-9056
websaịtị: www.altronix.com | ozi-e: info@altronix.com | Akwụkwọ ikike ndụ
IMaximal3DV/5DV/7DV Series
G26U

Akwụkwọ / akụrụngwa

Altronix Maximal DV Series Single Power Supply Access Controllers [pdf] Ntuziaka nwụnye
Maximal3DV, Maximal5DV, Maximal7DV, Maximal DV Series Single Power Supply Access Power Controllers, Maximal DV Series, Single Power Supply Access Power Controllers, Access Power Controllers, Power Controllers, Controllers

Ntụaka

Akwụkwọ ntuziaka onye ọrụ