Altronix ACM8 Series UL Edepụtara Sub-Agbakọ nweta ikike nchịkwa ntuziaka ntuziaka.

Karịa naanị ike.™
ACM8 usoro
Ọgbakọ UL edepụtara
Nweta ndị njikwa ike

Elsdị gụnyere:
ACM8
– Asato (8) ihe echekwabara fiusi
ACM8CB
– Mpụta asatọ (8) PTC echedoro
Ntuziaka nwụnyeMkpu 031819

ọdịnaya zoo

5 Tebụlụ njirimara njedebe:

6 Eserese ngwa a na-ahụkarị:

7 Eserese Nkọ:

8 Akwụkwọ / akụrụngwa

8.1 Ntụaka

gafereview:

Altronix ACM8 na ACM8CB UL Edepụtara Sub-Assembly Multi-Output Access Power Controllers na-atụgharị otu (1) 12 ruo 24 volt DC ntinye n'ime asatọ (8) na-ejide onwe ya ma ọ bụ ihe echedoro PTC. Enwere ike ịtụgharị nsonaazụ ike ndị a ka ọ bụrụ kọntaktị “C” kpọrọ nkụ (naanị ụdị agwakọta). A na-arụ ọrụ mmepụta site na sink oghe oghe ma ọ bụ na-emeghe [NO] akọrọ ọkpọkọ ntinye sitere na Access Control System, Card Reader, Keypad, Push Button, PIR, etc. The units will route power to a different access control devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Mpụta ga-arụ ọrụ na ma ọdịda-Nchekwa na / ma ọ bụ ọdịda mode. Emebere nkeji ka enwere ike site na otu isi iyi ike na-arụ ọrụ nke ga-enye ike maka ma ọrụ bọọdụ na ngwaọrụ mkpọchi, ma ọ bụ abụọ (2) isi iyi ike zuru oke, otu (1) na-enye ike maka ịrụ ọrụ bọọdụ yana nke ọzọ maka ike mkpọchi / ngwa ngwa. Interface FACP na-enyere mgbapụ ihe mberede, nlekota mkpu, ma ọ bụ enwere ike iji kpalite ngwaọrụ inyeaka ndị ọzọ. A na-ahọrọ njirimara nkwụsị ọkụ ọkụ n'otu n'otu maka ihe ọ bụla ma ọ bụ niile nke asatọ (8).

Chart ntụtụ aka nhazi usoro ACM8 na ACM8CB:

Nọmba Model Altronix	Ọnụọgụ nke mmepụta	Echekwara fuse Nsonaazụ	PTC echekwara Na-emegharị onwe ya Nsonaazụ	Ntụle mmepụta	Klas 2 kwadoro Enwere oke ike	Ndepụta ụlọ ọrụ	Ndepụta UL na File Ọnụọgụ
ACM8	8		–	3.5A	*	Ọgbakọ	UL File # BP6714 Edepụtara UL maka nkeji sistemụ njikwa nnweta (UL 294**). “Ngwaọrụ mgbaama” enyochara na ọkọlọtọ CSA C22.2 No.205-M1983
ACM8CB	8	–		2.5A		Ọgbakọ

* Mgbe ejiri ya na klaasị 2 nwere oke ọkụ ọkụ nwere oke.
** Nweta ọkwa arụmọrụ njikwa: Mwakpo mbibi – I; Ntachi obi - IV; Nchekwa ahịrị - I; Njikere Ike - I.

Nkọwapụta:

12 ruo 24 volt DC arụ ọrụ (nhazi anaghị achọ).
(0.5A @ 12 volt, 0.3A @ 24 volt oriri ugbu a na-enye ike relays niile).
Nhọrọ ntinye ọkụ:
a) Otu (1) ntinye ike nkịtị (osisi na mkpọchi ike).
b) Ntinye ike abụọ (2) dịpụrụ adịpụ (otu (1) maka ike osisi na otu (1) maka ike mkpọchi / ngwaike).

Ndenye Sistemụ Njikwa ohere ịnweta asatọ (8)
a) Ntinye asatọ (8) na-emeghekarị (NO).
b) Asato (8) ihe ntinye mmiri na-anakọta oghere.
c) Ngwakọta ọ bụla nke dị n'elu.
Mpụta asatọ (8) na-achịkwa onwe ya:
a) asatọ (8) Mpụta ike nchekwa na/ma ọ bụ ọdịda-echekwabara.
b) Atọọ (8) akọrọ ụdị “C” 5A nke agbanyere agbagharị agbagharị.
c) Ngwakọta ọ bụla nke dị n'elu.

Mpụta ike inyeaka asatọ (8) enweghị nkenke.
Ngosipụta arụpụta:
- Fuses na-egosi 3.5A nke ọ bụla.
- PTC bụ 2.5A nke ọ bụla.

A na-atụle fiusi isi na 10A.
Mara: A na-ekpebi mkpokọta mmepụta ugbu a site na ọkụ ọkụ, ọ gaghị agafe karịa mkpokọta 10A.
Igwe ọkụ na-acha uhie uhie na-egosi na a na-ebute mpụta (relays ume).

Ịkwụsị Mkpọ oku ọkụ (latching ma ọ bụ enweghị nkwụsị) bụ nke a na-ahọrọ n'otu n'otu maka ihe ọ bụla ma ọ bụ niile nke asatọ (8).
Nhọrọ ntinye mgbakwụnye ọkụ ọkụ:
a) na-emepekarị [NO] ma ọ bụ na-emechikarị [NC] ntinye kọntaktị akọrọ.
b) Ntinye ngbanwe polarity sitere na sekit mgbama FACP.
Ntugharị mmepụta FACP (ụdị kọntaktị “C” nwere akara @ 1A/28VDC, UL anaghị enyocha ya).

Green LED na-egosi mgbe akwụpụrụ FACP.
Ihe mgbochi ọnụ nke mbughari na-eme ka nrụnye dị mfe.

Akụkụ bọọdụ (L x W x H): 7.65" x 4.125" x 1.25" (194.3mm x 104.8mm x 31.8mm)
Board dabara 6.7" x 3.7" (170.2mm x 94mm) na 4.9" x 2.4" (124.5mm x 64mm) arịọnụ ụkpụrụ.
Ntachi obi nke oghere oghere: +/- 0.04 inch (1mm).

Ntuziaka nwụnye:

Ụzọ wiwi ga-adị n'ụzọ kwekọrọ na National Electric Code/NFPA 70/NFPA 72/ANSI, yana koodu mpaghara na ndị ọchịchị niile nwere ikike. Ezubere ngwaahịa maka naanị ime ụlọ ma ndị ọrụ tozuru oke kwesịrị itinye ya.

Rụtụ aka na ntuziaka nwụnye nke obere ọgbakọ maka ịgbanye Mkpu. MS020119.
Jiri nlezianya review:
Eserese ngwa a na-ahụkarị (pg. 5)
Ihe nchọpụta LED (pg. 4)
Tebụlụ njirimara njedebe (pg. 4)
Eserese njikọta (pg. 6-7)
Ntinye ike ọkọnọ:
Enwere ike ịgbanye nkeji ahụ na otu (1) ọkụ ọkụ nke ga-enye ike maka ọrụ abụọ nke ụlọ ọrụ na ngwaọrụ mkpọchi ma ọ bụ abụọ (2) ọkụ eletrik dị iche iche, otu (1) iji nye ike maka ọrụ ụlọ ọrụ na nke ọzọ iji nye ike maka mkpuchi mkpuchi na / ma ọ bụ ịnweta ngwaike njikwa.
Mara: Ike ntinye nwere ike ịbụ 12 ruo 24 volts DC (0.5A @ 12 volt, 0.3A @ 24 volt oriri dị ugbu a yana ike relays niile).
(a) Otu ntinye ọkụ ọkụ:
Ọ bụrụ na a ga-agbanye unit na ngwaọrụ mkpọchi site na iji otu ọkụ, jikọọ mmepụta (12 ruo 24 volts DC) na njedebe akara [- Power +].
(b) Ntinye ọkụ abụọ (Fig 1c, pg. 4):
Mgbe achọrọ iji ọkụ ọkụ abụọ, jumpers J1 na J2 (nke dị n'aka ekpe nke ọdụ ike / njikwa) ga-ebipụ. Jikọọ ike maka unit ahụ na njedebe akara [- Control +] wee jikọọ ike maka ngwaọrụ mkpọchi na njedebe akara [- Power +].
Mara: Mgbe ị na-eji DC ike ọkọnọ a ga-ahụ polarity. Mgbe ị na-eji AC ike ọkọnọ polarity ekwesịghị ịhụ (Fig. 1d, pg. 4). Ngwa AC UL anaghị enyocha ya.
Mara: Maka nnabata UL, akụrụngwa ọkụ ga-abụrịrị UL Edepụtara maka Sistemụ Njikwa Nweta yana ngwa.

Nhọrọ mmepụta (Fig. 1, pg. 4):
ACM8 ga-enye ma ọ bụ asatọ (8) mmepụta ike gbanwere, asatọ (8) ụdị akọrọ "C", ma ọ bụ ngwakọta ọ bụla nke ike gbanwere na ụdị "C", gbakwunyere asatọ (8) ntinye ike inyeaka. ACM8CB ga-enye mpụta ike ọkụ asatọ (8) gbanwere ma ọ bụ asatọ (8) ike inyeaka na-enweghị nkenke.
(a) Mbịpụta ike gbanwere:
Jikọọ ntinye adịghị mma (-) nke ngwaọrụ a na-akwado na njedebe akara [COM].
Maka ịrụ ọrụ nchekwa nke Fail-Safe jikọọ ndenye dị mma (+) nke ngwaọrụ a na-akwado na njedebe akara [NC].
Maka ịrụ ọrụ nchekwa nke Fail-Secure jikọọ ndenye dị mma (+) nke ngwaọrụ a na-akwado na njedebe akara [NO].
(b) Mpempe akwụkwọ “C”:
Mgbe a na-achọ ụdị ụdị "C" a ga-ewepụrịrị fuse (1-8) kwekọrọ (ACM8 naanị).
Jikọọ adịghị mma (-) nke ọkụ ọkụ ozugbo na ngwaọrụ mkpọchi. Jikọọ mma (+) nke ọkụ ọkụ na ọdụ akara akara [C].
Maka ịrụ ọrụ nchekwa nke Fail-Safe jikọọ ndenye dị mma (+) nke ngwaọrụ a na-akwado na njedebe akara [NC].
Maka ịrụ ọrụ nchekwa nke Fail-Secure jikọọ ndenye dị mma (+) nke ngwaọrụ a na-akwado na njedebe akara [NO].
(c) Ntinye ike inyeaka (anaghị agbanwe):
Jikọọ ntinye dị mma (+) nke ngwaọrụ a na-akwado na njedebe akara [C] yana adịghị mma (-) nke ngwaọrụ a na-agbanye na njedebe nke akara [COM]. Enwere ike iji mmepụta nye ike maka ndị na-agụ kaadị, igodo igodo wdg.
Nhọrọ ntinye ntinye (Fig. 1, pg. 4):
(a) Na-emepekarị mkpalite ntinye [NO]:
Ntinye 1-8 na-arụ ọrụ site na ntinye sink na-emeghe ma ọ bụ mepere emepe.
Jikọọ ngwaọrụ (ndị na-agụ kaadị, ahụigodo, arịrịọ ka ịpụ bọtịnụ wdg) na njedebe ndị akara [IN] na [GND].
(b) Mepee ihe ntinye ihe mkpokọ mkpokọta:
Jikọọ oghere njikwa oghere oghere onye na-anakọta sink positive (+) na ọdụ akara akara [IN] yana nke ọjọọ (-) na njedebe akara [GND].

Nhọrọ Interface Oti mkpu (Fig 3 ruo 7, pg. 6-7):
Ntinye [NC] emechiri emechi, nke na-emeghe [NO] ma ọ bụ ndenye ngbanwe polarity sitere na sekit mgbama FACP ga-akpalite nsonaazụ ahọpụtara. Iji mee ka Kwụsị FACP maka mmepụta, gbanyụọ mgba ọkụ kwekọrọ [SW1- SW8]. Iji gbanyụọ nkwụsị FACP maka mmepụta, gbanye mgba ọkụ kwekọrọ [SW1-SW8] GBANYE.
(a) Ntinye [NO] na-emepe nke ọma:
Maka nko-elu na-enweghị njide (Fig 4, pg. 6). Maka njigide nko-elu (Fig 5, pg. 6).
(b) Ntinye [NC] na-emechikarị:
Maka nko-elu na-enweghị njide (Fig 6, pg. 7). Maka njigide nko-elu (Fig 7, pg. 7).
(c) FACP mgbama mgbanye mgbanye mgbanye sekit:
Jikọọ ihe dị mma (+) na nke na-adịghị mma (-) site na mmepụta sekit mgbama FACP na njedebe akara [+ INP -].
Jikọọ FACP EOL na njedebe akara [+ RET -] (a na-ezo aka na polarity na ọnọdụ mkpu).
Jumper dị n'akụkụ TRG LED ga-ebipụ (Fig 1a, pg. 4).
Ụdị akọrọ FACP “C” mmepụta (Fig. 1b, pg. 4):
Jikọọ ngwaọrụ achọrọ ka ọ kpalite site na nsonaazụ kọntaktị akọrọ nke otu ahụ gaa na njedebe akara [NO] na [C] FACP maka mmepụta emepe emepe ma ọ bụ akara akara [NC] na [C] FACP maka mmepụta emechiri emechi.
Mara: Ngwaahịa a bụ UL Edepụtara Sub-Assembly maka ojiji ya na Altronix UL Edepụtara ọkụ ọkụ dị ka egosiri na ntuziaka nrụnye maka ọkụ ọkụ.

Ihe nchọpụta LED:

ACM8 na ACM8CB njikwa ike nnweta

Ikanam	ON	Gbanyụọ
LED 1-Ikanam 8 (Uhie)	Mbupute relay (s) na-enye ike.	Mgbasa ozi (s) arụpụtaghị ike.
Trg (Green)	Ntinye FACP kpalitere (ọnọdụ mkpu).	FACP nkịtị (ọnọdụ enweghị mkpu).

Tebụlụ njirimara njedebe:

ACM8 na ACM8CB njikwa ike nnweta

Akụkọ Mgbe Ebighị Ebi	Ọrụ/Nkọwa
- Ike +	Ntinye 12VDC ma ọ bụ 24VDC sitere na bọọdụ ọkọnọ ike.
- Njikwa +	Enwere ike ijikọ ọnụ ọnụ ndị a na ọkụ ọkụ UL edepụtara dị iche iji nye A ga-ewepụrịrị ike ọrụ dịpụrụ adịpụ maka ACM8/ACM8CB dumpers J1 na J2).
NA-akpali Ntinye 1 - Ntinye 8 na GND	Site na ntinye na-emepe emepe na/ma ọ bụ meghee ihe ntinye mmiri na-emepe emepe (rịọ ka ịpụ bọtịnụ, ọpụpụ par's, wdg).
Mpụta 1 - Mpụta 8 NC, C, NO, COM	12 ruo 24 volts AC/DC na-ebute nsonaazụ a na-achịkwa: Ọdịda-Nchekwa [NC nti (+) & COM adịghị mma (-)], Ọdịda-nchekwa [Onweghị ihe dị mma (+) & COM adịghị mma (—) 1, Ntinye aka [C positive (+) & COM Negative (—)] (Mgbe ị na-eji ike ọkụ AC adịghị mkpa ka a hụ ya), NC, C, NO na-aghọ ụdị "C" 5A/24VACNDC gosiri akọrọ mmepụta mgbe fuses bụ. wepụrụ (ACM8). Egosiri kọntaktị na steeti anaghị akpalite.
FACP INTERFACE T, + ntinye —	Ọkụ mkpu Interface na-akpalite ntinye sitere na FACP. Ntinye ntinye nwere ike imeghe nke ọma, na-emechikarị site na sekit mmepụta FACP (Fig 3 ruo 7, pgs. 6-29.
FACP INTERFACE NC, C, Mba	Ụdị kọntaktị relay nke “C” nwere akara 0 1A 28VDC maka mkpesa mkpu. (UL enyochabeghị mmepụta a).

Eserese ngwa a na-ahụkarị:

Ịdọ aka ná ntị: Iji belata ihe egwu nke ọkụ ma ọ bụ ujo eletrik, ekpughela akụkụ ahụ na mmiri ozuzo ma ọ bụ mmiri. Dochie fuses (ACM8 naanị) nwere otu ụdị na ọkwa, 3.5A/250V.

Eserese Nkọ:

Fig. 2 Nkonye nhọrọ na-eji ntinye ọkụ abụọ (2) dịpụrụ adịpụ:

Fig. 3 Ntinye ngbanwe nke polarity sitere na mmepụta sekit mgbama FACP (a na-ezo aka na polarity na ọnọdụ mkpu):

Fig. 4 Na-emepe emepe: ntinye FACP na-adịghị ejide ya:

Fig. 5 Mepee ngwa FACP Latching mkpalite yana ntọgharị (UL enyochabeghị mmepụta a):

Fig. 6 A na-emechikarị: ntinye FACP na-adịghị ejide ya:

Foto.

ndetu:

Altronix abụghị maka mmejọ ederede ọ bụla.
140 58th Street, Brooklyn, New York 11220 USA | ekwentị: 718-567-8181 | faksị: 718-567-9056
websaịtị: www.altronix.com | ozi-e: info@altronix.com | Akwụkwọ ikike ndụ
IIACM8/ACM8CB L14V
Ntuziaka nwụnye nke obere ọgbakọ ACM8/CB

Akwụkwọ / akụrụngwa

Altronix ACM8 Series UL Edepụtara Sub-Assembly Access Controllers [pdf] Akwụkwọ ntuziaka
ACM8, ACM8CB, ACM8 Series UL Edepụtara Sub-Agbakọ Nweta ikike njikwa ike, ACM8 Series, UL Edepụtara Sub-Assembly Access Controllers, Access Controllers, Power Controllers, Controllers.

Ntụaka

Akwụkwọ ntuziaka onye ọrụ