1. Okwu mmalite
The LASER TREE K1 MAX PLUS is a high-performance laser engraver and cutting machine designed for woodworking and various other materials. Featuring a powerful 60W+ optical power laser module and an expansive working area of 1000x1500mm, this machine offers precision and efficiency for both hobbyists and professionals. It supports popular software like LightBurn and LaserGRBL, providing versatile control over your projects.
2. Ozi nchekwa
Operating a laser engraver requires strict adherence to safety protocols to prevent injury. Please read and understand all safety warnings before operating the machine.
- Nchedo anya: Always wear the provided protective goggles (or equivalent certified laser safety glasses) when the laser is active. Never look directly at the laser beam.
- Igwe ikuku: Ensure adequate ventilation in your workspace to dissipate fumes and smoke generated during engraving and cutting.
- Nchekwa ọkụ: Keep a fire extinguisher nearby. Never leave the machine unattended during operation. Be aware of flammable materials.
- Ndakọrịta ihe: Only engrave or cut materials approved for laser processing. Avoid materials that produce toxic fumes or can catch fire easily.
- Nkwụsị ihe mberede: Mara onwe gị ebe na ọrụ nke bọtịnụ nkwụsị ihe mberede.
- Ụmụaka na anụ ụlọ: Debe ụmụaka na anụ ụlọ n'ebe igwe anaghị arụ ọrụ.
3. Ihe ngwugwu
Carefully unpack the box and verify that all components are present and undamaged. If any items are missing or damaged, please contact customer support.
- K1 MAX PLUS Engraving Machine Frame
- 60W Laser Head (LT-K60 Laser Module)
- Mgbapụta ikuku
- Protective Goggles
- Ihe nkwụnye ọkụ
- Obere AC
- Material Pack (for testing)
4. Nkọwapụta
| Njirimara | Nkọwapụta |
|---|---|
| Nọmba nlereanya | LT-K1-MAX-60W |
| Machine Module | LT-K1-MAX-PLUS-60W |
| Moder Laser | LT-K60 |
| Ike Laser Optical | 60W (Built-in 12pcs 5.5W beam compressed laser diodes) |
| Mpaghara ihe osise | 1000mm x 1500mm (39.37 x 59.06 inches) |
| Ike ntinye | 24V 10A |
| Working Focus | 40mm |
| Ngwa | Ihe osise & ịkpụ |
| Ngwanrọ nkwado | LightBurn & LaserGRBL |
| Engraving Precision | 0.01mm |
| Ọsọ ihe osise kacha | 20000mm/min |
| X-axis Design | Ihe mmịfe Linear |
| Ihe osise na-anọghị n'ịntanetị | Nkwado kaadị TF |
| Enyemaka ikuku | Akpaaka |
| Atụmatụ ndị ọzọ | Temperature Display & Alarm Function, Wire Harness Storage Clip, Red Cross Line Locating |
| Ibu ngwugwu | 32.0 n'arọ |
| Akụkụ ngwugwu | 100cm (L) x 70cm (W) x 20cm (H) |
5. Nhazi ntuziaka
Follow these steps to assemble and prepare your K1 MAX PLUS laser engraver:
- Iwepu: Carefully remove all components from the packaging. Keep the packaging materials in case of future transport or return.
- Mgbakọ Frame: Assemble the machine frame according to the detailed instructions provided in the separate assembly guide (not included here). Ensure all screws are tightened securely. The X-axis features a linear slide design for smooth movement.
- Laser Module Installation: Mount the 60W laser module (LT-K60) onto the gantry. Ensure it is firmly attached and aligned.
- Wiring: Connect all necessary cables, including the power cable, data cable, and air assist hose. Utilize the integrated wire harness storage clips to keep cables tidy and prevent interference with machine movement.
- Njikọ mgbapụta ikuku: Connect the air pump to the designated port on the laser module for automatic air assist functionality.
- Njikọ ike: Connect the power adapter to the machine and then to a suitable power outlet.
- Nwụnye ngwanrọ: Install your preferred laser control software (LightBurn or LaserGRBL) on your computer. Refer to the software's documentation for installation and setup.
6. Ntuziaka ọrụ
This section outlines the basic steps for operating your laser engraver. Always perform a small test on scrap material before starting a new project.
- Ike Na: Turn on the machine. The temperature display and alarm function will activate.
- Njikọ ngwanrọ: Launch LightBurn or LaserGRBL and connect to the laser engraver.
- Ndokwa ihe: Place your material on the working bed. Ensure it is flat and secured to prevent movement during operation.
- Ndozi anya: Adjust the laser focus to 40mm above the material surface. The red cross line locating feature can assist in precise positioning.
- Nhazi na-ebu ibu: Bujuo imewe gị file banye software.
- Ntọala oke: Set the appropriate laser power (20W, 40W, or 60W), speed, and passes based on your material and desired outcome. The 60W+ optical power laser module, with its 12pcs 5.5W beam compressed laser diodes, allows for efficient cutting and engraving.
- Enyemaka Ikuku: Enable automatic air assist for cleaner cuts and to reduce charring.
- Malite ọrụ: Initiate the engraving or cutting process from the software. Monitor the machine closely.
- Offline Engraving (Optional): For offline engraving, save your G-code file to a TF card and insert it into the machine's TF card slot. You can then operate the machine without a continuous computer connection.
6.1. Cutting Performance
The 60W+ laser module allows for impressive single-pass cutting capabilities:
- 20mm Basswood Plywood: 1 pass cutting (at 100% power)
- 40mm Pine Board: 1 pass cutting (at 100% power)
- 30mm Black Acrylic: 1 pass cutting (at 100% power)
7. Nlekọta
Mmezi mgbe niile na-eme ka arụmọrụ kachasị mma ma na-agbatị ndụ onye na-akpụ ihe laser gị.
- Na-ehicha oghere: Periodically clean the laser lens with a specialized lens cleaning solution and lint-free wipes. A dirty lens can reduce laser power and engraving quality.
- Cleaning the Work Area: Keep the working bed and surrounding areas free of debris, dust, and material scraps.
- mmanu mmanu: Lightly lubricate the linear rails and moving parts as recommended in the full product manual to ensure smooth operation.
- Njikwa USB: Regularly check the wire harness storage clips and ensure all cables are securely routed and not interfering with moving parts.
8. Nchọpụta nsogbu
If you encounter issues, try these common troubleshooting steps:
- Enweghị mmepụta laser: Check if the laser module is properly connected and powered. Verify software settings for laser power and enable status. Ensure the emergency stop button is not engaged.
- Ọdịmma ihe osise/ịkpụcha adịghị mma: Re-check the laser focus (should be 40mm). Adjust laser power and speed settings. Clean the laser lens. Ensure the material is flat and the machine is stable.
- Igwe anaghị aza: Verify USB or network connection to your computer. Restart the software and the machine. Check power connections.
- Nsogbu Mmegharị: Inspect the X-axis linear slide and belts for any obstructions or damage. Ensure all mechanical components are properly assembled and tightened.
- Oti mkpu okpomọkụ: If the temperature alarm activates, stop operation immediately. Allow the machine to cool down and ensure proper ventilation.
9. Ndụmọdụ onye ọrụ
- Nnwale ihe: Always perform small test engravings or cuts on a scrap piece of your material to dial in the optimal power and speed settings before starting your main project.
- Software Familiarization: Spend time learning the features of LightBurn or LaserGRBL. Many tutorials are available online that can significantly enhance your workflow and results.
- Ụlọ ọrụ oghere ọrụ: A clean and organized workspace not only improves safety but also helps in maintaining the machine and achieving better results.
10. Akwụkwọ ikike na nkwado
The LASER TREE K1 MAX PLUS is backed by the manufacturer's warranty. For specific warranty details, please refer to the official product documentation or contact the Laser Tree Official Store directly. For technical support, troubleshooting assistance, or any questions regarding your machine, please reach out to the seller's customer service.
