XIGMATEK Connect Pro 360 All-in-one Liquid Cooler User Manual

1. Okwu mmalite

Thank you for choosing the XIGMATEK Connect Pro 360 All-in-one Liquid Cooler. This high-performance CPU cooling solution features a 7-inch magnetic display LCD screen, vibrant ARGB lighting, and is designed to provide exceptional heat dissipation for optimal CPU performance. The integrated LCD screen supports display duplication or extension modes for Windows 10 and 11, offering enhanced functionality and customization.

This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure you get the best experience from your product. Please read this manual thoroughly before installation and keep it for future reference.

2. Ihe ngwugwu

Please check the package contents to ensure all items are present and in good condition:

• Connect Pro 360 Radiator with integrated fans
• CPU Pump Head with Magnetic LCD Module
• Mounting Brackets for Intel and AMD Sockets
• Backplates and Screws for various CPU sockets
• Thermal Tapawa
• Obere ARGB LED Controller
• Type-C Cable for LCD Module
• Akwụkwọ ntuziaka onye ọrụ

3. Nkọwapụta

4. Ntuziaka nwụnye

Before you begin, ensure your system is powered off and unplugged from the wall outlet. Refer to your motherboard manual for specific CPU socket information.

4.1. Kwadebe oghere CPU

1. Identify your CPU socket type (Intel LGA or AMD AM).
2. Attach the appropriate backplate to the rear of your motherboard if required for your socket.
3. Install the correct mounting standoffs onto the motherboard around the CPU socket.

4.2. Wụnye Radiator na Fans

1. Chọpụta ebe kacha mma maka radiator 360mm n'ime akpa PC gị (dịka ọmụmaatụ, n'elu, n'ihu).
2. Secure the radiator to the case using the provided screws. Ensure adequate airflow.
3. The fans are pre-installed on the radiator. If not, attach them to the radiator, ensuring the airflow direction is correct for your case's cooling strategy.

4.3. Mount the Pump Head

1. Apply a thin, even layer of the included thermal paste onto the center of your CPU's integrated heat spreader (IHS).
2. Carefully place the pump head onto the CPU, aligning it with the mounting standoffs.
3. Secure the pump head with the appropriate thumb screws or nuts, tightening them in a diagonal pattern until snug. Do not overtighten.

4.4. Jikọọ eriri

1. Pump Power: Connect the pump's 4-pin connector to the CPU_FAN or AIO_PUMP header on your motherboard.
2. Ike ofufe: Connect the radiator fans' 4-pin PWM connectors to available fan headers on your motherboard or to the included Mini ARGB LED Controller.
3. Ọkụ ARGB: Connect the 5V-3pin ARGB connectors from the fans and pump to the Mini ARGB LED Controller. Then, connect the controller's 5V-3pin ARGB cable to a compatible ARGB header on your motherboard (if you wish to control lighting via motherboard software) or use the controller's built-in modes. Power the controller via its SATA power connector from your PSU.
4. LCD Module: Connect the 7-inch magnetic LCD module to an available USB Type-C port on your motherboard or directly to your GPU (if it has a Type-C output) using the provided Type-C cable.

4.5. Software Installation for LCD Module

For the 7-inch LCD module to function as a secondary monitor (duplicate or extend mode), a software driver is required. Please visit the official XIGMATEK website or the product page to download the latest display software/driver for Windows 10 or 11. Follow the on-screen instructions for installation.

5. Ọrụ

5.1. Ike izizi

After completing the installation and software setup, power on your PC. The fans and pump should start operating, and the ARGB lighting should illuminate. The 7-inch LCD module should display content once the necessary drivers are installed and configured.

5.2. LCD Module Functionality

• Ụdị ngosi: The 7-inch LCD module supports display duplication (mirroring your main display) or extension mode (acting as a secondary monitor) for Windows 10 and 11. These settings can be configured through your operating system's display settings.
• Magnetic Removable Design: The LCD module is magnetically attached to the pump head, allowing for easy removal and rotation to achieve your desired viewakụkụ n'akuku.

5.3. Njikwa ọkụ ARGB

The ARGB lighting for the fans and pump can be controlled in two ways:

• Ngwa ngwa motherboard: If connected to a compatible 5V-3pin ARGB header on your motherboard, you can use your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, ASRock Polychrome Sync) to synchronize and customize lighting effects.
• Mini ARGB LED Controller: The included controller provides various pre-set lighting modes and colors. Use the buttons on the controller to cycle through effects, adjust brightness, and change speed.

5.4. Fan and Pump Speed Control

The fan and pump speeds are controlled via PWM (Pulse Width Modulation). You can manage these speeds through your motherboard's BIOS/UEFI settings or dedicated fan control software provided by your motherboard manufacturer. Adjusting these settings can optimize cooling performance and noise levels.

6. Nlekọta

Nlekọta oge niile na-enyere aka hụ na ịdị ogologo ndụ na arụmọrụ kacha mma nke igwe nju oyi gị.

• Nhicha uzuzu: Kwa oge na-asachapụ ntù radiator na agụba fan ka ọ ghara ime ka uzuzu wuo, nke nwere ike igbochi ikuku na-erute ma belata arụmọrụ jụrụ oyi. Jiri ikuku abịakọrọ ma ọ bụ ahịhịa dị nro.
• Tube and Connection Inspection: Visually inspect the tubes and connections for any signs of leaks, kinks, or damage. Address any issues promptly.
• Tapawa okpomọkụ: While not frequently required, if you ever remove the pump head from the CPU, it is recommended to clean off the old thermal paste and apply a fresh layer before reinstallation.

7. Nchọpụta nsogbu

If you encounter issues with your XIGMATEK Connect Pro 360, refer to the following common problems and solutions:

• No Power to Fans/Pump:
  • Check all power connections (4-pin pump, 4-pin fans, SATA for ARGB controller) to ensure they are securely plugged into the motherboard and power supply.
  • Verify that the CPU_FAN/AIO_PUMP header is enabled in your motherboard's BIOS.
• No ARGB Lighting:
  • Ensure the 5V-3pin ARGB connectors are correctly attached to the ARGB controller or motherboard header.
  • Confirm the ARGB controller is receiving SATA power.
  • Ọ bụrụ na ị na-eji ngwanrọ motherboard, hụ na etinyere ya ma hazie ya nke ọma.
• LCD Module Not Displaying:
  • Check the Type-C cable connection to both the LCD module and your PC/GPU.
  • Ensure the display software/driver is correctly installed and updated.
  • Verify display settings in Windows (Display Settings) to ensure the secondary monitor is detected and configured for duplication or extension.
  • Try a different USB Type-C port.
• Arụmọrụ oyi na-adịghị mma:
  • Ensure the pump head is securely mounted to the CPU with adequate thermal paste.
  • Check for dust buildup on the radiator and fans, and clean if necessary.
  • Verify that fans are spinning at appropriate speeds (check BIOS/software).
  • Gbaa mbọ hụ na ikuku ikuku dị n'ime akpa PC gị.

8. Ndụmọdụ onye ọrụ

Maximize your experience with the Connect Pro 360 with these helpful tips:

• Optimize Fan Curves: Adjust fan curves in your motherboard's BIOS or software to balance cooling performance and noise levels according to your usage (e.g., quiet for browsing, performance for gaming).
• Customize LCD Display: Experiment with different content on the 7-inch LCD screen. It can display system monitoring data, custom images, GIFs, or even act as a small secondary screen for chat applications or media controls.
• ARGB Synchronization: If your motherboard supports ARGB synchronization, connect all ARGB components (fans, pump, other case lighting) to the motherboard's ARGB headers to create a unified lighting theme.
• Njikwa USB: Take time to manage the cables neatly. This not only improves aesthetics but also enhances airflow within your case, contributing to better cooling.

9. Akwụkwọ ikike na nkwado

XIGMATEK products are manufactured to the highest quality standards. For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official XIGMATEK websaịtị. Biko dowe ihe akaebe nke ịzụrụ ihe maka akwụkwọ ikike.