1. Okwu mmalite
The Godox TR TTL Hot Shoe Riser is designed to elevate your camera's flash unit, providing greater flexibility for flash positioning and reducing red-eye or harsh shadows. It features a 0-90° tilt adjustment for both direct and bounce flash photography, ensuring optimal lighting while maintaining lens compatibility and image clarity.
This riser is compatible with various camera systems and flash units, supporting TTL (Through-The-Lens) and HSS (High-Speed Sync) functionalities.
The TR TTL Hot Shoe Riser is compatible with Canon E-TTL II, Nikon i-TTL, Sony, Fuji, OM System, Panasonic, and other systems supporting TTL and HSS. It is ideal for use with Godox flash units weighing under 300g. Note: Compatible with iT30Pro/iT20 /iT22/ iM30/iM20 (Only in M mode when using with iM series). TTL and HSS are not supported when used with single-contact flash units.
2. Ngwaahịa gafereview
The Godox TR Hot Shoe Riser is a compact and lightweight accessory that provides an elevated and adjustable mounting point for your external flash unit. Its robust design ensures a secure connection between your camera and flash.
N'ihu na akụkụ view of the Godox TR TTL Hot Shoe Riser.
3. Ntọala na nwụnye
Follow these steps to properly install the Godox TR Hot Shoe Riser and your flash unit:
- Mount the Riser to Camera: Slide the base of the TR Hot Shoe Riser into your camera's hot shoe mount. Ensure it is fully seated and then tighten the locking mechanism (if present on your camera's hot shoe or the riser itself) to secure it firmly.
- Mount Flash to Riser: Slide your compatible flash unit (e.g., Godox iT20, iT22, iT30Pro) onto the hot shoe of the TR Riser. Secure the flash unit by tightening its locking mechanism.
- Lelee njikọ: Verify that both the riser and the flash unit are securely attached and do not wobble.
Example of the Godox TR Hot Shoe Riser with an iT30Pro flash mounted on a camera, demonstrating its elevated position and tilt capability.
Examples of the Godox TR Hot Shoe Riser with iT20 and iT22 flashes mounted on cameras, illustrating the tilt adjustment.
4. Ọrụ
The primary function of the TR Hot Shoe Riser is its 0-90° tilt adjustment, which allows for versatile flash positioning:
- Direct Flash: For standard, forward-facing flash illumination.
- Bounce Flash: Tilt the flash upwards (e.g., towards a ceiling) to soften shadows and create more natural-looking light. The riser's height helps ensure the flash clears the lens, preventing vignetting or shadows cast by the lens itself.
To adjust the tilt, gently push or pull the flash unit mounted on the riser to the desired angle. The mechanism is designed to hold the flash securely at various positions within the 0-90° range.
The TR riser allows 0-90° tilt for both direct and bounce flash, and its height ensures lens compatibility while preserving image edge clarity.
5. Ndụmọdụ onye ọrụ
- Preventing Lens Shadows: The riser's elevated design helps prevent the flash from casting shadows from longer lenses, especially in portrait orientation.
- Bounce Flash Effectiveness: Utilize the 0-90° tilt to bounce flash off ceilings or walls for softer, more diffused lighting. Experiment with different angles to achieve desired effects.
- Addressing Darker Bottom Half in Longer Shots: For longer shots taken with a flash, a darker bottom half of the photo may occur. Using the Hot Shoe Riser is recommended to mitigate this issue by elevating the flash.
6. Nkọwapụta
| Njirimara | Nkọwa |
|---|---|
| Nọmba nlereanya | TR-C/N/S/F/O |
| Ụdị dakọtara | Godox (Compatible with Canon, Nikon, Sony, Fuji, Olympus, OM System, Panasonic) |
| Ụdị dakọtara | iT20, iT22, iT30Pro, iM30, iM20 (iM series only in M mode) |
| Ndozi atụgharị | 0-90° |
| Ibu | 26.5g / 0.585 n'arọ |
| Akụkụ (W x H x D) | 32.42mm (1.28 in) x 36.3mm (1.43 in) x 40.66mm (1.60 in) |
| Mmalite | Mainland China |
| Kemịkalụ dị elu | Ọ dịghị |
Detailed measurements and weight of the Godox TR Hot Shoe Riser.
7. Nlekọta
To ensure the longevity and optimal performance of your Godox TR Hot Shoe Riser, follow these maintenance guidelines:
- Nhicha: Use a soft, dry cloth to wipe the surface of the riser. Avoid using harsh chemicals or abrasive materials, which can damage the finish or electronic contacts.
- Nchekwa: Store the riser in a cool, dry place away from direct sunlight and extreme temperatures. When not in use, it is advisable to detach it from both the camera and the flash unit to prevent unnecessary stress on the hot shoe mounts.
- Ebe ana-akpọtụrụ: Keep the hot shoe contact points clean and free of dust or debris to ensure reliable communication between the camera and flash.
8. Nchọpụta nsogbu
If you encounter issues with your Godox TR Hot Shoe Riser, consider the following common solutions:
- Flash anaghị agba ọkụ:
- Ensure the riser is securely mounted to the camera's hot shoe and the flash is securely mounted to the riser.
- Check that the flash unit is powered on and its settings are appropriate for your camera.
- Verify that the camera's hot shoe contacts and the riser's contacts are clean and free of obstruction.
- Njikọ rụrụ arụ:
- Re-seat the riser on the camera and the flash on the riser, ensuring all locking mechanisms are fully tightened.
- Inspect the hot shoe mounts for any physical damage or wear that might prevent a secure fit.
- Inconsistent TTL/HSS:
- Confirm that your flash unit and camera system are fully compatible with TTL and HSS when used with the riser.
- As noted in the introduction, TTL and HSS are not supported when used with single-contact flash units.
9. Akwụkwọ ikike na nkwado
Maka ozi akwụkwọ ikike, nkwado teknụzụ, ma ọ bụ ajụjụ ọrụ, biko rụtụ aka na Godox gọọmentị website or contact your authorized Godox dealer. Keep your purchase receipt as proof of purchase for any warranty claims.
