BOYA BOYALINK 3 Professional Mini Wireless Lavalier Microphone

1. Okwu mmalite

The BOYA BOYALINK 3 is a 2.4 GHz ultra-mini wireless microphone system designed for professional audio recording. It features industry-leading AI noise cancellation and offers remarkable flexibility for various recording scenarios. Each transmitter can pair with up to 4 receivers simultaneously, making it ideal for content creation, live streaming, vlogging, mobile journalism, and more.

The system includes USB-C and Lightning adapters, along with a 3.5 mm TRS to TRS audio cable, ensuring broad compatibility with smartphones, tablets, computers, cameras, and other devices. The receiver is also equipped with a USB-C charging port that supports simultaneous operation and charging of the receiver and external devices. The included charging case allows for convenient recharging of the transmitter and receiver on the go, enhancing portability.

2. Ihe ngwugwu

The BOYA BOYALINK 3 system is available in several configurations. Please check your specific package for exact contents. Common components include:

BOYALINK 3-01 (2 Transmitters + 1 Receiver + Charging Case)

• Onye na -ebugharị x 2
• Onye nnata x 1
• Nchaji Okwu x 1
• Ihe nkwụnye USB-C x 1
• Lightning Adapter x 1
• Igwe ndọta x2
• Magnetic Clip x 2
• Ihe mkpuchi mkpuchi ajị anụ x 2
• 3.5 mm TRS to TRS Audio Cable x 1
• USB-C gaa na USB-A Data Cable x 1
• Obere obere akpa x 1

BOYALINK 3-02 (2 Transmitters + 1 Receiver + Charging Case)

• Onye na -ebugharị x 2
• Onye nnata x 1
• Nchaji Okwu x 1
• Ihe nkwụnye USB-C x 1
• Lightning Adapter x 1
• Igwe ndọta x2
• Magnetic Clip x 2
• Ihe mkpuchi mkpuchi ajị anụ x 2
• 3.5 mm TRS to TRS Audio Cable x 1
• USB-C gaa na USB-A Data Cable x 1
• Obere obere akpa x 1

BOYALINK 3-03 (2 Transmitters + 1 Receiver, without Charging Case)

• Onye na -ebugharị x 2
• Onye nnata x 1
• Ihe nkwụnye USB-C x 1
• Lightning Adapter x 1
• Igwe ndọta x2
• Magnetic Clip x 2
• Ihe mkpuchi mkpuchi ajị anụ x 2
• 3.5 mm TRS to TRS Audio Cable x 1
• USB-C gaa na USB-A Data Cable x 1
• Obere obere akpa x 1
• Igwe nchaji magnetik x 2

BOYALINK 3-04 (1 Transmitter + 1 Receiver, without Charging Case)

• Onye na -ebugharị x 1
• Onye nnata x 1
• Ihe nkwụnye USB-C x 1
• Lightning Adapter x 1
• Igwe ndọta x1
• Magnetic Clip x 1
• Ihe mkpuchi mkpuchi ajị anụ x 1
• 3.5 mm TRS to TRS Audio Cable x 1
• USB-C gaa na USB-A Data Cable x 1
• Obere obere akpa x 1
• Igwe nchaji magnetik x 1

3. Ntuziaka Nhazi

3.1 Nchaji izizi

1. For models with a charging case, place the transmitters (TX) and receiver (RX) into the charging case. Connect the charging case to a power source using the provided USB-C cable. The indicator lights on the case will show charging status.
2. For models without a charging case, connect the transmitters and receiver directly to a USB power source using the magnetic charging cables.
3. Ensure all units are fully charged before first use for optimal battery life.

3.2 Jikọọ onye nnata

The BOYALINK 3 receiver offers versatile connectivity:

• For iPhone (Lightning port): Attach the Lightning adapter to the receiver and plug it into your iPhone's Lightning port.
• For Android/USB-C Devices: Attach the USB-C adapter to the receiver and plug it into your device's USB-C port.
• For Cameras/Laptops/PCs (3.5mm TRS): Use the provided 3.5mm TRS to TRS audio cable to connect the receiver to your camera's microphone input or computer's audio input.

3.3 Yiri nnyefe

1. Attach the magnetic clip to the back of the transmitter.
2. Clip the transmitter onto your clothing, ensuring the microphone is facing towards your mouth for optimal sound capture.
3. For outdoor use or windy conditions, attach the fur windshield to the transmitter to reduce wind noise.

3.4 Njikọta

The transmitters and receiver should automatically pair when powered on and in close proximity. The system supports pairing up to 2 wireless microphones (transmitters) with 8 devices (receivers) for multi-camera and cross-platform live streaming setups.

4. Ntuziaka ọrụ

4.1 Gbanyụọ ma ọ bụ gbanyụọ

• Ntughari (TX): Press and hold the power button for a few seconds to turn on or off.
• Onye nnata (RX): The receiver typically powers on automatically when connected to a device.

4.2 Mbelata mkpọtụ AI

The BOYALINK 3 features advanced AI noise cancellation. Activate this feature to significantly reduce ambient noise, ensuring clear audio in challenging environments. Refer to the BOYA Central app for specific controls.

4.3 Double-Tap Phone Control

For cell phones that allow using volume keys as camera shutter buttons, the BOYALINK 3 transmitters can be configured for double-tap control. This allows you to start/stop recording or take photos directly from the transmitter.

4.4 Nlekota Oge N'ezie

Connect headphones to the receiver's 3.5mm output (if available on your specific receiver model) to monitor your audio in real-time during recording. This helps ensure optimal sound quality.

4.5 Smart Control with BOYA Central App

For advanced control, download the BOYA Central app. This app allows you to fine-tune EQ settings, adjust gain levels, switch noise cancellation modes, and update firmware for total control over your sound.

4.6 Nchaji mgbe a na-edekọ

The receiver's USB-C port supports simultaneous charging and use. This allows for extended recording sessions, live streams, and content creation without interruption.

5. Atụmatụ igodo

• Ultra-Mini 2.4 GHz Wireless System: Compact and lightweight design for maximum portability.
• Industry-Leading AI Noise Reduction: Effectively cancels out ambient noise for crystal-clear recordings.
• Oke nnyefe agbatịkwuru: Barrier-free transmission up to 984 feet (300m) in open areas, and stable transmission up to 197 feet (60m) with obstacles.
• Ọdịda Ọkachamara: Captures high-fidelity sound with 48kHz/24bit sampling rate, >85dB Signal-to-Noise Ratio (SNR), 120dB Sound Pressure Level (SPL), and a 6mm Hi-Fi Mic with less than 0.1% distortion.
• Ndụ batrị ụbọchị niile: Up to 6 hours of working time for transmitters, extended to 30 hours with the charging case (for models including the case).
• 3-in-1 Full Compatibility: Includes Lightning, USB Type-C, and 3.5mm TRS adapters for wide device compatibility.
• Multi-Device Sync: Supports pairing up to 2 transmitters with 8 receivers for complex recording setups.
• Njikwa smart: Fine-tune settings like EQ, gain, and noise cancellation via the BOYA Central app.
• Double-Tap Phone Control: Conveniently control recording on compatible smartphones.

6. Nlekọta

• Nhicha: Use a soft, dry cloth to clean the devices. Avoid using harsh chemicals or abrasive materials.
• Nchekwa: Store the microphone system in a cool, dry place, away from direct sunlight and extreme temperatures. When not in use for extended periods, store the transmitters and receiver in the charging case (if applicable) or a protective pouch.
• Nlekọta batrị: To prolong battery life, avoid fully discharging the batteries frequently. Recharge them regularly, even if not in constant use.
• Mkpughe mmiri: The devices are not waterproof. Avoid exposure to water or high humidity.

7. Nchọpụta nsogbu

Enweghị ogo ụda/adịghị mma:

• Ensure both transmitter and receiver are powered on and properly paired.
• Lelee ọkwa batrị nke nkeji abụọ ahụ.
• Verify that the receiver is correctly connected to your recording device (e.g., firmly plugged into the microphone input).
• Adjust the gain settings via the BOYA Central app.
• Ensure the microphone on the transmitter is not obstructed and is positioned correctly.
• Check for interference from other 2.4 GHz devices.

Device Not Connecting/Recognized:

• Ensure the correct adapter (Lightning, USB-C, or 3.5mm TRS) is securely attached to the receiver and your device.
• Restart both the microphone system and your recording device.
• Lelee ntọala ntinye ọdịyo nke ngwaọrụ gị iji hụ na ahọpụtara igwe okwu mpụga.
• For smartphones, ensure the device's operating system is up to date.

Short Transmission Range:

• Ensure there are no significant physical obstructions between the transmitter and receiver.
• Avoid environments with high levels of wireless interference.
• Maintain line of sight between the units if possible.

8. Nkọwapụta

9. Ndụmọdụ onye ọrụ

• Lelee ndakọrịta ngwaọrụ: Always ensure your specific smartphone model (e.g., iPhone 14 Pro Max) is compatible with the Lightning or USB-C adapter provided. While generally compatible, some older or very new devices might require specific OS versions or settings.
• Nyochaa ọdịyo: Use headphones for real-time audio monitoring to catch any issues during recording, especially in dynamic environments.
• Jiri ngwa ahụ: Download the BOYA Central app to unlock advanced features like EQ adjustments and fine-tuning noise cancellation for different scenarios.
• Ebe echekwara When clipping the transmitter, ensure it's securely attached and the microphone is positioned optimally for your voice, typically 6-8 inches from your mouth.

10. Akwụkwọ ikike na nkwado

For warranty information, technical support, or service inquiries, please refer to the official BOYA webma ọ bụ kpọtụrụ onye na-ere ahịa gị ikike. Debe risit ịzụrụ ihe gị dị ka ihe akaebe nke ịzụrụ ihe maka nkwupụta nkwa.

11. Video ngwaahịa