Akko 5108B Plus Joy of Life Mechanical Keyboard User Manual

1. Okwu mmalite

Thank you for choosing the Akko 5108B Plus Joy of Life Mechanical Keyboard. This full-size (108-key) keyboard features a unique 'Joy of Life' aesthetic with PBT dye-sublimation keycaps, Akko V3 Piano Pro switches, vibrant RGB backlighting, and versatile tri-mode connectivity (Wired, 2.4G Wireless, Bluetooth). This manual provides essential information for setting up, operating, maintaining, and troubleshooting your keyboard to ensure optimal performance and longevity.

2. Ihe ngwugwu

Biko lelee ngwungwu maka ihe ndị a:

• Akko 5108B Plus Joy of Life Mechanical Keyboard
• USB Type-C USB
• 2.4G ikuku ikuku
• Onye na-adọkpụ igodo
• Gbanwee Puller
• Akwụkwọ ntuziaka (akwụkwọ a)

3. Ntọala na Njikọ

3.1 Nchaji izizi

Before first use, it is recommended to fully charge the keyboard. Connect the USB Type-C cable to the keyboard's port and the other end to a powered USB port on your computer or a USB wall adapter. The keyboard has a built-in 3000mAh battery.

3.2 Jikọọ ahụigodo

The Akko 5108B Plus supports three connection modes:

• Ọnọdụ Wired:
  1. Ensure the mode switch on the keyboard is set to 'Wired' (usually indicated by a cable icon or 'USB').
  2. Connect the USB Type-C cable from the keyboard to your computer's USB port.
  3. The keyboard should be recognized automatically by your operating system.
• Ọnọdụ ikuku 2.4G:
  1. Locate the 2.4G wireless receiver (dongle) in the package.
  2. Tinye ihe nnata 2.4G n'ọdụ ụgbọ mmiri USB dị na kọmputa gị.
  3. Set the keyboard's mode switch to '2.4G' (often indicated by a wireless icon).
  4. The keyboard should connect automatically. If not, press Fn + F1 (or the designated pairing key) to initiate pairing.
• Ọnọdụ Bluetooth:

  The keyboard supports Bluetooth 5.0 and can connect to multiple devices.

  1. Set the keyboard's mode switch to 'Bluetooth' (indicated by a Bluetooth icon).
  2. On your computer or device (Windows, macOS, iOS, Android), open Bluetooth settings.
  3. To enter pairing mode on the keyboard, press and hold Fn + E/R/T/Y/U (for Bluetooth device 1-5 respectively) for 3-5 seconds until the indicator light flashes rapidly.
  4. Select 'Akko 5108B Plus' from the list of available Bluetooth devices on your computer/device and follow any on-screen prompts to complete pairing.
  5. To switch between paired Bluetooth devices, press Fn + E/R/T/Y/U briefly.

3.3 Software Installation (Akko Cloud Driver)

For advanced customization of RGB lighting, macros, and key remapping, download and install the Akko Cloud Driver software from the official Akko websaịtị. Ngwanrọ a dakọtara na sistemụ arụmọrụ Windows.

4. Ntuziaka ọrụ

4.1 RGB njikwa ọkụ azụ

The keyboard features customizable RGB backlighting with over 16 million color options per key. You can control the lighting effects via:

• Igwe ọkụ ahụigodo: Use Fn + various keys (refer to the keyboard's specific key combinations, often indicated on the keycaps or in the software manual) to cycle through lighting modes, adjust brightness, and change animation speed.
• Akko Cloud Driver: For full customization, including per-key lighting, custom effects, and synchronization, use the Akko Cloud Driver software. This allows for precise control over colors, patterns, and speeds.

4.2 Macro Mmemme

The Akko 5108B Plus supports Akko Macro V1.0 for creating custom macros. Use the Akko Cloud Driver software to record and assign complex key sequences to specific keys, enhancing productivity and gaming performance.

4.3 N-Key Rollover (NKRO)

The keyboard supports N-Key Rollover, meaning every key press is registered independently, preventing ghosting or missed key presses even when multiple keys are pressed simultaneously. This feature is active in wired and 2.4G modes.

4.4 Adjustable Height

The keyboard is designed with a tilting stand offering 3 levels of height adjustment. This allows you to customize the typing angle for improved ergonomics and comfort.

5. Nlekọta

5.1 Ihicha ahụigodo

• Kwụpụ kiiboodu site na isi mmalite ike niile tupu ihicha.
• Jiri akwa dị nro na-enweghị ntụpọ dampened with water or a mild cleaning solution to wipe down the keycaps and frame.
• Maka uzuzu na ihe mkpofu dị n'etiti ihe mkpuchi igodo, jiri ikuku a kpọchiri akpọchi ma ọ bụ obere ahịhịa.
• To deep clean keycaps, use the provided keycap puller to remove them. Wash keycaps with mild soap and water, rinse thoroughly, and ensure they are completely dry before reattaching.

5.2 Mgbanwe Mgbanwe Na-ekpo Ọkụ

The Akko 5108B Plus features hot-swappable sockets, allowing you to change switches without soldering. It supports both 3-pin and 5-pin mechanical switches.

1. Using the provided switch puller, carefully grip the switch from the top and bottom clips.
2. Jiri nwayọ dọrọ mgbanaka ahụ kwụ ọtọ ka iwepu ya na PCB.
3. Dozie ntụtụ nke mgba ọkụ ọhụrụ ahụ na oghere dị na PCB. Gbaa mbọ hụ na ntụtụ ahụ kwụ ọtọ ka ịzena-ehulata.
4. Press the new switch firmly into place until it clicks. Test the key to ensure it functions correctly.

5.3 Nlekọta batrị

• Zere ikpughe ahụigodo na oke okpomọkụ.
• Do not fully discharge the battery frequently; recharge when the battery level is low.
• If storing the keyboard for an extended period, charge it to about 50% to prolong battery life.

6. Nchọpụta nsogbu

6.1 Ahụigodo anaghị azaghachi

• Ọnọdụ Wired: Hụ na eriri USB-C ejikọtara ya nke ọma na ahụigodo na kọmputa ahụ. Nwaa ọdụ USB ma ọ bụ eriri USB dị iche.
• Ọnọdụ ikuku 2.4G: Check if the 2.4G receiver is properly plugged in. Ensure the keyboard is in 2.4G mode. Try re-pairing by pressing Fn + F1.
• Ọnọdụ Bluetooth: Verify the keyboard is in Bluetooth mode and paired correctly. Re-pair if necessary (Fn + E/R/T/Y/U). Ensure your device's Bluetooth is enabled.
• Check the keyboard's battery level and charge if low.

Ọkụ azụ RGB 6.2 anaghị arụ ọrụ/Ezighi ezi

• Ensure the RGB lighting is not turned off via hotkeys (e.g., Fn + L-Alt).
• Adjust brightness using Fn + Up/Down arrow keys.
• If using Akko Cloud Driver, ensure the software is running and settings are applied.
• Try resetting the keyboard to factory defaults (refer to the Akko Cloud Driver manual for specific instructions).

6.3 Igodo anaghị edebanye aha ma ọ bụ dee ugboro abụọ

• This could indicate a faulty switch. Use the switch puller to remove the problematic switch and replace it with a new one.
• Ensure the switch is fully seated in the socket.
• Clean any debris around the switch socket.

6.4 Batrị anaghị achaji

• Ensure the USB-C cable is functional and connected to a working power source.
• Gbalịa eriri USB-C dị iche ma ọ bụ ọdụ ụgbọ mmiri.
• Verify the keyboard's power switch is in the 'On' position (if applicable for charging).

7. Nkọwapụta

8. Ndụmọdụ onye ọrụ

• Experiment with RGB: Take time to explore the various RGB lighting effects and customization options available through the Akko Cloud Driver to personalize your setup.
• arụmọrụ nnukwu: Utilize the macro programming feature for repetitive tasks in work or complex combos in gaming to significantly boost your efficiency.
• Ndozi Ergonomic: Don't forget to adjust the keyboard's height using the built-in stand to find the most comfortable typing angle for long sessions.
• Nhazi Mgbanwe: If you desire a different typing feel, take advantage of the hot-swappable sockets to easily try out various 3-pin or 5-pin mechanical switches without needing to solder.

9. Akwụkwọ ikike na nkwado

For warranty information, technical support, or service inquiries, please contact the official Akko customer support or refer to the warranty card included with your product. Keep your proof of purchase for warranty claims.