Ntuziaka maka ịwụnye mgbidi TV KALOC UT75 zuru oke

1. Okwu mmalite

Thank you for choosing the KALOC UT75 Full Motion TV Wall Mount. This manual provides essential information for the safe and proper installation, operation, and maintenance of your new TV mount. The UT75 is designed to securely hold 55-75 inch LCD/LED televisions, offering full motion capabilities including tilt and swivel for optimal viewing angles. Please read this manual thoroughly before installation and keep it for future reference.

2. Ozi nchekwa

Ịdọ aka ná ntị: Failure to read and follow all instructions may result in personal injury, property damage, or voiding of your warranty. Improper installation can lead to serious injury or death.

• This product is intended for installation by qualified personnel only. If you are unsure about the installation process, consult a professional installer.
• Ensure the mounting surface (wall) can safely support the combined weight of the mount and your TV.
• Do not exceed the maximum weight capacity of 40kg (88lbs).
• Verify your TV's VESA pattern is compatible with the mount (200x200mm to 600x400mm).
• Use only the provided mounting hardware. If any parts are missing or damaged, contact KALOC support immediately.
• Debe ụmụaka na anụ ụlọ n'oge echichi.
• Avoid installing the mount near heat sources, direct sunlight, or areas with high humidity.
• Periodically check all screws and connections to ensure they remain secure.

3. Ihe ngwugwu

Please check to ensure all components are present and undamaged before beginning installation. If anything is missing or broken, please contact customer support.

• KALOC UT75 TV Wall Mount Assembly
• TV Mounting Brackets (2 pieces)
• Efere mgbidi
• Mounting Hardware Kit (screws, anchors, washers, spacers for various TV models and wall types)
• Akwụkwọ ntuziaka (akwụkwọ a)

4. Nkọwapụta

5. Nwụnye na Ntọala

Before you begin, ensure you have the necessary tools (e.g., drill, stud finder, level, screwdriver, wrench) and understand the type of wall you are mounting to (wood stud, concrete, brick). It is highly recommended to have two people for installation.

5.1. Nlebanya mbụ etinyere

1. Check Wall Strength: Confirm your wall can support the combined weight of your TV and the mount.
2. Locate Studs/Solid Points: Use a stud finder to locate wood studs or ensure you are drilling into solid concrete/brick.
3. Determine Mounting Height: Decide on the desired height for your TV. The center of the TV should ideally be at eye level when seated.

5.2. Attaching TV Brackets to TV

1. Jiri nlezianya dobe ihu TV gị n'elu ala dị nro ma dị ọcha iji gbochie ncha.
2. Chọpụta oghere VESA na-agbago n'azụ TV gị.
3. Họrọ skru, washers, na spacers kwesịrị ekwesị site na ngwa ngwa nke dabara na oghere mgbago TV gị.
4. Attach the two vertical TV brackets to the back of your TV using the selected hardware. Ensure they are securely fastened and evenly spaced.

5.3. Mounting the Wall Plate

1. Hold the wall plate against the wall at your desired mounting height. Use a level to ensure it is perfectly horizontal.
2. Mark the drilling locations through the holes on the wall plate.
3. Drill pilot holes at the marked locations. For wood studs, drill appropriate size pilot holes. For concrete/brick, use a masonry drill bit and insert wall anchors.
4. Secure the wall plate to the wall using the provided lag bolts and washers. Tighten all bolts firmly.

5.4. Hanging the TV

1. Site n'enyemaka, jiri bracket ndị ejikọtara bulie TV ahụ nke ọma.
2. Hook the TV brackets onto the wall plate. Ensure both brackets are properly seated and engaged.
3. Secure the TV to the wall plate using the safety screws or locking mechanisms provided.
4. Gently test the mount's stability and ensure the TV is securely attached before releasing ya.

5.5. Installation Video Overview

For a visual guide on the product and its features, please watch the following video. While it showcases various models, the general principles of full-motion mounts apply.

6. Ọrụ

The KALOC UT75 mount offers flexible adjustments to achieve your desired viewahụmahụ.

• Ndozi Tilt: The TV can be tilted -5°/+5° to reduce glare or optimize viewing from different heights. Loosen the tilt adjustment knobs (if present) or use the provided tool, adjust to the desired angle, and then re-tighten securely.
• Swivel and Extension: The full-motion arms allow you to swivel the TV left or right and extend it away from the wall (from 30mm to 363mm). Gently push or pull the TV to the desired position.
• Njikwa USB: Utilize the integrated cable management features (if present on your model) to route and conceal cables for a clean look.

7. Nlekọta

Ndozi mgbe niile na-eme ka ihe nrụnye TV gị dị ogologo ma na-arụ ọrụ nke ọma.

• Nhicha: Jiri ákwà dị nro ma kpọọ nkụ hichaa ebe a na-etinye ihe n'elu ya. Ejila ihe nhicha ma ọ bụ ihe mgbaze.
• Lelee njikọ: Periodically (e.g., every 6 months) inspect all mounting screws and bolts to ensure they are still tight and secure.
• Lelee maka mmebi: Check for any signs of wear, corrosion, or damage to the mount components. If any damage is found, discontinue use and contact customer support.

8. Nchọpụta nsogbu

If you encounter issues with your KALOC UT75 TV mount, refer to the following common problems and solutions:

• TV abụghị ọkwa:
  • Ensure the wall plate was installed perfectly level.
  • Check if the TV brackets are evenly attached to the TV.
  • Some mounts have a post-installation leveling adjustment feature; consult the specific instructions for your model.
• Mount feels loose or unstable:
  • Immediately remove the TV from the mount.
  • Re-check all wall mounting bolts and TV bracket screws to ensure they are fully tightened.
  • Verify the wall structure is adequate and the anchors (if used) are properly installed.
  • Ensure the TV's weight does not exceed the mount's capacity.
• Difficulty adjusting tilt/swivel:
  • Ensure any locking knobs or screws for tilt adjustment are loosened before attempting to adjust.
  • Apply gentle, even pressure when moving the TV. Do not force it.

Ọ bụrụ na usoro ndị a edozighị nsogbu gị, biko kpọtụrụ ndị ọrụ nkwado ndị ahịa.

9. Ndụmọdụ onye ọrụ

• Consider using a cable management sleeve or ties to bundle and hide cables running from your TV to other devices for a cleaner aesthetic.
• When adjusting the TV's position, always hold the TV firmly with both hands to prevent accidental drops.
• Maka kacha mma viewing, adjust the tilt and swivel based on your seating position and room lighting conditions.

10. Akwụkwọ ikike na nkwado

For any questions, technical assistance, or warranty claims, please contact KALOC customer support.

Kọntaktị Nkwado ndị ahịa:
WhatsApp: +86 15013439327

Please have your model number (UT75) and purchase information ready when contacting support.