Cecotec Ready Warm 5250 Swing Box Ceramic Wall Heater

1. Ntuziaka nchekwa dị mkpa

Biko gụọ ntuziaka ndị a nke ọma tupu i jiri ngwa ahụ. Biko debe akwụkwọ ntuziaka a maka ntụaka n'ọdịnihu ma ọ bụ maka ndị ọrụ ọhụrụ.

• Gbaa mbọ hụ na mains voltage dabara na voltage gosiri na akara njirimara nke ngwa ahụ nakwa na plọg ahụ dị n'ala.
• This appliance is intended for home use only. It is not suitable for commercial or industrial use.
• Etinyela ngwa ahụ n'akụkụ ebe okpomọkụ dị, ihe ndị na-ere ọkụ, ebe mmiri dị mmiri ebe ọ nwere ike ịda ma ọ bụ banye n'ime mmiri, ma ọ bụ kwe ka ọ metụ mmiri ma ọ bụ mmiri ndị ọzọ aka. Ejila ya n'èzí.
• The surface of the product may reach high temperatures during operation. Do not leave the appliance unattended while in use.
• Na-elele waya ọkụ eletrik mgbe niile maka mmebi a na-ahụ anya. Ọ bụrụ na eriri ahụ emebie, a ga-eji ọrụ teknụzụ Cecotec dochie ya iji zere ụdị ihe egwu ọ bụla.
• Debe ihe ahụ n'elu ala dị larịị mgbe niile. Ekpuchila ihe ahụ ma ọ bụ tinye ihe n'elu ya.
• Do not twist, kink, tension or damage the power cord in any way. Protect it from sharp edges and heat sources. Do not let it touch hot surfaces.
• Ekwela ka eriri ahụ kwụgide n'elu nsọtụ elu ọrụ ahụ.
• Etinyela eriri, plọg, ma ọ bụ akụkụ ọ bụla nke ngwa ahụ na-anaghị ewepụ n'ime mmiri ma ọ bụ mmiri mmiri ndị ọzọ, ma ọ bụ kpughee njikọ eletriki na mmiri.
• Jide n'aka na aka gị kpọrọ nkụ tupu ị na-ejide plọg ahụ ma ọ bụ gbanye ngwaọrụ ahụ.

2. Ngwaahịa gafereview

The Cecotec Ready Warm 5250 Swing Box is a ceramic wall heater designed for efficient heating of rooms up to 20 m². It features advanced ceramic technology for rapid heat distribution and a range of convenient functions.

Akụkụ ndị bụ isi:

• Igwe ọkụ dị ike: 2000 W ceramic heating element for quick warmth.
• Ụdị arụ ọrụ ọtụtụ: Fan mode, Low mode (1000 W), and High mode (2000 W).
• Ikanam Display: Clear display for current settings and easy modification.
• Njikwa anya: For convenient adjustment of temperature, modes, and timer.
• Ọrụ Oscillation: Lower blade oscillation to distribute heat evenly across the room.
• Ngụ oge mmemme: Up to 12 hours, allowing scheduled operation and automatic shut-off.
• IPX2 Protection: Splash-proof design, suitable for safe use in bathrooms.
• Nzacha uzuzu: Traps macro dust particles to maintain unit cleanliness and extend lifespan.
• Nchekwa ekpo oke ọkụ: Automatic safety shut-off system.
• Wall Installation Kit: Includes all necessary components for secure wall mounting.

Ngwaahịa Views:

3. Ihe ngwugwu

Biko lelee ma ihe niile dị na ya dị ma dịkwa mma:

• Cecotec Ready Warm 5250 Swing Box Ceramic Wall Heater unit
• Njikwa anya
• Wall Installation Kit (screws, anchors, mounting bracket)
• Akwụkwọ ntuziaka onye ọrụ

4. Nwụnye

4.1. Mgbidi Mgbidi

1. Họrọ ebe: Select a suitable wall location, ensuring it is away from heat sources, flammable materials, and direct water spray (though IPX2 rated, avoid direct exposure). Ensure there is sufficient clearance around the heater for proper air circulation.
2. Kaa akara ebe a na-egwupụta ihe: Use the provided mounting bracket as a template to mark the drilling points on the wall. Ensure the points are level.
3. Oghere egwu egwu: Drill holes at the marked points using an appropriate drill bit for your wall type. Insert the wall anchors if necessary.
4. Mpempe mgbago echekwabara: Attach the mounting bracket to the wall using the provided screws. Ensure it is firmly secured.
5. Wụnye ihe na-ekpo ọkụ: Carefully lift the heater unit and align it with the mounting bracket. Secure the heater to the bracket according to the kit's specific instructions.

4.2. Njikọ ike

Once the heater is securely mounted, plug the power cord into a grounded electrical outlet. Ensure the outlet voltage kwekọrọ na nkọwapụta nke ihe na-ekpo ọkụ.

5. Ọrụ

5.1. Ogwe njikwa na Njikwa Ime Obodo

The heater can be operated using the control panel on the unit or the included remote control. The LED display shows the current temperature and mode settings.

5.2. Gbanyụọ / gbanyụọ

• Pịa Ike button on the control panel or remote control to turn the heater ON or OFF.

5.3. Ụdị arụ ọrụ

Pịa Ụdị bọtịnụ ka ịgbagharị site na ụdị ọrụ dịnụ:

• Fan Ọnọdụ: Na-ekesa ikuku n'enweghị kpo oku.
• Low Mode (1000 W): Provides gentle heating at reduced power consumption.
• High Mode (2000 W): Provides maximum heating power for rapid warming.

5.4. Ịtọpụta okpomọkụ

Jiri ihe Temperature Up (+) na Temperature Down (-) buttons on the control panel or remote control to set your desired room temperature. The LED display will show the selected temperature.

5.5. Iji ngụ oge

The timer function allows you to set the heater to operate for a specific duration (up to 12 hours) before automatically turning off.

• Pịa Ngụ oge bọtịnụ na remote njikwa.
• Each press will increase the operating time by 1 hour, up to a maximum of 12 hours.
• Ngosipụta ga -egosi oge fọdụrụ.

5.6. Ọrụ Oscillation

To activate or deactivate the oscillation of the lower blade for wider heat distribution:

• Pịa Mgbanwe bọtịnụ na remote njikwa.

6. Nlekọta

Nlekọta anya mgbe niile na-eme ka arụmọrụ dị mma ma gbasaa ogologo ndụ nke ikpo ọkụ gị.

6.1. Ichacha Unit

1. Mgbe niile, wepụ ihe na-ekpo ọkụ ahụ na ebe a na-ere ọkụ eletrik ma hapụ ya ka ọ jụọ oyi kpamkpam tupu e hichaa ya.
2. Jiri nwayọ hichaa elu mpụta, damp akwa . Ejila ihe nchacha abrasive, ihe mgbaze, ma ọ bụ kemịkalụ siri ike.
3. Gbaa mbọ hụ na ọ nweghị mmiri na-abanye n'ime akụrụngwa.

6.2. Na-ehicha uzuzu uzuzu

The integrated dust filter helps maintain the heater's efficiency.

1. Unplug the heater and allow it to cool.
2. Locate the dust filter (refer to the product diagram if available, typically at the air intake).
3. Jiri nlezianya wepụ ihe nzacha ahụ.
4. Clean the filter using a vacuum cleaner or by rinsing it gently under cool water. Ensure it is completely dry before reinserting.
5. Reinsert the clean, dry filter into its position.

6.3. Nchekwa

If storing the heater for an extended period, clean it thoroughly, cover it to protect from dust, and store it in a cool, dry place.

7. Nchọpụta nsogbu

Before contacting technical service, please refer to the following table for common issues and solutions:

8. Nkọwapụta

9. Ndụmọdụ onye ọrụ

• For optimal heating efficiency, ensure doors and windows of the room are closed when the heater is in operation.
• Utilize the timer function to pre-heat a room before you enter or to automatically turn off the heater when you no longer need it, saving energy.
• Regularly clean the dust filter to maintain air quality and the heater's performance. A clogged filter can reduce efficiency.
• Position the heater where its oscillation function can best distribute warm air throughout the desired area.

10. Akwụkwọ ikike na nkwado

This product is manufactured by Cecotec. For any issues, repairs, or questions regarding your Cecotec Ready Warm 5250 Swing Box ceramic wall heater, please contact the official Cecotec technical service.

• Mmebi Ụdọ Ike: If the power cord is damaged, it must be replaced by the official Cecotec technical service to prevent hazards. Do not attempt to repair it yourself.
• Debe akwụkwọ ntuziaka a: Retain this user manual for future reference. It contains important information regarding the safe and efficient operation of your appliance.