Okwu mmalite
Daalụ maka ịzụrụasing the Stitch Disney Digital Watch. This manual provides detailed instructions on how to set up, operate, and maintain your new watch. Please read it carefully to ensure proper use and longevity of your product.
Nkọwapụta
| Njirimara | Nkọwa |
|---|---|
| Aha ika | Disney |
| Nọmba nlereanya | 4DDQ0418 |
| Ntughari | Dijitalụ |
| Ụdị ngosi | Dijitalụ |
| Ihe gbasara ikpe | Plastic |
| Ụdị ikpe | Rektangulu |
| Ọkpụrụkpụ ikpe | 10mm |
| Ọkụkụ dayameta | 34mm |
| Ụdị ihe ọkpụkpọ pịa windo | Plastic |
| Ụdị ihe Band | Silikoni |
| Ogologo band | 21cm |
| Obosara band | 18mm |
| Ụdị mgbako | Mkpọchi zoro ezo |
| Mmiri Nguzogide Omimi | 3 Ogwe |
| Atụmatụ | Back Light, LED Display, Auto Date, Complete Calendar |
| Ụdị | Ejiji na Nkịtị |
| Mmalite | Mainland China |
Ntuziaka nhazi
This section guides you through the initial setup of your digital watch, including activating the display and setting the time and date.
1. Activating the Display
The watch display is typically off to conserve battery. To activate it and view the time:
- Press the button on the right side of the watch once. The display will light up, showing the current time.
2. Ịtọ oge na ụbọchị
To adjust the time and date:
- From the time display, press and hold the button for approximately 3 seconds until the hour digits begin to flash. This indicates you are in setting mode.
- Nhazi oge: While the hour digits are flashing, short press the button repeatedly to advance the hour. The watch supports both 12-hour (with AM/PM indicator) and 24-hour formats.
- Nhazi nkeji: Once the hour is set, press and hold the button again for 3 seconds. The minute digits will begin to flash. Short press the button to adjust the minutes.
- Set Month: Press and hold the button again. The month digits will flash. Short press to adjust the month.
- Tọọ ụbọchị: Press and hold the button again. The day digits will flash. Short press to adjust the day.
- Ọnọdụ Ntọala Pụọ: After setting the day, press and hold the button one last time to exit the setting mode. The display will stop flashing, and your settings will be saved.
For a visual guide, please refer to the instructional video below:
Na-arụ ọrụ Watch
Your Stitch Disney Digital Watch is designed for simple and intuitive operation.
1. Ụdị ngosi
The watch features multiple display modes that can be cycled through with a single press of the button:
- Ngosipụta oge: A short press of the button will show the current time (hours and minutes).
- Ngosipụta ụbọchị: Another short press will switch the display to show the current date (month and day).
- Atụmatụ ndị ọzọ: Depending on the model, additional short presses may cycle through other features like seconds or a simple animation.
2. Atụmatụ gafereview
- Ikanam Display: Bright and clear digital display for easy readability.
- Ìhè azụ: The display illuminates when activated, making it visible in low-light conditions.
- Auto Date: The watch automatically adjusts for the correct date.
- Kalenda zuru ezu: Displays both month and day.
Nlekọta na nlekọta
Proper care will help extend the life and appearance of your watch.
1. Mmiri Nguzogide
Your watch has a water resistance rating of 3 Bar (30 meters), which means it is suitable for daily use and can withstand splashes or brief immersion in water, such as hand washing.
Ọkwa ndị dị mkpa:
- Avoid hot water and steam. Exposure to hot water or steam can damage the watch's seals and internal components.
- In some cases, water vapor may appear inside the watch due to temperature differences. This is normal. Placing the watch on a desiccant (e.g., silica gel packet) will help the vapor disappear.
- Do not press buttons while the watch is wet or submerged.
2. Nhicha
- Hichaa akpa elekere ahụ na eriri ya na ihe dị nro, damp akwa .
- Avoid using harsh chemicals or abrasive materials, as these can damage the plastic case and silicone band.
- Hụ na elekere ahụ kpọrọ nkụ kpamkpam tupu ị debe ya ma ọ bụ eyi ya.
3. Ngbanwe batrị
This watch uses a non-rechargeable button-cell battery. When the display becomes dim or stops working, the battery will need to be replaced. It is recommended to have the battery replaced by a professional watch technician to ensure the water resistance seal is maintained.
Nchọpụta nsogbu
Nke a bụ ngwọta maka nsogbu nkịtị ị nwere ike ihu:
1. Watch Display Not Turning On
- Lelee batrị: The battery may be depleted. Refer to the 'Battery Replacement' section under Maintenance.
- Pịa bọtịnụ: Ensure you are pressing the button firmly. A single short press should activate the display.
2. Incorrect Time or Date
- Reset Time/Date: Follow the 'Setting Time and Date' instructions in the Setup section to correct the time and date.
3. Water Vapor Inside Display
- Temperature Difference: This can occur due to sudden temperature changes. Place the watch with a desiccant (e.g., silica gel) in an airtight container for a few hours to absorb the moisture. If the issue persists, consult a professional.
Ndụmọdụ Onye ọrụ
- Ndụ batrị: To maximize battery life, avoid unnecessary activation of the display. The display automatically turns off after a few seconds of inactivity.
- Mkpughe mmiri: While the watch is water-resistant, it's best to remove it before showering, swimming, or engaging in water sports to prevent potential damage from prolonged exposure or high-pressure water.
- Oge nhazi: If you find setting the time challenging, watch the instructional video in the 'Setup Instructions' section for a clear demonstration.
Akwụkwọ ikike
This product comes with a 1-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by misuse, accidents, unauthorized repairs, or normal wear and tear.
Nkwado
If you have any questions or require further assistance with your Stitch Disney Digital Watch, please contact the seller or retailer from whom you purchased the product. They will be able to provide specific support and guidance.
