Tineco Floor one 2.0 LED Wet & Dry Wireless Handheld Vacuum Cleaner with Mop User Manual

Okwu mmalite

This manual provides detailed instructions for the safe and efficient use of your Tineco Floor one 2.0 LED Wet & Dry Wireless Handheld Vacuum Cleaner with Mop. Please read this manual thoroughly before operating the appliance and retain it for future reference. This innovative device combines powerful vacuuming with effective mopping, featuring smart dirt detection and self-cleaning capabilities to simplify your cleaning routine.

Ngwaahịa gafereview

Atụmatụ igodo

• Wet & Dry Cleaning: Simultaneously vacuums and mops hard floors.
• Wireless & Handheld Design: Offers cordless convenience and easy maneuverability.
• Ikanam Display: Provides real-time information on battery status, cleaning mode, and dirt levels.
• Smart Dirt Detection: Automatically adjusts suction power and water flow based on detected dirt levels (Red/Blue ring indicator).
• 99.9% Electrolysis Sterilization: Utilizes electrolyzed water for deep cleaning and sterilization without additional disinfectants.
• Nhicha site n'akụkụ ruo n'akụkụ: Designed with a brush that cleans close to baseboards and corners.
• Constant Pressure Water Squeezing Bar: Ensures efficient dirty water recovery and removal of solid debris like hair and dust.
• High-Efficiency Single Roller Brush: Optimized for effective cleaning and designed to prevent tangles.
• Ọrụ ihicha onwe: Simplifies maintenance by cleaning the roller brush automatically.
• Centrifugal Air Drying: Hygienically dries the roller brush and internal pipes to prevent odors and bacterial growth.
• Ogologo ndụ batrị: Up to 37 minutes of runtime, capable of cleaning up to 230m² on a single charge.
• Large Water Tanks: Features an 800ml clean water tank and a 720ml dirty water tank.
• moto dị ike: Equipped with a 100,000 rpm motor speed, 450 rpm roller brush, and 68W maximum suction power.

Ngwa

The Tineco Floor one 2.0 LED consists of the following main components:

• Main Unit (includes motor, dirty water tank, and LED display)
• Jikwaa
• Tankị mmiri dị ọcha
• Mmiri mmiri ruru unyi
• Mgbakọ ahịhịa ahịhịa
• Nchaji ntọala
• Ihe nkwụnye ọkụ

Melite

1. Iwepu: Carefully remove all components from the packaging. Ensure all parts listed in the "Components" section are present.
2. Mgbakọ njikwa: Tinye aka ahụ n'ime isi ihe ahụ ruo mgbe ọ pịara nke ọma n'ebe ahụ.
3. Ịchaji:
   • Debe isi ngwaọrụ ahụ n'elu ntọala chaja.
   • Jikọọ ihe nkwụnye ike ahụ na ntọala chaja wee tinye ya na oghere mgbidi.
   • The LED display will indicate the charging status. A full charge takes approximately 4 hours.
   • Gbaa mbọ hụ na chajịla ngwaọrụ ahụ nke ọma tupu ejie ya mbụ.
4. Na-ejuputa tank mmiri dị ọcha:
   • Wepụ tankị mmiri dị ọcha n'ime isi ngwaọrụ ahụ.
   • Open the tank cap and fill it with clean tap water. For enhanced cleaning and sterilization, the device uses electrolysis, so no additional cleaning solution is typically required.
   • Close the cap securely and reattach the clean water tank to the main unit.

Ọrụ

1. Ike Na: Press the Power button on the handle to turn on the device. The LED display will illuminate.
2. Ụdị nhicha: The device features smart dirt detection. It will automatically adjust suction power and water flow based on the level of dirt detected on the floor. The LED display will show a red ring for heavy dirt and a blue ring for light dirt, indicating the real-time cleaning status.
3. Malite ihicha: Tilt the main unit back to engage the roller brush and begin cleaning. Move the vacuum cleaner slowly over the floor surface.
4. Wet & Dry Functionality: The device simultaneously vacuums solid debris and mops with clean water. The constant pressure water squeezing bar ensures dirty water is efficiently recovered into the dirty water tank.
5. Nchacha ọnụ: Utilize the edge-to-edge brush design to clean along walls and into corners effectively.
6. Gbanyụọ: Press the Power button again to turn off the device.

Nlekọta

Regular maintenance ensures optimal performance and extends the lifespan of your Tineco Floor one 2.0 LED.

1. Ikpopu tank mmiri ruru unyi:
   • Mgbe ejiri ya mee ihe ọ bụla, wepụ tankị mmiri ruru unyi n'ime isi ihe ahụ.
   • Jiri nlezianya mepee tankị ahụ ma tụfuo mmiri ruru unyi ahụ.
   • Jiri mmiri dị ọcha kpochaa tank ahụ nke ọma.
   • Allow the tank to air dry before reattaching it.
2. Usoro ihicha onwe:
   • Debe ihe nhicha ahụ n'elu ntọala chaja ya.
   • Ensure the clean water tank has sufficient water.
   • Press the dedicated self-cleaning button (refer to the device for exact button location, usually indicated by an icon).
   • The device will perform a self-cleaning cycle, washing the roller brush and internal pipes.
   • After the cycle, empty the dirty water tank.

   

3. Roller Brush Cleaning and Drying:
   • Even with self-cleaning, occasionally remove the roller brush for manual inspection and cleaning.
   • Remove any tangled hair or debris from the brush.
   • The centrifugal air drying function helps dry the brush and pipes after cleaning, preventing odors.

   

4. HEPA Filter Maintenance:
   • Locate the HEPA filter (usually near the dirty water tank or motor).
   • Remove the filter and tap it gently to dislodge dust.
   • Rinse the filter under running water if necessary, ensuring it is completely dry before reinstallation.
   • Replace the HEPA filter every 3-6 months, or as needed, depending on usage.

Nchọpụta nsogbu

If you encounter issues with your Tineco Floor one 2.0 LED, please refer to the following common problems and solutions:

Nkọwapụta

Ndụmọdụ Onye ọrụ

• For optimal cleaning, ensure the clean water tank is filled and the dirty water tank is emptied before each use.
• Were advantage of the smart dirt detection feature by allowing the vacuum to adjust its power automatically for different cleaning needs.
• Regularly check and clean the HEPA filter to maintain strong suction and air quality.
• Utilize the self-cleaning function after each significant use to keep the roller brush and internal pipes hygienic and free from odors.
• The device is designed for onsite installation after-sales service, which can be beneficial for complex issues.

Akwụkwọ ikike na nkwado

Your Tineco Floor one 2.0 LED Wet & Dry Wireless Handheld Vacuum Cleaner with Mop comes with a Akwụkwọ ikike nke afọ 1 site na ụbọchị ịzụrụ.

Ọrụ mgbe erechara: Onsite installation support is provided for this product. For warranty claims, technical assistance, or service inquiries, please contact your retailer or the manufacturer's customer support. Keep your proof of purchase for warranty validation.

Ajụjụ A na-ajụkarị (FAQ)

Q: Which category does it belong to?

A: It belongs to the cordless handheld vacuum cleaner category.

Ajụjụ: Ogologo oge ole ka batrị na-adịru?

A: The battery life of this product is between 30-59 minutes.

Q: How much power does it consume?

A: It consumes power in the range of 2200-2599W.

Q: Can you tell me about its type?

A: It is a cordless handheld vacuum cleaner.

Q: What are the notable features of this product?

A: Some of the notable features include onsite installation service, a brushless motor, and a working time of 30-60 minutes. Please note that this model is not app-controlled.

Q: What's the model number of this product?

A: The model number of it is Tineco Floor one 2.0 LCD.