Okwu mmalite
The 1Mii B06HD+ is a high-fidelity Bluetooth 5.1 receiver designed to upgrade your existing audio systems with wireless streaming capabilities. Featuring advanced audio codecs like LDAC, aptX HD, and aptX Low Latency, along with a premium ES9018K2M SABRE32 DAC, it delivers exceptional sound quality. Its intuitive OLED display provides real-time information, and the built-in battery offers portability for various applications, from home stereos to car audio systems.
Kedu ihe dị na Igbe ahụ
Image: The 1Mii B06HD+ unit and included cables.
- 1Mii B06HD+ HiFi Bluetooth Receiver Unit
- Ngwa anya Audio USB
- Cable Audio Coaxial
- Cable Audio RCA
- 3.5mm Audio USB
- Igwe nchaji USB
- Akwụkwọ ntuziaka (akwụkwọ a)
Ngwaahịa gafereview
Foto: N'ihu view of the 1Mii B06HD+ with OLED display and control buttons.
Akụkụ ndị bụ isi:
- Bluetooth 5.1 with Qualcomm QCC5125 Chip: Ensures stable and high-quality wireless audio transmission.
- ES9018K2M SABRE32 DAC: Audiophile-grade Digital-to-Analog Converter for superior sound performance.
- Nkwado ọdịyo dị elu: Supports LDAC (up to 990kbps, 24bit/96kHz), aptX HD (up to 576kbps, 24bit/48kHz), aptX Low Latency, and AAC/SBC codecs.
- Ihuenyo OLED: Clearly shows connected Bluetooth device, song name, sampling rates, battery level, and active Bluetooth codec.
- Batrị arụnyere n'ime ya: Offers up to 13 hours of playtime on a 3.5-hour charge, making it portable.
- Multiple Audio Interfaces: Features Optical, Coaxial, and RCA outputs for wide compatibility with various audio systems.
- Multipoint Njikọ: Connects to two Bluetooth devices simultaneously, allowing easy switching between audio sources.
Image: The OLED display showing song information, sampling rate, battery, and codec.
Image: Rear panel with Optical, Coaxial outputs, RCA IN ports, and DC 5V power input.
Ntuziaka nhazi
1. Ịchaji ngwaọrụ
- Connect the provided USB charging cable to the DC 5V port on the B06HD+ and to a 5V USB power adapter (not included).
- A full charge takes approximately 3.5 hours and provides up to 13 hours of playtime.
- Ihe dị mkpa: Only use a 5V power supply. Using higher voltage adapters (e.g., 9V /12V) can damage the device.
2. Ijikọ gị Audio System
The B06HD+ offers multiple output options to connect to various audio systems:
Image: Compatibility diagram showing connections to speakers, headphones, Echo Dot, and car audio systems.
- RCA Analog mmepụta: Use the included RCA cable to connect the RCA output ports (red and white, typically located on the top of the device) on the B06HD+ to the RCA input ports on your amplifier, receiver, or powered speakers.
- Ngwa anya Digital mmepụta: Use the included optical cable to connect the B06HD+ to the optical input port on your audio system for digital audio transmission.
- Mmepụta dijitalụ Coaxial: Use the included coaxial cable to connect the B06HD+ to the coaxial input port on your audio system for digital audio transmission.
- 3.5mm Analog Output (via RCA adapter): For devices with a 3.5mm auxiliary input (like some car audio systems or portable speakers), you can use an RCA to 3.5mm adapter (not included) with the RCA analog output cables.
- RCA Analog Input (Optional): The device also features RCA IN ports on the rear panel, allowing you to connect an external analog audio source to the B06HD+. This input is separate from the Bluetooth receiving function.
Image: The B06HD+ connected to a speaker, demonstrating a typical RCA output setup.
Image: Rear panel with Optical, Coaxial outputs, RCA IN ports, and DC 5V power input.
3. Pairing with Bluetooth Devices
- Gbanyụọ: Press and hold the power button (marked with a power symbol) on the B06HD+ until the OLED display lights up.
- Tinye Ụdị Mmakọ: The device will automatically enter pairing mode, indicated by a flashing Bluetooth icon on the OLED display.
- Mee Bluetooth rụọ ọrụ na ngwaọrụ gị: On your smartphone, tablet, or computer, go to the Bluetooth settings and enable Bluetooth.
- Select "1Mii B06HD+": From the list of available devices, select "1Mii B06HD+".
- Kwenye njikọ: Once connected, the Bluetooth icon on the B06HD+ display will become solid, and the display will show the connected device name and active codec.
Ntuziaka ọrụ
Image: Control buttons for Bluetooth, Volume/Track, and Power.
1. Gbanyụọ / gbanyụọ
- Gbanyụọ: Pịa ma jide bọtịnụ ike (rightmost button) for a few seconds until the OLED display activates.
- Gbanyụọ ike: Pịa ma jide bọtịnụ ike for a few seconds until the OLED display turns off.
2. Volume and Track Adjustment
- Mpịakọta nke ala / Track gara aga: Pịa "-" button (middle-left button) to decrease volume. Hold the "-" button to go to the previous track.
- Olu elu / Na-esote Track: Pịa "+" button (middle-right button) to increase volume. Hold the "+" button to go to the next track.
3. Igodo Bluetooth
- Pịa bọtịnụ Bluetooth (leftmost button) to re-enter pairing mode or disconnect the current device.
4. Multipoint Njikọ
The B06HD+ can be connected to two Bluetooth devices simultaneously. To switch between audio sources:
- Ensure both devices are paired and connected to the B06HD+.
- Pause playback on the currently active device.
- Start playing music on the second connected device. The B06HD+ will automatically switch to the audio from the second device.
Image: Multipoint connection setup with a laptop and smartphone.
Nkọwapụta
| Njirimara | Nkọwapụta |
|---|---|
| Aha ika | 1 Mii |
| Nọmba nlereanya | B06HD+ |
| Ụdị ikuku | Bluetooth 5.1 |
| Chip Bluetooth | Ihe nhazi Qualcomm QCC5125 |
| DAC Chip | ES9018K2M SABRE32 |
| Codecs akwadoro | LDAC, aptX HD, aptX Low Latency, AAC, SBC |
| LDAC SampỌnụ ego | Up to 24bit/96kHz (990kbps) |
| aptX HD SampỌnụ ego | Up to 24bit/48kHz (576kbps) |
| AAC SampỌnụ ego | Up to 16bit/96kHz (264kbps) |
| SBC SampỌnụ ego | Up to 16bit/48kHz (328kbps) |
| Interface | Optical, Coaxial, RCA (Output), RCA (Input), DC 5V (Power Input) |
| Track ụda | Ugboro abụọ |
| Oge egwuregwu | Ruo awa iri abụọ |
| Oge Nchaji | Ihe ruru. awa 3.5 |
| Ikuku iche | Up to 50ft indoors, 80ft outdoors (without obstacles) |
| Mmalite | Mainland China |
| Asambodo | CE, FCC, RoHS |
Image: Bitrate comparison for LDAC and SBC codecs.
Image: Detailed comparison of sampling rates and bitrates for various audio codecs.
Nchọpụta nsogbu
- Enweghị ụda:
- Ensure the B06HD+ is powered on and fully charged.
- Verify that the B06HD+ is correctly connected to your audio system (amplifier, speakers, etc.) using the appropriate cables (RCA, Optical, Coaxial).
- Check that your audio system's input is set to the correct source (e.g., "AUX", "Optical", "Coaxial").
- Confirm that your Bluetooth device is successfully paired and connected to the B06HD+.
- Adjust the volume on both your Bluetooth device and the connected audio system.
- Enweghị ike ijikọ:
- Make sure the B06HD+ is in pairing mode (flashing Bluetooth icon on OLED display). If not, press the Bluetooth button.
- Ensure your Bluetooth device's Bluetooth is enabled and it's searching for new devices.
- Move your Bluetooth device closer to the B06HD+.
- Try restarting both the B06HD+ and your Bluetooth device.
- Clear previous Bluetooth connections on your device if you're having trouble connecting.
- Ọdịmma ụda adịghị mma / Nkwụsị:
- Ensure there are no significant obstacles (walls, large metal objects) between the B06HD+ and your Bluetooth device.
- Move away from potential sources of interference (Wi-Fi routers, microwaves).
- Check if your Bluetooth device supports the high-quality codecs (LDAC, aptX HD) and if they are enabled.
- Ensure the B06HD+ is adequately charged.
- Ngwaọrụ anaghị aza:
- If the device becomes unresponsive, try pressing and holding the power button for an extended period (10-15 seconds) to force a restart.
Ndụmọdụ Onye ọrụ
- Car Audio Connection: The B06HD+ can be used in a car with an auxiliary (AUX) input. Connect the RCA outputs of the B06HD+ to an RCA to 3.5mm adapter, then plug the 3.5mm end into your car's AUX jack. Ensure the car stereo is set to the AUX input.
- Single Audio Stream for Multipoint: While the device supports connecting to two Bluetooth sources simultaneously, only one device can play audio at a time. To switch, simply pause the current playback and start playing on the other connected device.
- Optimal Sound Quality: For the best audio experience, ensure your source device supports LDAC or aptX HD codecs and that these are enabled in your device's Bluetooth settings.
- Ịnye ọkụ: Always use a 5V power adapter for charging to prevent damage to the unit.
Nlekọta
- Nhicha: Use a soft, dry cloth to clean the device. Do not use liquid cleaners or aerosols.
- Nchekwa: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
- Zere Mmiri: This device is not waterproof. Keep it away from liquids.
- Jiri nlezianya mee ihe: Avoid dropping or subjecting the device to strong impacts.
Akwụkwọ ikike & Nkwado
This product comes with a 1-year warranty from the 1Mii Official Store, covering manufacturing defects. For any quality problems, you may be eligible for a return within 7 days of receipt. For technical support or warranty claims, please contact the seller directly.
Asambodo: CE, FCC, RoHS compliant.
Video ngwaahịa
Video: A short demonstration of the 1Mii B06HD+ HiFi Bluetooth Receiver's features and interfaces.
