MW PW M -90 usoro Constant Voltage PWM Mmepụta LED Akwụkwọ ntuziaka onye nwe

Usoro PWM-90 bụ onye ọkwọ ụgbọ ala 90W LED AC / DC na-egosipụta voltaji mgbe niiletage mode na PWM style mmepụta, nke bụ ike ịnọgide na-enwe nchapụta homogeneity mgbe ị na-anya ụdị ọ bụla nke ikanam ibe.PWM-90 arụ ọrụ si 90 ~ 305VAC ma na-enye ụdị dị iche iche gosiri vol.tagnke dị n'etiti 12V na 48V. Ekele maka arụmọrụ dị elu ruo 90.5%, na-enweghị ihe ọ bụla, usoro ahụ dum nwere ike ịrụ ọrụ maka -40C + 85C ọnọdụ okpomọkụ n'okpuru ikuku ikuku n'efu. A na-eji usoro nchebe IP67 dị elu mee ihe na usoro ahụ dum ma dị mma iji rụọ ọrụ maka nkụ, damp ma ọ bụ ebe mmiri. PWM-90 nwere ọrụ na-ebelata nke na-agbanwe usoro ọrụ nke mmepụta, na-enye nnukwu mgbanwe maka ngwa eriri LED.

Ihe ntinye ihe nlere

Nkọwapụta

Ụdị		PWM-90-12	PWM-90-24	PWM-90-36	PWM-90-48
Mpụta	DC VOLTAGE	12V	24V	36V	48V
	EKWERE UGBUA	7.5A	3.75A	2.5A	1.88A
	EGO IKE	90W	90W	90W	90.24W
	IGBU RANGE	0 ~ 100%
	PWM Ugboro ugboro (Ụdị.)	1.47kHz maka oghere/DA-ụdị, 2.5kHz maka DA2-ụdị
	NTKWU, NA-ebili oge Rịba ama. 2 Rịba ama. 9	500ms, 80ms/115VAC ma ọ bụ 230VAC
	Jidesie oge (Ụdị)	16ms / 115VAC ma ọ bụ 230VAC
Ntinye	VOLTAGE nso Rịba ama.3	90 ~ 305VAC 127 ~ 431VDC (Biko rụtụ aka na ngalaba “SATIC CHARACTERISTIC”)
	Ugboro ugboro	47 ~ 63Hz
	IHE MGBE IKE (Ụdị)	PF> 0.98/115VAC, PF>0.96/230VAC, PF>0.92/277VAC @ zuru ibu (Biko rụtụ aka na ngalaba “PAWER FACTOR (PF) CharacTERISTIC”
	Mkpokọta ỌR .A NKWUKWU	THD<20%(@load≧60%/115VAC, 230VAC; @load≧75%/277VAC) (Biko rụtụ aka na ngalaba “TOTAL HARMIC DISTORTION”)
	OKWU (Ụdị)	88%	90.5%	90.5%	90.5%
	AC ugbu a (Ụdị)	0.95A / 115VAC 0.5A / 230VAC 0.4A / 277VAC
	INRUSH Ugbu a (pdị.)	Oyi malitere 60A(twidth=550 μs tụrụ na 50% Ipeak) na 230VAC; Maka NEMA 410
	MAX. Mba. nke PSU na 16A CIRCUIT BREAKER	Nkeji 3 (onye na-emebi okirikiri nke ụdị B) / nkeji 6 (onye na-emebi okirikiri nke ụdị C) na 230VAC
	NKWUKWU UGBUA	<0.25mA / 277VAC
	  	<0.5W
Nchedo	bufee	108 ~ 130% gosiri ike mmepụta
		Ọnọdụ mgbakasị ahụ, na-agbake na-akpaghị aka ka ewepụrụ ọnọdụ mmejọ
	Obere oge	Mechie o/p voltage, megharịa ike iji nwetaghachi (belụsọ ụdị DA2) Ọnọdụ mgbakasị ahụ, na-agbake na-akpaghị aka ka ewepụrụ ọnọdụ mmejọ (naanị maka ụdị DA2)
	N'elu VOLTAGE	15 ~ 17V	28 ~ 34V	41 ~ 46V	54 ~ 60V
		Mechie o/p voltage, re-ike na-agbake
	GARA Okpomọkụ	Mechie o/p voltage, re-ike na-agbake
Gburugburu Ebe Obibi	ỌRỤ NA-arụ ọrụ.	Tcase = -40 ~ +85 ℃ (Biko rụtụ aka na ngalaba "OUTPUT LOAD vs TEMPERATURE")
	MAX. IGBU OZI.	Akpa =+85 ℃
	Iru mmiri na-arụ ọrụ	20 ~ 95% RH na-abụghị condensing
	Nchekwa TEMP., IHU URU	-40 ~ +80 ℃, 10 ~ 95% RH
	TEMP. EGO	0.03%/℃ (0 ~ 50 ℃)
	VIBRATION	10 ~ 500Hz, 5G 12min./1 okirikiri, oge maka 72min. nke ọ bụla tinyere X, Y, Z axe
Nchekwa & EMC	Ọkọlọtọ nchekwa Rịba ama. 5	UL8750 (ma e wezụga maka DA-Ụdị), CSA C22.2 Nke 250.13-12; ENEC BS EN/EN61347-1, BS EN/EN61347-2-13 nọọrọ onwe, BS EN/EN62384, IP67,BIS IS15885(maka 12,24,48 oghere Ụdị naanị), EAC TP TC 004,GB19510.1,GB19510.14 kwadoro; Nhazi na-ezo aka na BS EN/EN60335-1; Dị ka BS EN/EN61347-2-13 mgbakwunye J dabara maka nrụnye mberede.
	Ụkpụrụ DALI	IEC62386-101, 102 maka DA/DA207,251-ụdị naanị,Ngwaọrụ ụdị 2(DT6)
	NA -ECHE VOLTAGE	I/PO/P:3.75KVAC; I/P-DA:1.5KVAC; O/P-DA:1.5KVAC
	Nguzogide dịpụrụ adịpụ	I/PO/P: 100M Ohms / 500VDC / 25℃/ 70% RH
	EMC EMISỌ Rịba ama. 6	Nkwenye na BS EN/EN55015, BS EN/EN61000-3-2 Klas C (@load≧60%); BS EN/EN61000-3-3,GB17743 na GB17625.1,EAC TP TC 020
	EMC MGBE	nnabata na BS EN/EN61000-4-2,3,4,5,6,8,11; BS EN / EN 61547, ọkwa ụlọ ọrụ ọkụ (Line-Line Immunity Line 2KV), EAC TP TC 020
Ndị ọzọ	MTBF	2394.5K elekere nkeji. Telcordia SR-332 (Bellcore); 224.2K elekere min. MIL-HDBK-217F (25 ℃)
	Akụkụ	1716337.5mm (LWH)
	Mbukota	0.77Kg; 18pcs / 14.9Kg / 0.97CUFT
IHE	A na-atụle parampat niile akọwaghị aha ya na ntinye 230VAC, akara ugbu a yana 25C nke ọnọdụ okpomọkụ. Enwere ike ịchọrọ iwepụ ọkwa n'okpuru obere ntinye voltages. Biko rụtụ aka na ngalaba “SATIC CHARACTERISTIC” maka nkọwa. A na-atụ ogologo oge nhazi na mmalite oyi mbụ. Ịgbanye/ Gbanyụọ onye ọkwọ ụgbọ ala nwere ike ibute mmụba nke oge akwadoro. A na-ewere onye ọkwọ ụgbọ ala dị ka akụkụ nke a ga-arụ ọrụ na ngwa ikpeazụ. Ebe ọ bụ na arụmọrụ EMC ga-emetụta site na nrụnye zuru oke, ndị na-emepụta akụrụngwa ikpeazụ ga-emezigharị Ntuziaka EMC na nrụnye zuru ezu ọzọ. Usoro a na-ezute ogologo ndụ ndụ nke> 50,000 awa ọrụ mgbe Tcase, karịsịa c) point (ma ọ bụ TMP, kwa DLC), bụ ihe dịka 75C ma ọ bụ obere. Biko rụtụ aka na nkwupụta ikike na MEAN WELLs websaịtị na http://www.meanwell.com The ambient okpomọkụ derating nke 3.5 C/1000m nwere fanless ụdị na nke 5 CH000m nwere fan ụdị maka ịrụ ọrụ elu karịa 2000m(65O0f). Maka ndetu ngwa ọ bụla yana ịkpachara anya nrụnye ọrụ akaebe mmiri IP, biko rụtụ aka n'akwụkwọ ntuziaka onye ọrụ tupu iji ya. https://www.meanwell.com/Upload/PDF/LED_EN.pdf Dabere na IEC 62386-101/102 DALI ike na usoro oge na nkwụsịtụ, oge nhazi kwesịrị iji onye njikwa DALI nwalee. nwere ike ịkwado maka ike DALI na ọrụ, ma ọ bụghị na oge nhazi ga-adị elu karịa 0.5 sekọnd maka ụdị DA. Nkwuputa Ibu ngwaahịa: Maka ozi zuru ezu, biko rụtụ aka https://www.meanwell.com/serviceDisclaimer.aspx

DIMMING ọrụ

DIM+ maka Ụdị oghere
- DA+ maka ụdị DA/DA2
DIM- maka Ụdị oghere
- DA- maka ụdị DA/DA2

IHE: DA / DA2-ụdị abụghị ihe dị iche n'etiti "+" na "-" okporo osisi

Ụkpụrụ nbelata maka mmepụta ụdị PWM

A na-enweta ntu oyi site n'ịgbanwe usoro ọrụ nke mmepụta ugbu a.

Mpụta DC ugbu a

Usoro ọrụ(%) = TON/T×100%
Mmepụta ugboro PWM: 1.47kHz maka oghere/DA ụdị 2.5kHz maka DA2-ụdị

3 n'ime 1 arụrụ arụ ọrụ (maka oghere-ụdị)

Tinye otu n'ime usoro atọ dị n'etiti DIM+ na DIM-: 0 ~ 10VDC, ma ọ bụ 10V PWM mgbama ma ọ bụ nguzogide.
Na-ebelata isi iyi ugbu a site na ọkọnọ ike: 100μA (ụdị.)

Na-etinye mgbakwunye 0 ~ 10VDC

Itinye mgbakwunye 10V PWM mgbama (ugboro ugboro 100Hz ~ 3KHz)

Na-etinye nguzogide mgbakwunye

Rịba ama

Min. okirikiri ọrụ nke mmepụta ugbu a bụ ihe dịka 0.15%, ntinye na-ebelata ihe dị ka 6KΩ ma ọ bụ 0.6VDC, ma ọ bụ 10V PWM mgbama nwere 6% ọrụ okirikiri.
Usoro ọrụ nke mmepụta ihe ugbu a nwere ike ịdaba na 0% mgbe ntinye ntugharị na-erughị 6KΩ ma ọ bụ ihe na-erughị 0.6VDC, ma ọ bụ 10V PWM mgbama nwere usoro ọrụ na-erughị 6%.

DALI Interface (akụkụ isi; maka DA/DA2-ụdị)

Tinye akara ngosi DALI n'etiti DA+ na DA-.
DALI protocol nwere otu iri na isii na adreesị 16.
A na-edozi nzọụkwụ mbụ na 0.2% nke mmepụta

ỌKWU Mpụta vs OMUME

IJI MMADỤ STATIC/ IKE IKE (PF).

Achọrọ iwepụ ọkwa n'okpuru obere ntinye voltage.

Mkpokọta mgbasa ozi ọjọọ (THD)

48V Model, Tcase na 75 ℃

Ịrụ ọrụ vs ibu

Usoro PWM-90 nwere arụmọrụ ọrụ dị elu nke nwere ike iru 90.5% na ngwa ubi.

48V Model, Tcase na 75 ℃

Oge ndụ

Ihe Ngosi

Nkọwapụta igwe

Ụdị oghere

Okwu Mba: PWM-90P
Nkeji: mm

DA/DA2-Ụdị

Na -akwado ntụnye ntụnye

Akwụkwọ ntuziaka nwụnye

Njikọ maka ụdị oghere

Ịdọ aka ná ntị

Tupu ịmalite nrụnye ma ọ bụ ọrụ mmezi ọ bụla, biko kwụpụ ọkụ eletrik f ‧ rom the utility. Gbaa mbọ hụ na enweghị ike ijikọ ya ọzọ n'amaghị ama!

Debe ikuku ikuku kwesịrị ekwesị gburugburu unit ahụ ma atụbakwala ihe ọ bụla na ya. Ọzọkwa, a ga-edobe mkpochapụ 10-15 cm mgbe ngwaọrụ dị n'akụkụ bụ isi iyi ọkụ.
Ntụnye mgbago na-abụghị nhazi ọkọlọtọ ma ọ bụ na-arụ ọrụ n'okpuru ọnọdụ okpomọkụ dị elu nwere ike ịbawanye okpomoku akụrụngwa nke dị n'ime ma ga-achọkwa de-rating na mmepụta ugbu a.

Ogo dị ugbu a nke eriri isi/secondary akwadoro kwesịrị ịdị ukwuu karịa ma ọ bụ ha nhata na nke unit ahụ. Biko rụtụ aka na nkọwapụta ya.
Maka ndị ọkwọ ụgbọ ala LED nwere njikọ mmiri na-adịghị, chọpụta na njikọ dị n'etiti unit na ihe ọkụ ọkụ na-esi ike ka mmiri ghara ịbanye n'ime usoro ahụ.

N'ihi na dimmable LED ọkwọ ụgbọala, jide n'aka na gị dimming njikwa bụ ike ịkwọ ụgbọala ndị a nkeji.PWM usoro chọrọ 0.15mA ọ bụla unit.
Tc max. achọpụtara na akara ngwaahịa. Biko hụ na okpomọkụ nke Tc point agaghị agafe oke.

Ejikọkwala "DIM- na Vo-".
Kwesịrị ekwesị maka ojiji ime ụlọ ma ọ bụ n'èzí na-enweghị ìhè anyanwụ kpọmkwem. Biko zere imikpu n'ime mmiri ihe karịrị nkeji iri atọ.
A na-ewere ọkụ ọkụ ahụ dị ka akụkụ nke a ga-arụ ọrụ na ngwongwo ikpeazụ. Ebe ọ bụ na nrụnye zuru ezu ga-emetụta arụmọrụ EMC, ndị na-emepụta akụrụngwa ikpeazụ ga-emezigharị Ntuziaka EMC na nrụnye zuru ezu ọzọ.

Akwụkwọ ntuziaka onye ọrụ

Akwụkwọ / akụrụngwa

MW PW M -90 usoro Constant Voltagna PWM Output LED Driver [pdf] Akwụkwọ ntuziaka onye nwe
Usoro PW M -90 Constant Voltage PWM Output LED Driver, PW M -90 series, Constant Voltage PWM Output LED Driver, Output LED Driver

Ntụaka

Akwụkwọ ntuziaka onye ọrụ

MW PW M -90 usoro Constant Voltagna PWM Output LED Driver

Atụmatụ

Ngwa

Nkọwa