Karịa naanị ike.™
Usoro FDV kacha
Nnyenye ike abụọ
Nweta ndị njikwa ike (PTC)
Kachasị FDV Series Dual Ike Nweta ike njikwa
Elsdị gụnyere:
Oke11FDV
- Ike 1: 12VDC @ 3.3A ma ọ bụ 24VDC @ 3.6A.
- Ike 2: 12VDC @ 3.3A ma ọ bụ 24VDC @ 3.6A.
– Mpụta iri na isii (16) PTC echedoro.
Oke33FDV
- Ike 1: 12VDC @ 5.3A ma ọ bụ 24VDC @ 5.6A.
- Ike 2: 12VDC @ 5.3A ma ọ bụ 24VDC @ 5.6A.
– Mpụta iri na isii (16) PTC echedoro.
Oke55FDV
- Ike 1: 12VDC @ 9.3A.
- Ike 2: 12VDC @ 9.3A.
– Mpụta iri na isii (16) PTC echedoro.
Oke75FDV
- Ike 1: 12VDC @ 9.3A.
- Ike 2: 24VDC @ 9.6A.
– Mpụta iri na isii (16) PTC echedoro.
Oke77FDV
- Ike 1: 24VDC @ 9.6A.
- Ike 2: 24VDC @ 9.6A.
– Mpụta iri na isii (16) PTC echedoro.
Ntuziaka nwụnye
Mkpu DFDV031115
Karịa naanị ike.
Ụlọ ọrụ na-etinye: __________ Onye nnọchi anya ọrụ: _____________ Adreesị: ___ Ekwentị #: _______
MaximalFDV Series gafereview:
Altronix MaximalFDV Access Power/Controllers na-ekesa ma gbanwee ike iji nweta sistemụ njikwa na ngwa. Ha na-atụgharị 220VAC (nke na-arụ ọrụ 198VAC - 256VAC), ntinye 50/60Hz n'ime iri na isii (16) na-achịkwa onwe ya 12VDC ma ọ bụ 24VDC PTC. A na-arụ ọrụ mmepụta ihe site na sink na-emeghe ma ọ bụ na-emeghe (NO) akọrọ ọkpọkọ ntinye sitere na Access Control System, Card Reader, Keypad, Push Button, PIR, etc. Units ga-ebuga ike na ngwaọrụ dị iche iche nke njikwa ngwaike gụnyere Mag mkpọchi, Electric Strikes, Magnetic Door Holders, wdg. Mpụta ga-arụ ọrụ na ma ọdịda-adịghị mma na / ma ọ bụ ọdịda mode. Interface FACP na-enyere mgbapụ ihe mberede, na nlekota mkpu, ma ọ bụ enwere ike iji kpalite ngwaọrụ inyeaka ndị ọzọ. A na-ahọrọ njirimara nkwụsị ọkụ ọkụ n'otu n'otu maka ihe ọ bụla ma ọ bụ niile nke asatọ (8).
Chart nhazi usoro MaximalFDV:
| Altronix Nọmba nlereanya |
Ntinye DC nke aha Voltage Nhọrọ | Ọnụnọ kacha ugbu a maka Main na Aux. Nsonaazụ (Ike Nkwanye 1 / Nnyefe ike 2) (A) |
PTC echekwara Mbupute na-emegharị onwe ya |
Ntinye 220VAC 50/60 Hz (ugbu a) |
Ihe mmepụta ACMEICB dị ugbu a (A) | Ngosipụta Fuse Board na-enye ike | Ngosipụta ọkụ na-enye bọọdụ ike batrị fuse | |||||||
| Tụkwasịnụ Ike 1 | Tụkwasịnụ Ike 2 | |||||||||||||
| [DC] | [MIX] | [DC] | [AUX] | |||||||||||
| 12VDC mmepụta Oke (V) |
24VDC mmepụta Oke (V) |
12VDC mmepụta Oke (V) |
24VDC mmepụta Oke (V) |
12VDC mmepụta Oke (V) |
24VDC mmepụta Oke (V) |
12VDC mmepụta Oke (V) |
24VDC mmepụta Oke (V) |
|||||||
| Maxima111FDV | eFlow4NBV | eFIow4NBV | 16 | 4.2A | 3. | 5N 250V |
7.5A / 32V |
|||||||
| 9.8- 13.2 |
- | 10.05- 132 |
- | 9.8- 13.2 |
- | 10.05- 13.2 |
_ | 3.3A + 3.3A |
||||||
| 9.8- 13.2 |
- | 10.05- 13.2 |
19.9- 26.4 |
20.2- 26.4 |
3.3A + 3.6A |
|||||||||
| - | 19.9- 26.4 |
- | 20.2- 26.4 |
- | 19.9- 26.4 |
- | 20.2- 26.4 |
3.6A + 3.6A |
||||||
| Oke33FDV | eF1ow6NBV | eFIow6NBV | 16 | 4.2A | 3. | 5N 250V |
10A / 32V |
|||||||
| 9.7- 13.2 |
- | 10.03- 13.2 |
- | 9.7- 13.2 |
- | 10.03- 13.2 |
_ | 5.3A + 5.3A |
||||||
| 9.7_ 13.2 |
- | 10.03- 13.2 |
19.8- 26.4 |
20.19- 26.4 |
5.3A + 5.6A |
|||||||||
| - | 19.8- 26.4 |
- | 20.19- 26.4 |
- | 19.8- 26.4 |
- | 20.19- 26.4 |
5.6A + 5.6A |
||||||
| Oke55FDV | eFlow102NBV | eFlow102NBV | 9.3A a3A + | 16 | 4.2A | 3. | 5A / 250 V |
156/ 32V |
||||||
| 9.7- 13.2 |
- | 10.03- 13.2 |
- | 9.7- 13.2 |
_ | 10.03- 13.2 |
- | |||||||
| Maxima175FDV | eFlow102NBV | eFlow104NBV | 9.3A + 9.6A |
16 | 4.8A 5A/250V |
3. | (eFlow102N8V) 6.3N250V (eFlow104NBV) |
15A / 324 |
||||||
| 9.7- 13.2 |
- | 10.03- 13.2 |
19.8- 26.4 |
20.28- 26.4 |
||||||||||
| Maxima177FDV | eFlow104NBV | eFlow104NBV | 9.6A+ 9.6A |
16 | 5.4A | 3. | 6.3N250V | 15N 32V |
||||||
| - | 19.8- 26.4 |
- | 20.28- 26.4 |
- | 19.8- 26.4 |
- | 20.28- 26.4 |
|||||||
Nkeji niile: Nkeji ndị a dabara maka ike: sensọ, na ngwaọrụ eletrọnịkị (dịka mgbawa ọnụ ụzọ eletrik).
Njirimara usoro kachasị elu:
ACM8CB modul njikwa ike ịnweta ike:
- Iri na isii (16) na-ebute nsonaazụ a na-achịkwa n'onwe ya. Nhọrọ mmepụta:
a) Iri na isii (16) mpụta ike nzacha nke dara ada.
b) Iri na isii (16) Nwepụta ike nzacha nke ọma.
c) Ngwakọta ọ bụla nke dị n'elu. - Iri na isii (16) Ntinye njikwa sistemụ na-akpalite ntinye. Nhọrọ ịkpalite ntinye:
a) Iri na isii (16) na-emeghekarị (MHỤKWU) ntinye mkpali akọrọ.
b) Ntinye iri na isii (16) ghe oghe.
c) Ngwakọta ọ bụla nke dị n'elu. - Iri na isii (16) aux agbachabeghị. mmepụta ike (a na-edepụta mmepụta @ 2.5A).
- Igwe ọkụ na-acha uhie uhie na bọọdụ ACM8CB na-egosi na a na-ebute nsonaazụ nke onye ọ bụla (gbanye ọkụ).
- Mwepu mkpu oku ọkụ (latching ma ọ bụ enweghị nkwụsị) bụ nke a na-ahọrọ n'otu n'otu maka ihe ọ bụla ma ọ bụ niile nke iri na isii (16).
Nhọrọ ntinye ihe mgbanye mgbanyụ ọkụ:
a) Ndenye mkpalite akọrọ na-emepe nke ọma (MENWEE) ma ọ bụ mechiri emechi (NC).
b) Ntinye ngbanwe polarity sitere na sekit mgbama FACP. - Green LED na bọọdụ ACM8CB na-egosi nkwupu FACP kpalitere.
- Mgbasa ozi FACP na-egosi na etinyere FACP.
- EFlow Power Supply/Chaja na-enye ike nkịtị maka bọọdụ ACM8CB (wiring ụlọ ọrụ) yana ngwaọrụ njikwa ohere niile ejikọrọ (wiring ubi).
- ACM8CB bọọdụ isi fuses ka akara @ 10A. A na-edepụta PTCs @ 2.5A.
Nbunye/ịchaja eFlow:
- Ntinye: 220VAC, 50/60Hz.
- Maka mmepụta voltage na inye ugbu a na-ezo aka na MaximalFDV usoro nhazi Chart, pg. 3.
- Enyere nsonye inyeaka @ 1A (anaghị agbanwe agbanwe).
- Mfefetage nchedo.
- Chaja arụnyere maka batrị lead acid ma ọ bụ ụdị gel nwere akara.
- Ọnụ ego kachasị ugbu a 1.54A.
- Gbanwee akpaaka ka batrị nọrọ na-echere mgbe AC dara. Nyefee na ike batrị na-echere bụ ozugbo na enweghị nkwụsị.
- Ikwupu mkpu ọkụ ọkụ na-elekọta (latching ma ọ bụ enweghị ike) 10K EOL resistor. Na-arụ ọrụ na ihe mkpalite na-emepe emepe (NO) ma ọ bụ mechiri emechi (NC).
- AC dara nlekota (ụdị kọntaktị "C").
- Batrị dara na nlekọta ọnụnọ (ụdị kọntaktị "C").
- Nkwụsị ike dị ala. Na-emechi ọnụ ụzọ mmepụta DC ma ọ bụrụ na batrị voltage tụlee n'okpuru 71-73% maka 12V nkeji na 70-75% maka 24V nkeji (dabere na ike ọkọnọ). Na-egbochi mmịpụ batrị miri emi.
- Maka ọkwa fiusi rụtụ aka na Chart nhazi usoro MaximalFDV, pg. 3.
- Green AC Power LED na-egosi 220VAC dị ugbu a.
- Ntinye AC na ihe ngosi LED nke DC.
- Mkpirisi sekit na oke nchebe.
- Mkpọchi na-anabata ihe ruru batrị anọ (4) 12VDC/12AH.
Akụkụ mkpuchi (H x W x D): 26" x 19" x 6.25" (660.4mm x 482.6mm x 158.8mm).
Ntuziaka nrụnye kachasị FDV:
Ụzọ wiwi ga-adị n'ụzọ kwekọrọ na National Electric Code/NFPA 70/ANSI, Canadian Electric Code, Part I, Part II, yana koodu mpaghara na ndị ọchịchị niile nwere ikike. Ezubere ngwaahịa maka naanị ime ụlọ.
| Nchọpụta Ọkụ Ọkụ Na-enye Ike LED Diagnostics | (pg. 7) |
| Ịnweta ihe nleba anya nke ọkụ ọkụ LED | (pg. 7) |
| Ngosipụta njedebe Board Supply Board | (pg. 7) |
| Nweta njirimara njedebe onye njikwa ike | (pg. 8) |
| Nkọwapụta batrị na-akwado bọọdụ na-eweta ike | (pg. 8) |
| Mpụta Board Na-enye Ike Voltage Ntọala | (pg. 9) |
| Nweta eserese ngwa ngwa njikwa ike | (pg. 9) |
| Eserese FACP/Nhọrọ inye nkonye ike | (pg. 12) |
- Wunye unit n'ebe achọrọ. Kaa akara na prerill oghere na mgbidi ka kwụ n'ahịrị n'ahịrị igodo atọ dị n'elu n'ogige ahụ. Wụnye ihe nkwụnye elu atọ na kposara na mgbidi na isi ihe nkedo na-apụta. Tinye oghere igodo elu nke ogige ahụ n'elu skru atọ dị elu, ọkwa, na nchekwa. Kaa akara ọnọdụ nke oghere atọ dị ala. Wepu ihe mkpuchi ahụ. Gwuo oghere ndị dị ala ma wụnye ngwa ngwa atọ. Tinye oghere igodo elu nke ogige ahụ n'elu skru atọ dị elu. Wụnye skru atọ dị ala ma jide n'aka na ị ga-eme ka skru niile sie ike (Mpaghara mkpuchi, pg. 15).
- Jikọọ ike AC akwụghị ụgwọ (220VAC 50/60Hz) na njedebe akara [L, N] (Fig 3, pg. 10). Jiri 14 AWG ma ọ bụ karịa maka njikọ ike niile. Ekwentị green waya na-eduga na ala ala lug. Debe wiwi nwere oke ike na wiwi enweghị oke. Opekempe 0.25 ″ ga-abụrịrị
enyere (Fig 3, pg. 10).
kpachara anya: Emetụla akụkụ ọla ndị ekpughere ekpughere aka. Mechie ike sekit alaka ụlọ ọrụ tupu ịwụnye ma ọ bụ na-arụ ọrụ. Enweghị akụkụ ndị ọrụ ga-arụ ọrụ n'ime. Tụtụ aka na nrụnye na ọrụ nye ndị ọrụ ruru eru. - Họrọ mmepụta DC chọrọ voltage site n'itinye SW1 n'ọnọdụ kwesịrị ekwesị na ọkụ ọkụ na Maximal11FDV na Maximal33FDV, (Fig. 1, pg. 9). Maximal55FDV ike ọkọnọ bụ ụlọ ọrụ atọrọ na 12VDC. Maximal77FDV ike ọkọnọ bụ ụlọ ọrụ atọrọ na 24VDC. Maximal75FDV nwere otu bọọdụ ọkụ na-enye ọkụ nke edobere na 1VDC, yana otu (12) bọọdụ ọkọnọ ike nke edobere na 1VDC.
- Tule mmepụta voltage nke unit tupu ijikọ ngwaọrụ ọ bụla iji hụ na arụ ọrụ kwesịrị ekwesị.
Na-ezighi ezi ma ọ bụ elu voltage ga-emebi ngwaọrụ ndị a. - Nhọrọ mmepụta (Fig. 2, pg. 9):
Ngalaba ahụ ga-enye ma ọ bụ iri na isii (16) mpụta ike gbanwere, iri na isii (16) ụdị akọrọ "C" pụta, ma ọ bụ ihe ọ bụla ngwakọta nke ma gbanwee ike na ụdị "C" pụta.
(a) Mbupute ọkụ agbanweela nke ọma:
Maka arụmọrụ Fail-Safe jikọọ ndenye dị mma (+) nke ngwaọrụ njikwa ohere na njedebe akara [NC]. Jikọọ ntinye adịghị mma (-) nke ngwaọrụ njikwa ohere na njedebe akara [COM].
(b) Mbupute ọkụ agbanweela nke dara ada:
Maka ọrụ Fail-Secure jikọọ ndenye dị mma (+) nke ngwaọrụ njikwa ohere na njedebe akara [NO]. Jikọọ ntinye na-adịghị mma (-) nke ngwaọrụ njikwa ohere na njedebe akara [COM]. - Ihe nrụpụta ike inyeaka ACM8CB (anaghị agbanwe agbanwe):
Jikọọ ngwaọrụ njikwa ohere nke chọrọ ike mgbe niile na njedebe akara [C] nti (+) na [COM] adịghị mma (-).
Nsonaazụ inyeaka eFlow (anaghị agbanwe):
Maka njikọ ngwaọrụ inyeaka agaghị emetụta mmepụta a site na nkwụsị ọkụ dị ala ma ọ bụ mkpu ọkụ
Interface. Jikọọ ngwaọrụ na njedebe akara [+ AUX -] (Fig. 3, pg. 10). - Nhọrọ ntinye ntinye (Fig. 2, pg. 9):
(a) Na-emepekarị mkpalite ntinye [NO]:
Ntinye 1-8 na-arụ ọrụ site na ntinye sink na-emeghe ma ọ bụ nke mepere emepe. Jikọọ ntinye njikwa njikwa ohere, ahụigodo, bọtịnụ ntinye, REX PIRs, wdg na njedebe akara [IN] na [GND].
(b) Mepee ihe ntinye ihe mkpokọ mkpokọta:
Jikọọ ogwe njikwa ohere mepere onye na-anakọta sink positive (+) na ọdụ akara akara [IN] yana nke ọjọọ (-) na njedebe akara [GND]. - Nhọrọ Interface Oti mkpu ACM8CB (Figs. 5-9, pg. 12):
Ntinye ntinye nke emechiri emechi [NC] ma ọ bụ nke na-emeghe [NO] site na ogwe njikwa ọkụ ma ọ bụ ndenye ngbanwe polarity sitere na sekit mgbama FACP ga-emetụta nsonaazụ ahọpụtara. Iji mee ka FACP kwupu maka mmepụta, gbanye mgba ọkụ kwekọrọ na bọọdụ ACM1CB ọ bụla. Iji gbanyụọ nkwụsị FACP maka mmepụta, gbanye mgba ọkụ kwekọrọ na bọọdụ ACM8CB ọ bụla.
(a) Ntinye [NO] na-emepe nke ọma:
Maka nko-elu na-adịghị ejigide na-ezo aka na Fig. 6, pg. 12. N'ihi na latching nko-elu na-ezo aka na Fig. 7, pg. 12.
(b) Ntinye [NC] na-emechikarị:
Maka nko-elu na-adịghị ejigide na-ezo aka na Fig. 8, pg. 12. N'ihi na latching nko-elu na-ezo aka na Fig. 9, pg. 12.
(c) FACP mgbama mgbanye mgbanye mgbanye sekit:
Jikọọ ihe dị mma (+) na nke na-adịghị mma (-) site na mmepụta sekit mgbama FACP na njedebe akara [+ INP -]. Jikọọ FACP EOL na njedebe akara [+ RET -] (a na-ezo aka na polarity na ọnọdụ mkpu). Jumper dị n'akụkụ TRG LED ga-ebipụ (Fig 2a, pg. 9 na Fig. 6, pg. 12). - Ụdị akọrọ FACP “C” mmepụta (UL anaghị enyocha ya) (Fig. 2b, pg. 9):
Enwere ike iji kọntaktị ụdị FACP "C" kpalite mkpesa ma ọ bụ ngwaọrụ mgbaàmà. Kọntaktsị ndị a na-agbanye na ntinye oti mkpu ọkụ na bọọdụ ACM8CB. - Njikọ batrị guzoro n'akụkụ (Fig. 3, pg. 10):
Maka ngwa njikwa nnweta US batrị bụ nhọrọ. Achọrọ batrị maka nrụnye Canada (ULC-S319). Mgbe ejighị batrị, mfu nke AC ga-ebute mfu nke mmepụta voltage. Mgbe achọrọ iji batrị na-echere, ha ga-abụrịrị acid acid ma ọ bụ gel ụdị. Jikọọ batrị na njedebe akara [- BAT +] (Fig 3, pg. 10). Jiri batrị abụọ (2) 12VDC ejikọrọ n'usoro maka ọrụ 24VDC (edu batrị gụnyere). Jiri batrị - Castle CL1270 (12V / 7AH), CL12120 (12V / 12AH), CL12400 (12V / 40AH), CL12650 (12V / 65AH) batrị ma ọ bụ UL ghọtara batrị BAZR2 na BAZR8 nke ọkwa kwesịrị ekwesị. - Ihe nrụpụta batrị na AC (Fig 3, pg. 10):
Ọ chọrọ ijikọ ngwaọrụ nlekọta mkpesa nsogbu na mpụta akara [AC Fail, BAT Fail] na nrụgharị relay akara [NC, C, NO] na ngwaọrụ ngosi ngosi kwesịrị ekwesị. Jiri 22 AWG ruo 18 AWG maka ọdịda AC yana obere mkpesa batrị. - Iji gbuo oge mkpesa AC maka awa 2, tọọ mgbanwe DIP [AC Delay] ka ọ bụrụ ọnọdụ gbanyụọ (Fig 3, pg. 10).
Iji gbuo oge mkpesa AC maka 1 min., tọọ mgbanwe DIP [AC Delay] na ọnọdụ ON (Fig 3, pg. 10). - Nkwụsị ike dị ala (Fig 3, pg. 10):
Iji mee ka nkwụsị nrụpụta dị ala, tọọ mgba ọkụ DIP [Mkpuchi] ka ọ bụrụ ọnọdụ ON.
Iji gbanyụọ mmechi nrụpụta dị ala, tọọ mgba ọkụ DIP ka ọ bụrụ ọnọdụ gbanyụọ. - Ntinye nke tamper mgba ọkụ (anaghị etinye ya) (Fig. 3a, pg. 10):
Ugwu UL Edepụtara tamper mgba ọkụ (Honeywell nlereanya 112 ma ọ bụ dakọtara) n'elu nke ogige. Gbanye tamper mgbanaka nkwado n'elu nsọtụ nke ogige ahụ dịka 2" site n'akụkụ aka nri (Fig. 3a, pg. 10). Jikọọ tampgbanwee wiring gaa na ntinye Ogwe njikwa nnweta ma ọ bụ ngwaọrụ mkpesa UL Edepụtara kwesịrị ekwesị. Iji mee ka mgbaama mkpu rụọ ọrụ, mepee ọnụ ụzọ nke ogige ahụ. - Ọtụtụ ntinye ọkụ ọkụ (Fig. 2, pg. 9):
Mgbe ị na-eji mgbakwunye ike mpụga Edepụtara, ndị jumpers J1 na J2 dị na bọọdụ ACM8CB kwekọrọ ga-ebipụ (Fig 2c, pg. 9 na Fig. 5, pg. 12). Jikọọ mpụga Edepụtara ikike njikwa ohere nwere oke ike na ọdụ akara akara [- Control +] (Nkwụsị ndị a na-adakọ na ọdụ [- Power +]). Mgbe ị na-eji akụrụngwa ọkụ DC, a ga-ahụrịrị polarity. Mgbe ị na-eji ọkụ ọkụ AC, ekwesighi ịhụ polarity (Fig 2d, pg. 9). A ghaghị ime njikọ wiring ubi niile na-eji waya CM ma ọ bụ FPL nwere jaket dabara adaba (ma ọ bụ ihe dochie anya) (Fig. 4a, pg. 11).
Nlekọta:
A ga-anwale nkeji opekata mpe otu ugboro n'afọ maka ịrụ ọrụ kwesịrị ekwesị dịka ndị a:
Nlekọta FACP:
Iji hụ na njikọ kwesịrị ekwesị na ịrụ ọrụ nke nkwụnye nkwụnye ọkụ ọkụ.
Biko soro usoro kwesịrị ekwesị n'okpuru:
Ntinye na-emepe emepe:
Ịtụnye ntakịrị n'etiti ọnụ ụzọ akara [T] na [+ INP] ga-akpalite
Kwupu oti mkpu ọkụ. Wepu mkpụmkpụ ka ịtọgharịa.
Ntinye na-emechikarị:
Iwepu waya site na akara akara [INP –] ga-akpalite Mkpu ọkụ
Kwupu njikọ. Dochie waya ka ọ bụrụ akara akara [INP –] ka ịtọgharịa.
Ntinye sekit mgbama FACP:
Ọ dị mkpa ịkpalite Sistemụ Mkpu ọkụ. N'ọnọdụ niile dị n'elu, TRG LED nke ACM8CB ga-enwu gbaa. Nsonaazụ niile ahọpụtara maka Mwepu Mkpuchi Mkpuchi Ọkụ ga-eme ka mwepụta ngwaọrụ mkpọchi rụọ ọrụ.
Mara: Nsonaazụ niile [OUT 1] - [OUT 8] ga-abụrịrị n'ọnọdụ nkịtị (na-agwụ ike) tupu anwale. Mgbe a na-ahazi unit ahụ maka Mepee Nkịtị (Fig 8, pg. 12) ma ọ bụ na-emechikarị (Fig 10, pg. 12) arụ ọrụ latching, ọ dị mkpa iji tọgharịa Mkpuchi Mkpuchi Ọkụ site na ịgbalite Nrụgharị Nrụgharị emechikarị.
Mmepụta Voltage nwale:
N'okpuru ọnọdụ ibu nkịtị, mmepụta DC voltage kwesịrị ịlele nke ọma voltage larịị (tụ aka na MaximalFDV usoro nhazi Chart, pg. 3).
Nnwale batrị:
N'okpuru ọnọdụ ibu nkịtị lelee na chajịrị batrị nke ọma, wee lelee volta ahụ akọwapụtaratage na ọdụ batrị yana na bọọdụ akara akara [+ BAT -] iji hụ na enweghị nkwụsịtụ na wires njikọ batrị.
Mara:
Ọnụ ego kachasị ugbu a bụ 1.54A. Ndụ batrị tụrụ anya bụ afọ 5; Otú ọ dị, a na-atụ aro ka ịgbanwe batrị n'ime afọ 4 ma ọ bụ obere ma ọ bụrụ na ọ dị mkpa.
Nchọpụta Ọkụ Ọkụ Na-eweta Ike LED Diagnostics:
| Uhie (DC) | Green (AC/AC1) | Ọkwa inye ike |
| ON | ON | Ọnọdụ ọrụ nkịtị. |
| ON | Gbanyụọ | Mfu nke AC. Batrị echere na-enye ike. |
| Gbanyụọ | ON | Enweghị mmepụta DC. |
| Gbanyụọ | Gbanyụọ | Mfu nke AC. Achụpụrụ ma ọ bụ enweghị batrị na-echere. Enweghị mmepụta DC. |
| Uhie (Bat) | Ọnọdụ batrị |
| ON | Ọnọdụ ọrụ nkịtị. |
| Gbanyụọ | Batrị faiVlow batrị. |
Nchọpụta Ọkụkụ nke Onye njikwa ike nweta:
| Ikanam | ON | Gbanyụọ |
| LED 1-Ikanam 8 (Uhie) | Mbupute relay (s) na-enye ike. | Mgbasa ozi (s) arụpụtaghị ike. |
| Trg (Green) | Ntinye FACP kpalitere (ọnọdụ mkpu). | FACP nkịtị (ọnọdụ enweghị mkpu). |
Nkọwapụta batrị na bọọdụ na-eweta ike:
| Batrị | Maxima111FDV | Maxima133FDV | Maxima155FDV, Maxima175FDV na Maxima177FDV |
| 7 AH | Nkeji 30/4A | Nkeji 10/6A | Nkeji 5/10A |
| 12 AH | Nkeji 35/4A | Nkeji 30/6A | Nkeji 30/10A |
| 40 AH | Ihe karịrị awa 4 / 4A | Ihe karịrị awa 4 / 6A | Ihe karịrị awa 2 / 10A |
| 65 AH | Ihe karịrị awa 4 / 4A | Ihe karịrị awa 4 / 6A | Ihe karịrị awa 4 / 10A |
* Naanị nhazi ndị a ka enwere ike iji na nrụnye Canada.
Ngosipụta ngwụcha Board Supply Power:
| Akụkọ Mgbe Ebighị Ebi | Ọrụ/Nkọwa |
| L, N | Jikọọ 220VAC, 50/60Hz na njedebe ndị a: L na-ekpo ọkụ, N na-anọpụ iche. Ejila akara njedebe [G]. |
| + DC — | Ụlọ ọrụ ejikọrọ na bọọdụ ACM8CB. |
| Mkpali EOL A na-elekọta |
Ọkụ mkpu Interface na-akpalite ntinye site na mkpụmkpụ ma ọ bụ FACP. Ntinye ntinye nwere ike imeghe nke ọma, na-emechikarị ya site na sekit mmepụta FACP (Fig 3, pg. 10). |
| Mba, GND Tụgharịa |
FACP interface latching ma ọ bụ enweghị nkedo (Fig 3, pg. 10). |
| + AUX — | Mpụta nwere oke ike inyeaka nyere akara @ 1 A (anaghị agbanwe agbanwe) (Fig 3, pg. 10). |
| AC ada NC, C, Mba |
Na-egosi mfu nke ike AC, dịka ọmụmaatụ jikọọ na ngwaọrụ a na-anụ ma ọ bụ ogwe mkpu. A na-enyekarị ọkụ ọkụ mgbe ike AC dị. Nkọwa kọntaktị 1A 0 30VDC (Fig 3, pg. 10). |
| ỤDỊ Ụgha NC, C, Mba |
Na-egosi ọnọdụ batrị dị ala, dịka ọmụmaatụ jikọọ na panel mkpu. A na-enyekarị ike ịgbagharị agbagharị mgbe ike DC dị. Ogo kọntaktị 1A 0 30VDC. A na-akọ batrị ewepụrụ n'ime nkeji ise. A na-akọ njikọghachi batrị n'ime nkeji 5 (Fig 1, pg. 3). |
| + BAT — | Njikọ batrị kwụrụ ọtọ. Ọnụ ego kachasị dị ugbu a 1.54A (Fig 3, pg. 10). |
Nweta njirimara njedebe onye njikwa ike:
| Akụkọ Mgbe Ebighị Ebi | Ọrụ/Nkọwa | ||
| - Ike + | 12VDC ma ọ bụ 24VDC si ike ọkọnọ/ chaja Ndị a ọnụ na-yiri na |
(ụlọ ọrụ [- Njikwa +] |
ejikọrọ). ọnụ ọnụ. |
| - Njikwa + | Ndị a ọnụ na-yiri na Enwere ike ijikọ ọnụ ọnụ ndị a ọkọnọ ike iji nye ọrụ dịpụrụ adịpụ A ga-ewepụrịrị jumpers J1 na J2. |
[- Ike +] ọnụ ọnụ. njikwa ohere nwere oke ike edepụtara na mpụga ike maka ngwaọrụ (UL anaghị enyocha ya). |
|
| Mgbakwunye 1- Ntinye 8 IN, GND |
Site na ntinye na-emepe emepe na/ma ọ bụ meghere ihe ntinye ihe na-emepe onye na-anakọta ihe (rịọ ka ịpụ bọtịnụ, ọpụpụ pir, wdg) | ||
| Mpụta 1- Mbupute 8 NC, C, NO, COM |
12VDC ruo 24VDC na-akpalite nsonaazụ a na-achịkwa. Ibu kacha kwa mmepụta bụ 2.5A. | ||
| Oke kacha 1 FTV: P/S 1 – 9.8-13.2VDC 0 3.3AP/S 2 – 9.8-13.2VDC 0 3.3A ma ọ bụ P/S 1 – 19.9-26.4VDC 0 3.6AP/S 2 – 19.9- ma ọ bụ 26.4 PDC 0-3.6VDC 1-9.8VDC @ 13.2A na P/S 3.3 - 2-19.9VDC 26.4 0A. | |||
| Maxima133FDV: P/S 1 – 9.7-13.2VDC 0 5.3AP/S 2 – 9.7-13.2VDC @ 5.3A ma ọ bụ P/S 1 – 19.8-26.4VDC 0 5.6AP/S 2 – 19.8-26.4VDC 0 5.6A ma ọ bụ P/S 1 – 9.7-13.2VDC 0 5.3A na P/S 2 – 19.8-26.4VDC @ 5.6A. |
|||
| Maxima155FDV: P/S 1 – 9.7-13.2VDC @ 9.3A na P/S 2 – 9.7-13.2VDC 0 9.3A. | |||
| Maxima175FDV: P/S 1 – 9.7-13.2VDC @ 9.3A na P/S 2 – 19.8-26.4VDC @ 9.6A. | |||
| Maxima177FDV: P/S 1 – 19.8-26.4VDC 0 9.6A na P/S 2 – 19.8-26.4VDC @ 9.6A. | |||
| Ọdịda-Safe [NC positive (+) & COM Negative (-)], Fail-Secure [NO positive (+) & COM Negative (-)], ihe enyemaka [C positive (+) & COM Negative (-)]. Mgbe ị na-eji AC ike ọkọnọ, ekwesighi ịhụ polarity. Egosiri kọntaktị na steeti anaghị akpalite. | |||
| FACP INTERFACE T, + ntinye — |
Ọkụ mkpu Interface na-akpalite ntinye sitere na FACP. Mkpali na-emechikarị site na mmepụta sekit mgbama FACP |
ntinye nwere ike na-emeghe nke ọma, (Fig. 5-9, pg. 12). |
|
| FACP INTERFACE NC, C, Mba |
Ụdị kọntaktị relay “C” nwere akara @ 1 A 28VDC maka mkpesa mkpu. | ||
Mpụta Board Na-enye Ike Voltage Ntọala:
Nweta eserese ngwa ngwa njikwa ike (maka ACM8CB ọ bụla):
Fig. 3 - Nke kachasi FDV Series
kpachara anya: Mgbe edobere bọọdụ ọkọnọ ike maka 12VDC jiri naanị otu (1) 12VDC nọrọ na batrị. Debe wiwi nwere oke ike na enweghị oke. Jiri ohere kacha nta 0.25 inch. Batrị 12AH nwere ike ịgbanye bụ batrị kachasị ukwuu nwere ike dabara na ogige a. Ekwesịrị iji mkpuchi batrị mpụga edepụtara UL ma ọ bụrụ na ị na-eji batrị 40AH ma ọ bụ 65AH.
Achọrọ Wiring nwere oke ike NEC:
Wiring sekit nwere oke na enweghị ike ga-anọrịrị iche na kọbọd. Waịkọ sekit niile nwere oke ike ga-adịrịrị opekata mpe 0.25” pụọ na wiwi sekit ọ bụla na-enweghị oke. Ọzọkwa, eriri sekit niile nwere oke ike na eriri sekit na-enweghị ike ga-abanye ma pụọ na kabinet site na ụzọ dị iche iche. Otu dị otú ahụ exampE gosipụtara nke a n'okpuru. Ngwa gị akọwapụtara nwere ike ịchọ ka a ga-eji mkpọpu ikuku dị iche iche. Enwere ike iji ọkpọ ọkpọ ọ bụla mee ihe. Maka ngwa nwere oke ike, iji conduit bụ nhọrọ. A ga-emerịrị njikọ wiwi ubi niile na-eji waya CM ma ọ bụ FPL nwere jaket dabara adaba (ma ọ bụ ihe dochie ya). A ga-etinyerịrị ebe nchekwa batrị UL edepụtara n'akụkụ ọkụ ọkụ site na usoro wiring Class 1. Maka nrụnye Canada na-eji wiwi mkpuchi mkpuchi maka njikọ niile.
Mara: Rụtụ aka na eserese njikwa waya dị n'okpuru maka ụzọ kwesịrị ekwesị isi tinye waya CM ma ọ bụ FPL nwere jaketị (Fig 4a).
Eserese FACP Hook Up:
ndetu:
Akụkụ Mkpuchi (H x W x D ihe ruru):
26" x 19" x 6.25" (660.4mm x 482.6mm x 158.8mm)
Enwere ike ijikwa ma nyochaa ike na-ebunye / chaja eFlow ka ị na-akọpụta ike / nchọpụta sitere na ebe ọ bụla karịa netwọkụ…
LINQ™
LINQ2 - Module Nkwukọrịta netwọkụ
LINQ2 na-enye ohere IP dịpụrụ adịpụ ịnweta data ozugbo sitere na eFlow ike ọkọnọ / chaja iji nyere aka mee ka sistemụ na-arụ ọrụ na ọkwa kachasị mma. Ọ na-eme ka nrụnye ngwa ngwa ma dị mfe na nhazi, na-ebelata oge nkwụsị nke usoro, ma kpochapụ oku ọrụ na-adịghị mkpa, nke na-enyere aka belata ngụkọta ọnụ ahịa nke ihe onwunwe (TCO) - yana ịmepụta isi iyi ọhụrụ nke Recurring Monthly Revenue (RMR).
Atụmatụ:
- Edepụtara UL na US na Canada.
- Njikwa mpaghara ma ọ bụ nke dịpụrụ adịpụ ruo (2) mmepụta ike Altronix eFlow abụọ site na LAN na/ma ọ bụ WAN.
- Nyochaa nyocha nyocha ozugbo: DC mmepụta voltage, mmepụta ugbu a, AC & batrị ọnọdụ/ọrụ, ntinye ihe na-akpalite mgbanwe steeti, mgbanwe ọnọdụ mmepụta, na ọnọdụ okpomọkụ.
- Njikwa ohere na njikwa onye ọrụ: Machibido ịgụ/dee, machibido ndị ọrụ na akụrụngwa akọwapụtara
- Ụdị netwọọkụ abụọ (2) na-achịkwa Ụdị "C" Relays.
- Ihe ntinye atọ (3) nwere ike ime mmemme: njikwa relays na ike ọkụ site na isi mmalite ngwaike mpụga.
- Ozi email na Windows Dashboard
- ndekọ ihe omume na-edekọ akụkọ ihe mere eme.
- Secure Socket Layer (SSL).
- Enwere ike ime ya site na USB ma ọ bụ web ihe nchọgharị – gụnyere ngwanrọ na-arụ ọrụ na eriri USB ft. 6.
LINQ2 na-agbago n'ime ogige MaximalF ọ bụla
Oke11FDV/33FDV/55FDV/75FDV/77FDV Usoro nrụnye ntuziaka
Altronix abụghị maka mmejọ ederede ọ bụla.
140 58th Street, Brooklyn, New York 11220 USA | ekwentị: 718-567-8181 | faksị: 718-567-9056
websaịtị: www.altronix.com | ozi-e: info@altronix.com | Akwụkwọ ikike ndụ
IIMaximal11FDV/33FDV/55FDV/75FDV/77FDV Series
H11U
Akwụkwọ / akụrụngwa
 |
MAXIMAL FDV Series Dual Power Supply Access Controllers [pdf] Ntuziaka nwụnye Oke FDV Series Dual Power Supply Access Controllers Power, Maximal FDV Series, Dual Power In Access Power Controllers, Abụọ Ike Ike, Nweta ike njikwa, njikwa ike, ikenye ọkụ, Maximal11FDV, Maximal33FDV, Maximal55FDV, Maximal75FDV,FDimal77 |
