M5STACK M5NANOC6 bọọdụ mmepe IoT dị ala
Nkọwapụta
- MCU: ESP32-C6FH4@RISC-V 32-bit single-core processor
- Ihe nhazi na arụmọrụ:
- RISC-V 32-bit otu-core processor
- Ruo ugboro elekere 160 MHz
- Ụlọ ọrụ na-eduga obere ike yana arụmọrụ RF
- Ebe nchekwa:
- 320 KB ROM arụnyere n'ime ya
- 512 KB SRAM
- 16 KB obere ike SRAM
- Na-akwado Flash mpụga
- GPIO pins na interface mmemme: SPI, UART, I2C, I2S, RMT, TWAI, PWM
Ntuziaka ojiji ngwaahịa
Mmalite ngwa ngwa
ARDUINO IDE
- Iji malite iji M5STACK NanoC6 na Arduino IDE, soro usoro enyere na ntuziaka onye ọrụ maka ịtọ IDE na bulite koodu na ngwaọrụ ahụ.
BLUETOOTH SERIAL
- Ị nwere ike ịmepụta njikọ serial Bluetooth na M5STACK NanoC6 site n'ịkwado Bluetooth na ngwaọrụ gị yana ijikọ ya na NanoC6. Rụtụ aka na ntuziaka onye ọrụ maka ntuziaka zuru ezu maka otu esi ahazi na iji nzikọrịta ozi Bluetooth.
WIFI nyocha
- M5STACK NanoC6 na-akwado 2.4 GHz Wi-Fi 6 (802.11 ax). Jiri ntuziaka enyere ka nyocha maka netwọk Wi-Fi dị wee jikọọ NanoC6 na netwọk ịchọrọ.
ZIGBEE
- NanoC6 na-akwado nzikọrịta ozi Zigbee. Soro ntuziaka dị n'akwụkwọ ntuziaka ka ịhazi na jiri ọrụ Zigbee maka mgbanwe data.
FAQ
Ajụjụ: Enwere m ike ịgbatị oghere nchekwa nke M5STACK NanoC6?
- A: Ee, ị nwere ike ịgbatị ohere nchekwa maka koodu mmemme site na ebe nchekwa mpụga ka NanoC6 na-akwado Flash mpụga.
Ajụjụ: Gịnị nzikọrịta ozi nke M5STACK NanoC6 na-akwado?
- A: NanoC6 na-akwado SPI, UART, I2C, I2S, RMT, TWAI, na PWM ihu maka mgbanwe mgbanwe data na ngwaọrụ ndị ọzọ.
MỤTA
M5NanoC6 bụ obere bọọdụ mmepe IoT dị obere n'ime usoro ngwa mmepe M5Stack. Kwadoro site na ESP32-C6 MCU, ọ na-akwado nkwado nkwukọrịta ikuku dị elu, gụnyere Wi-Fi 6 na Zigbee, na-eme ka njikwa enweghị nkebi nke ngwaọrụ IoT infrared site na nnyefe infrared wuru n'ime ya. Igwe seramiiki nọ n'ụgbọ ahụ na-eme ka njikọ nkwurịta okwu ikuku kwụsiri ike. Na mgbakwunye, ngwaọrụ ahụ nwere RGB LEDs nwere ike ime, na-agbakwunye mmetụ anya ahaziri iche na ọrụ. Ntinye nke Grove interfaces na-enye ohere M5NanoC6 iji ngwa M5 dị iche iche gbasaa n'ụzọ dị nro, na-akwado njikọ nke ụdị ngwaọrụ dị iche iche site na protocol dị ka UART na I2C. Nke a na-enye ndị mmepe ohere mgbasawanye ngwaike dị ukwuu. Kwesịrị ekwesị maka ngwa n'ime ụlọ smart, akpaaka ụlọ ọrụ, nlekota ahụike, na ngwaọrụ IoT, M5NanoC6 na-ewepụta ngwọta mmepe zuru oke maka ọrụ ọhụrụ.
ESP32-C6
- Ike nzikọrịta ozi:
- Na-akwado 2.4GHz Wi-Fi 6 (802.11 ax): Na-enye nkwukọrịta Wi-Fi ọsọ ọsọ na nke ọma.
- Bluetooth® 5 (LE): gbakwunyere teknụzụ Bluetooth 5.0 maka mkpuchi ikuku agbatị ogologo yana nnyefe data ngwa ngwa.
- Zigbee na eri (802.15.4): Na-akwado usoro nkwukọrịta Zigbee na Thread, na-enye njikọta mgbanwe maka ngwa IoT.
- RISC-V 32-bit otu-core processor: Na-enye ụkpụrụ nhazi nhazi nke ukwuu na-agbanwe agbanwe.
- Ruo ugboro elekere 160 MHz: Gbaa mbọ hụ na ngwaọrụ ahụ nwere ikike nhazi data ngwa ngwa na nke ọma.
- Mmepụta ụlọ ọrụ obere ike na arụ ọrụ RF: Na-enweta ọkwa dị elu na ma oriri ike yana arụmọrụ RF.
- Ebe nchekwa:
- Wuru n'ime 320 KB ROM: Ejiri ya maka ịchekwa ngwa ngwa ma ọ bụ koodu mmemme.
- 512 KB SRAM: A na-eji ya maka nchekwa data ojiri oge.
- 16 KB obere ike SRAM: Ezubere nke ọma maka ịrụ ọrụ ike dị ala. Na-akwado Flash mpụga: Nwere ike ịgbatị oghere nchekwa maka koodu mmemme site na ebe nchekwa mpụga.
- GPIO pins na interface mmemme:
- Na-akwado SPI, UART, I2C, I2S, RMT, TWAI, na PWM: ọtụtụ nzikọrịta ozi, na-akwalite mgbanwe maka mgbanwe data na ngwaọrụ ndị ọzọ.
Nkọwapụta
Nkọwapụta/ Parameter
- MCU ESP32-C6FH4@RISC-V 32-bit single-core processor 160 MHZ, 320 KB ROM, 512 KB SRAM, 16 KB obere ike SRAM, na-akwado flash mpụga
- RGB nwere ike ime WS2812-2020
- Ntinye voltage 5V
- Ụdị nzikọrịta ozi 2.4 GHz Wi-Fi 6 (802.11 ax), Zigbee and Thread (802.15.4) na ụzọ nzikọrịta ozi ndị ọzọ bụ isi.
- Protocol nzikọrịta ozi Nkwado SPI, UART, I2C, I2S, RMT, TWAI na PWM
- Ụdị antenna Igwe seramiiki nọ n'elu
- Akụkụ ndị ọzọ Mbufe infrared bọọdụ, bọtịnụ njikwa n'ime ihe nwere ike ime
- Ọnọdụ okpomọkụ na-arụ ọrụ 0-40 Celsius C
FCC ịkpachara anya
Mgbanwe ọ bụla ma ọ bụ mgbanwe ọ bụla nke ndị otu na-ahụ maka nnabata na-akwadoghị nke ọma nwere ike imebi ikike onye ọrụ iji rụọ ọrụ ahụ. Ngwaọrụ a na-akwado akụkụ 15 nke Iwu FCC. Ọrụ dị n'okpuru ọnọdụ abụọ ndị a: (1) Ngwaọrụ a nwere ike ọ gaghị ebute nnyonye anya na-emerụ ahụ, yana (2) ngwaọrụ a ga-anabatarịrị nnyonye anya ọ bụla enwetara, gụnyere nnyonye anya nwere ike bute ọrụ na-achọghị.
IHE dị mkpa:
Mara: A nwalere ngwa a wee hụ na ọ dabara na oke maka ngwaọrụ dijitalụ Klas B, n'okpuru akụkụ 15 nke Iwu FCC. Emebere oke ndị a iji nye nchebe ezi uche dị na ya megide nnyonye anya na-emerụ emerụ na ntinye ụlọ. Akụrụngwa a na-ewepụta, na-eji, ma nwee ike ịgbasa ike ugboro redio yana, ọ bụrụ na etinyeghị ya ma jiri ya n'okpuru ntuziaka ahụ, nwere ike ibute ndabichi na-emerụ ahụ na nkwukọrịta redio. Agbanyeghị, enweghị nkwa na nnyonye anya agaghị eme na otu nrụnye. Ọ bụrụ na akụrụngwa a na-ebute nnyonye anya na-emerụ ahụ na nnabata redio ma ọ bụ telivishọn, nke enwere ike ikpebi site na ịgbanyụ ma gbanye akụrụngwa, a na-agba onye ọrụ ume ka ọ nwaa idozi nnyonye anya site na otu ma ọ bụ karịa n'ime usoro ndị a:
- Megharịa ma ọ bụ bugharịa antenna nnata.
- Mee ka nkewa dị n'etiti akụrụngwa na onye nnata.
- Jikọọ akụrụngwa na ntinye na sekit dị iche na nke ejikọrọ onye nnata.
- Kpọtụrụ onye na-ere ahịa ma ọ bụ onye ọrụ redio/TV nwere ahụmahụ maka enyemaka.
Nkwupụta Mkpughe FCC Radiation:
Ngwa a na-akwado oke ikpughe radieshon FCC nke edobere maka gburugburu ebe anaghị achịkwa ya. A nwalere SAR maka ngwaọrụ ahụ n'ụdị eyi uwe ahụ yana anya 5mm. Ọ nwere ike izute oke SAR nke FCC.
Ngwa ngwa ngwa
ARDUINO IDE
Iji nweta onye ọrụ Arduino websaịtị (https://www.arduino.cc/en/Main/Software) wee budata ngwungwu nwụnye maka sistemụ arụmọrụ gị, soro usoro ndị a:
- Mepee Arduino IDE wee gaa na File -> Mmasị -> Ntọala.
- Detuo onye njikwa bọọdụ M5Stack ndị a URL ma mado ya n'ime “Onye njikwa bọọdụ mgbakwunye URLs": https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/arduino/package_m5stack_index.json
- Gaa na: Ngwaọrụ -> bọọdụ: -> Onye njikwa bọọdụ…
- Chọọ maka M5Stack, chọta ya, wee pịa "Wụnye."
- Họrọ Ngwa -> Board: -> M5Stack Arduino
- Họrọ M5NanoC6
BLUETOOTH SERIAL
- Mepee Arduino IDE wee buru exampmmemme: File -> Ọpụpụamples -> BLE -> Dee.
- Jikọọ ngwaọrụ na kọmputa.
- Họrọ ọdụ ụgbọ mmiri kwesịrị ekwesị maka ibugo. Ozugbo emechara, ngwaọrụ a ga-enyere Bluetooth aka na-akpaghị aka.
- Aha ngwaọrụ ka atọrọ na MyESP32. Ugbu a, jiri ngwa nzikọrịta ozi Bluetooth na PC gị iji nweta nnyefe nke data serial Bluetooth nke ọma.
WIFI nyocha
- Mepee Arduino IDE wee buru exampmmemme: File -> Ọpụpụamples -> WiFi -> WiFiScan.
- Jikọọ ngwaọrụ na kọmputa wee họrọ ọdụ ụgbọ mmiri kwesịrị ekwesị maka ibugo.
- Ozugbo emechara, ngwaọrụ ahụ ga-eme nyocha WiFi na-akpaghị aka. Ị nwere ike nweta nsonaazụ nyocha WiFi ugbu a site na nleba anya serial arụnyere na Arduino.
Zigbee (A ga-akwado mmemme Arduino ma emechaa.)
- Anyị nwere ike nyochaa arụmọrụ Zigbee site na iji ngwa ngwa ngwa nke mmemme ahụ.
- Pịa Ọkụ iji dee mmemme na ngwaọrụ.
- Ebulite mechara, ị nwere ike ịhụ nsonaazụ ya.
Akwụkwọ / akụrụngwa
 |
M5STACK M5NANOC6 bọọdụ mmepe IoT dị ala [pdf] Ntuziaka onye ọrụ M5NANOC6, M5NANOC6 IoT Development Board, obere ike IoT Development Board, IoT Development Board, Board Development Board, Board. |