Lesen Precision LS9018-W PC Multi Function Controller
| Ụbọchị dị irè | Compiled By | Reviewed Site | Kwanyere ya |
| 2025.4.28 |
- Nkọwapụta ngwaahịa
- Sample nkọwapụta
Okwu:
- If the following information is updated, no further notice will be given. Please confirm whether the materials in your hand are the latest version before use.
- We will not be responsible for the consequences caused by incorrect or inappropriate operations.
Product Introduction and Application Scope
PC Multi-function Controller (referred to as “PC Controller”). The controller has a built-in channel light to indicate its status, which is clear and easy to identify. It is equipped with a stable motor that provides real-time game vibration feedback, offering users an immersive gaming experience.
Njirimara ngwaahịa
- The PC controller supports Bluetooth connection mode, wired connection mode, and 2.4G mode across different platforms.
- Compatible with Windows, Switch console, Android, iOS, and Tesla systems.
- Bluetooth mode supports PC, Switch, Android, and iOS, with platform switching achieved via combination keys.
- Wired mode supports XINPUT (PC360), DINPUT functions, Switch, and Android.
- 2.4G mode supports PC, Android, PS3, Switch, and Tesla.
Ọdịdị ngwaahịa
Usoro Ọrụ Ngwaahịa
Pairing Combination Keys (XBOX360 Layout Silk Print)
PC
| Ọdabara
Sistemu |
Sistemụ Windows | |
| Ụdị ọrụ | Ụdị eriri USB | Ọnọdụ Bluetooth |
| Njikọ ụdịdị | Plug in USB for automatic recognition |
|
| Connected Device Name | Ntinye X: Xbox 360 Controller for Windows D-input: PC_Controller | Ihe njikwa ikuku Xbox |
|
Ìhè ihe ngosi |
X-input: Indicator stays on D-input: Indicator stays on |
|
|
Okwu |
Long-press START+SELECT for 3 seconds to switch between X-input and D-input (cyclic switching) | |
Gbanwee
| Ọdabara
Sistemu |
Gbanwee njikwa | |
| Ụdị ọrụ | Ụdị eriri USB | Ọnọdụ Bluetooth |
| Njikọ ụdịdị | Plug in USB for automatic recognition |
|
| Ejikọtara
Aha ngwaọrụ |
||
|
Ìhè ihe ngosi |
Ihe ngosi na-anọ |
|
| Okwu | For SWITCH console games | For SWITCH console games |
Android
| Ọdabara
Sistemu |
Sistemụ Android | |
| Na-arụ ọrụ
Ụdị |
Ọnọdụ Bluetooth | Ụdị eriri USB |
| Njikọ ụdịdị | Pairing: Hold A+HOME buttons for 3 seconds Reconnection: Short-press HOME button | Plug in USB for automatic recognition |
| Ngwa ejikọrọ
Aha |
Gamepad |
|
|
Ìhè ihe ngosi |
Pairing: Indicator flashes rapidly Reconnection: Indicator flashes slowly Recognition: Indicator stays on |
Recognition: Indicator stays on |
| Okwu | For arcade games, Android native games, TV | For arcade games, Android native games, TV |
IOS
| Ọdabara
Sistemu |
Sistemụ ọdabara |
| Ụdị ọrụ | Ọnọdụ Bluetooth |
| Njikọ ụdịdị | Pairing: Hold L1+HOME buttons for 3 seconds Reconnection: Short-press HOME button |
| Ejikọtara
Aha ngwaọrụ |
DUALSHOCK 4 Wireless Controller |
|
Ìhè ihe ngosi |
|
| Okwu |
2.4G:
- Connect the 2.4G Dongle to the PC. Press and hold R1+HOME buttons for 3 seconds to power on and enter 2.4G pairing mode. The controller’s indicator will flash rapidly, and it will automatically connect to the PC. Upon successful connection, the 2.4G Dongle indicator and controller indicator will stay on, defaulting to X-input mode. Long-press START+SELECT for 3 seconds to switch to D-input mode (vibration prompt upon successful switch).
X-input Name：Xbox 360 Controller for Windows
D-input Name：Aurora Onye njikwa PC - 2、Connect the 2.4G Dongle to Android. Press and hold R1+HOME buttons for 3 seconds to power on and enter
2.4G pairing mode. The controller will automatically connect to Android, with both indicators staying on upon success. - Connect the 2.4G Dongle to SWITCH. Press and hold R1+HOME buttons for 3 seconds to power on and enter 2.4G pairing mode. The controller will automatically connect to SWITCH, with both indicators staying on upon success.
- Connect the 2.4G Dongle to PS3. Press and hold R1+HOME buttons for 3 seconds to power on and enter 2.4G pairing mode. The controller will automatically connect to PS3, with both indicators staying on upon success.
- Connect the 2.4G Dongle to Tesla. Press and hold R1+HOME buttons for 3 seconds to power on and enter 2.4G pairing mode. The controller will automatically connect to Tesla, with both indicators staying on upon success.
- Short-press the HOME button to reconnect. The controller’s indicator will flash slowly, staying on upon successful reconnection.
Ọrụ Turbo
Turbo Function Settings:
- Hold the Turbo key and short-press the button to be set as TURBO; the button will enable manual rapid fire.
- While in manual rapid fire, hold the Turbo key and short-press the assigned button to switch to automatic rapid fire.
- While in automatic rapid fire, hold the Turbo key and short-press the assigned button to cancel the rapid fire function.
- Rapid fire modes cycle: Manual Rapid Fire → Automatic Rapid Fire → Cancel Rapid Fire.
- Assignable keys: A, B, X, Y, L1, R1, L2, R2, UP, DOWN, LEFT, RIGHT
Turbo Rapid Fire Speed Settings:
- Turbo + Right 3D Up: Increase speed by one gear
- Turbo + Right 3D Down: Decrease speed by one gear
- Hold Turbo and push the right joystick fully up to increase speed, or fully down to decrease speed. The motor will vibrate once per successful setting.
- Three speed gears: 1st gear 5 times/sec, 2nd gear 12 times/sec, 3rd gear 20 times/sec (settings are memory-preserved).
Clear All Turbo Functions:
- Use the combination key Turbo + SELECT (-) to clear all rapid fire assignments.
- Turbo settings are not preserved when the controller is powered off.
Motor Vibration
- The controller supports motor vibration feedback with left and right pressure-sensitive motors.
- Vibration intensity adapts to feedback from platform games.
- Vibration Intensity Adjustment (settings preserved when powered off):
- Turbo + Left Joystick Up: Increase intensity by one gear
- Turbo + Left Joystick Down: Decrease intensity by one gear
- Four intensity levels: 0% – 30% – 75% – 100% (default: 75%). The motor will vibrate for 1 second upon completion of settings.
- Vibration Intensity Adjustment (settings preserved when powered off):
MACRO (Programming Function)
- Supported Keys: A, B, X, Y, LB, RB, LT, RT, D-pad (UP/DOWN/LEFT/RIGHT), left joystick, right joystick, L3, R3.
- Ọrụ:
Hold the SET key for 3 seconds (motor vibration prompt, channel light flashes slowly) to enter macro programming mode. Hold the keys to be combined; the channel light will flash rapidly three times to indicate key recording. Input intervals exceeding 15 seconds will auto-exit programming without saving.,Press M1 (M2) to confirm the combination key (motor vibration prompt, channel light stays on). (In wired charging mode, the indicator will revert to charging flash frequency.)
Kpochapụ ọrụ:
- Hold the SET key for 3 seconds to enter programming mode.
- Press M1 (M2) without inputting any keys to clear the macro function for that back key (vibration prompt, channel light reverts to previous state)
- Programming memory: Settings are preserved when powered off. M1 and M2 are factory-reset to empty.
- Oke: Each macro key supports up to 25 inputs. If ≥25 keys are recorded, the channel light will flash rapidly to indicate overload. Press the back key to save the first 25 inputs, or auto-exit without saving after 15 seconds.
Mara: M1 and M2 cannot trigger functions simultaneously if both are programmed with combinations
Key Layout Switching
Use the combination key Turbo + R3 to switch A/B/X/Y key layouts (X-Y and A-B swapped). Settings are not preserved when powered off.
Njikọta ọzọ
Short-press the Home key when powered off to enter reconnection mode (30-second timeout). The controller will auto-power off if reconnection fails.
Gbanyụọ ike
Mmechi akwụkwọ ntuziaka:
- Long-press the Home key for 5 seconds during reconnection.
- Long-press the Home key for 5 seconds while connected.
- Long-press the Home key for 5 seconds during pairing.
Mgbachi akpaaka:
- Auto-power off after 60 seconds of failed pairing.
- Auto-power off after 30 seconds of failed reconnection.
- Auto-power off after 5 minutes of inactivity (no button/joystick input) while connected.
- Auto-power off when battery voltage drops below 3.45V (inoperable).
Ịchaji
- Agbanyụrụ: White LED flashes when plugged into a charger; LED turns off when fully charged.
- Ejikọtara: Corresponding channel light flashes slowly when plugged into USB; stays on when fully charged.
Oti mkpu/Mkpuchi batrị dị ala
- Mgbe batrị voltage drops below 3.6V (±0.05V error) in wireless mode, the channel light will flash rapidly for low battery warning.
- Auto-power off when voltage drops below 3.45V (±0.05V error) in wireless mode.
Tọgharia Ọrụ
Press the reset button on the back of the controller to restore default settings in case of anomalies.
Sensor Abnormality Calibration
When sensor issues occur:
- Power off the controller and place it on a flat surface.
- Hold (-)SELECT + HOME to enter calibration mode (HOME indicator flashes rapidly).
- The indicator will turn off upon successful calibration; release the keys. If calibration fails, the HOME indicator stays on. Short-press HOME twice to restore normal mode, then retry calibration.
Nkọwa nka nka
| Oke | Data | Nkọwa |
| Nrụ ọrụ Voltage | 3.7V | Lithium battery-powered |
| Na-arụ ọrụ ugbu a | ||
| Njikere Ugbu a | 5 uA | Opekempe |
| Mmaji moto ugbu a | 60-120mA | Maximum current for both motors during normal operation |
| Nchaji Voltage | 5V | USB 5V charging |
| Ịchaji ugbu a | > 350mA | |
| Ike batrị | ||
| Ikuku iche | 8 mita | Njikọ Bluetooth |
Nchekwa na Ụgbọ njem
- Nchekwa: Store in a shaded, room-temperature environment with good ventilation, dryness, and anti-static measures.
- Ụgbọ njem: Protect against static electricity, drops, dust, impacts, and extrusion.
Ihe ndetu pụrụ iche
- All information in this specification is accurate and reliable, but the company assumes no liability for consequences caused by improper operation or use.
- The company shall not be responsible for issues arising from unavoidable factors such as official system/game/platform upgrades or changes. The company reserves the right to final interpretation.
- Nkọwapụta nwere ike ịgbanwe na-enweghị ọkwa mbụ.
FCC NDỌ AKA NA NTN
Ngwaọrụ a na-akwado akụkụ 15 nke Iwu FCC. A na-arụ ọrụ n'okpuru ọnọdụ abụọ a:
- Ngwaọrụ a nwere ike ọ gaghị ebute nnyonye anya na-emerụ ahụ, yana
- Ngwaọrụ a ga-anabatarịrị nnyonye anya ọ bụla enwetara, gụnyere nnyonye anya nwere ike ibute ọrụ na-achọghị.
Mgbanwe ọ bụla ma ọ bụ mgbanwe ọ bụla nke ndị na-ahụ maka nnabata na-akwadoghị nke ọma nwere ike imebi ikike onye ọrụ iji rụọ ọrụ ahụ.
Mara: A nwalere ngwa a wee hụ na ọ dabara na oke maka ngwaọrụ dijitalụ Klas B, dịka akụkụ 15 nke Iwu FCC. Emebere oke ndị a iji nye nchebe ezi uche dị na ya megide nnyonye anya na-emerụ emerụ na ntinye ụlọ. Akụrụngwa a na-ewepụta ojiji ma nwee ike ịgbasa ike ugboro redio yana, ọ bụrụ na etinyeghị ya ma jiri ya dịka ntuziaka ahụ siri dị, nwere ike ibute ndabichi na-emerụ ahụ na nkwukọrịta redio. Agbanyeghị, enweghị nkwa na nnyonye anya agaghị eme na otu nrụnye. Ọ bụrụ na akụrụngwa a na-ebute nnyonye anya na-emerụ ahụ na nnabata redio ma ọ bụ telivishọn, nke enwere ike ikpebi site na ịgbanyụ ma gbanye akụrụngwa, a na-agba onye ọrụ ume ka ọ nwaa idozi nnyonye anya site na otu ma ọ bụ karịa n'ime usoro ndị a:
- Megharịa ma ọ bụ bugharịa antenna nnata.
- Mee ka nkewa dị n'etiti akụrụngwa na nnata.
- Jikọọ akụrụngwa n'ime oghere na sekit dị iche na nke ejikọrọ onye nnata.
- Kpọtụrụ onye na-ere ahịa ma ọ bụ onye ọrụ redio/TV nwere ahụmahụ maka enyemaka.
Ịdọ aka ná ntị:
- mgbanwe ma ọ bụ mgbanwe ndị ndị otu na-ahụ maka nnabata na-akwadoghị nke ọma nwere ike imebi ikike onye ọrụ iji rụọ ngwa ahụ.
- Atụlela ngwaọrụ ndị ahụ iji zute ihe ngosi RF izugbe, enwere ike iji ngwaọrụ ahụ na ọnọdụ mkpughe na-enweghị mmachi.
Ajụjụ a na-ajụkarị
What platforms is the controller compatible with?
The controller is compatible with Windows, Switch console,Android, iOS, and Tesla systems.
How do I switch between X-input and D-input modes on Windows?
The controller is compatible with Windows, Switch console,Android, iOS, and Tesla systems.
Kedu otu m ga-esi jikọta njikwa na ngwaọrụ gam akporo?
For Android devices, hold A+HOME buttons for 3 seconds to pair via Bluetooth mode.
Akwụkwọ / akụrụngwa
 |
Lesen Precision LS9018-W PC Multi Function Controller [pdf] Ntuziaka onye ọrụ LS9018-W, 2BRPY-LS9018-W, 2BRPYLS9018W, LS9018-W PC Multi Function Controller, LS9018-W, PC Multi Function Controller, Function Controller, Controller |