EZRUN
Akwụkwọ ntuziaka USER
Njikwa ọsọ eletrọnịkị na-enweghị ahịhịa
EZRUN MAX8 G2S
EZRUN MAX6 G2
EZRUN MAX5 HV Plus G2

Nkwuputa

Daalụ maka ịzụrụ ngwaahịa HOBBYWING a! Biko gụọ akwụkwọ ntuziaka a nke ọma tupu ejiri ya, ozugbo i jiri ngwaahịa a, a ghọtara na ị gụọla ma kwenye na ọdịnaya niile. Sistemu ọkụ na-enweghị ahịhịa nwere ike ịdị oke egwu yana ojiji ọ bụla na-ezighi ezi nwere ike ibute mmerụ ahụ yana mebie ngwaahịa na ngwaọrụ ndị metụtara ya, yabụ biko soro ntuziaka a n'oge ntinye na ojiji. N'ihi na anyị enweghị njikwa iji, nrụnye, ma ọ bụ mmezi nke ngwaahịa a, enweghị ike ịweta ụgwọ maka mmebi ma ọ bụ mfu ọ bụla sitere na iji ngwaahịa a. Anyị anaghị eburu ibu ọrụ maka mfu ọ bụla kpatara mgbanwe na-enweghị ikike na ngwaahịa anyị. Anyị nwere ikike ịgbanwe nhazi ngwaahịa anyị, ọdịdị, njirimara na ihe eji achọ ihe na-enweghị ọkwa. Anyị, HOBBYWING, bụ naanị maka ọnụ ahịa ngwaahịa anyị na ọ nweghị ihe ọzọ n'ihi iji ngwaahịa anyị. Banyere semantic enwere ike dị iche n'etiti nsụgharị abụọ dị iche iche nke nkwupụta, maka ndị ọrụ na China China, biko were ụdị China dịka ọkọlọtọ; maka ndị ọrụ nọ na mpaghara ndị ọzọ, biko were ụdị bekee dị ka ọkọlọtọ.

Ịdọ aka ná ntị

• Iji zere sekit dị mkpụmkpụ, hụ na wires na njikọ niile kpuchiri nke ọma tupu ijikọ ESC na ngwaọrụ ndị metụtara ya.
• Gbaa mbọ hụ na ejikọrọ ngwaọrụ niile dị na sistemụ ahụ nke ọma iji gbochie mmebi ọ bụla na sistemụ.
• Gụọ akwụkwọ ntuziaka nke ihe niile a na-eji na-ewu ụlọ. Gbaa mbọ hụ na nhazi, nhazi na nrụnye n'ozuzu ya ziri ezi ma nwee ezi uche.
• Ejidela ụgbọ ala ahụ n'ikuku wee tụgharịa ya ruo n'uju, n'ihi na taya rọba nwere ike "ịgbasa" n'oke oke ma ọ bụ ọbụna gbawara wee bute mmerụ ahụ dị ukwuu.
• Kwụsị ojiji ma ọ bụrụ na casing nke ESC gafere 90 ℃ / 194℉ n'ihi na nke a nwere ike imebi ma ESC na moto.
• A ghaghị ịpụpụ batrị mgbe ejiri ya. Enwere obere eserese ọbụlagodi mgbe sistemu ahụ kwụsịrị, ọ ga-emecha kwatuo batrị ahụ kpamkpam. Nke a nwere ike bute mmebi na ESC, ma agaghị ekpuchi ya n'okpuru akwụkwọ ikike.

Feat ures

• The esc nwere ihe ọhụrụ waterproof interface interface, na-eme ka n'ozuzu waterproof na uzuzu arụmọrụ. Ọ dị mfe ịnagide ọnọdụ ọjọọ nke nwere sedimenti, ice na snow, nchịkọta mmiri.
• Wuru na ultra-ike mgbanwe mode BEC na nkwado maka 6V / 7.4V / 8.4V ịgbanwee, na-akwado a dịgasị iche iche nke ike na elu-vol.tagna servos.
• Na-akwado ntọala oge turbo, nzaghachi oge dị ịrịba ama mgbe ejiri moto dabara adaba.
• Ihe arụnyere n'ime ya (agbakwunyere na mgba ọkụ) Ọrụ Bluetooth na-enye ohere maka ịtọ na ịkwalite esc site na ijikọ ozugbo na ngwa mkpanaka, na-enweghị ngwaọrụ ọ bụla ọzọ, na-eme ka ọ dị mfe ma dị mfe.
• Ọrụ ndekọ data na view data dị iche iche na-agba ọsọ na ngwa HW LINK.
• Na-akwado nkwalite ngwa ngwa nke ESC, ị nwere ike ịnụ ụtọ ọrụ kachasị ọhụrụ.

Nkọwapụta

Ụdị	EZRUN MAX8 G2S	EZRUN MAX6 G2	EZRUN MAX5 HV Plus G2
Gaa n'ihu. / ọnụ ọgụgụ kasị elu ugbu a	160A / 1050A	200A / 1200A	350A / 2000A
Ụdị moto	moto na-enweghị ihe mmetụta na enweghị mmetụta	Sensored / Sensorless brushless moto	moto na-enweghị ihe mmetụta na enweghị mmetụta
Ngwa	1/8 n'okporo ụzọ, gwongworo mkpụmkpụ, gwongworo anụ ọhịa	1/6&1/7 n'okporo ụzọ, Ụgbọala, nnukwu anụ mmiri	1. 1/8 and 1/7 vehicles for Extreme Speed 2. 1/5 Truck,Monster for Extreme Bashing
Oke moto (Mbamadụ*)	Na 4S Lipo: KV≤ 3000 Na 6S Lipo: KV≤ 2400 4278 nha moto	Na 6S Lipo: KV≤ 2400 With 8S Lipo: KV≤ 1700 4990/5690 size motor	With 8S Lipo: KV≤ 2500 With 12S Lipo: KV≤ 1600
Mkpụrụ ndụ Lipo	3-6S Lipo	3-8S Lipo	6-12S LiPo
Mpụta nke BEC	6V / 7.4V / 8.4V mgbanwe, na-aga n'ihu ugbu a 6A (mgbanwe-ụdị)	6V/7.4V/8.4V nwere ike ịgbanwe, 8A na-aga n'ihu ugbu a (mgbanwe-ụdị)	6V/7.4V/8.4V nwere ike ịgbanwe, 8A na-aga n'ihu ugbu a (mgbanwe-ụdị)
Onye ofufe jụrụ oyi	Kwadoro site na BEC voltage	Kwadoro site na BEC voltage	Kwadoro site na BEC voltage
Nha	60 (L) x 48 (W) x 40.5 (H) mm	70 (L) x 56 (W) x 45.5 (H) mm	94.5 (L) x 59.4 (W) x 51.6 (H) mm
Ibu	192g(Included input wires&connectors)	245g (Included input wires)	425g (Included input wires)
Usoro mmemme	iOS ma ọ bụ gam akporo smart ekwentị (jiri ngwa HW LINK arụnyere)	iOS ma ọ bụ gam akporo smart ekwentị (jiri ngwa HW LINK arụnyere)	iOS ma ọ bụ gam akporo smart ekwentị (jiri ngwa HW LINK arụnyere)

Rịba ama *:

1. Ogo nke uru KV ebe a bụ uru akwadoro n'okpuru ngwa ọkọlọtọ (jikọtara ya na rpm nke moto na-akwado na ibu ụgbọ ala ahụ n'ezie), na anaghị anọchi anya rpm kachasị nke esc kwadoro.
2. Dị ka MAX5 HV Plus G2 bụ nke emebere maka ngwa ngwa dị oke elu ma na-akwado rpm moto dị elu, ọ dị mkpa iji gosi ma moto eji eme ihe na-akwado rpm dị elu mgbe ọ dakọtara ka ọ ghara imebi moto ahụ.

Njikọ

Rụtụ aka na ntuziaka wiring na eserese waya:

1. Njikọ moto:
   Enwere ọdịiche dị n'etiti ijikọ moto na-enweghị isi na moto na-enweghị ihe mmetụta:
   A. Mgbe ị na-ejikọta na moto enweghị brushed nwere mmetụta:
   Ekwesịrị ijikọ njikọ ESC na moto nke ọma, wires A/B/C atọ nke ESC ga-ejikọrịrị na wires moto A/B/C atọ kwekọrọ, ma ọ bụghị ya, ọ nwere ike imebi ESC. Na-esote, jikọọ eriri sensọ nke esc na moto dịka akara akụ na njikọ ihe mmetụta.
   Ọ bụrụ na itinyeghị eriri sensọ na, ESC gị ga-arụ ọrụ na ọnọdụ enweghị mmetụta ọbụlagodi na ị na-eji moto nwere mmetụta.
   Mara: Ọ bụrụ na ntụgharị moto na-atụgharị, gbanwee oke na ihe 4 "Motor rotation direction" iji nweta ntọala ziri ezi.
   B. Mgbe ị na-ejikọta na moto enweghị brushless:
   Enweghị usoro usoro waya achọrọ mgbe ị na-eji moto na-enweghị brushless, ị nwere ike gbanwee wires abụọ ma ọ bụrụ na moto ahụ na-aga n'akụkụ nke ọzọ.
2. Njikọ nnata:
   Jikọọ eriri ESC throttle na ọwa trotul na nnata. Ebe ọ bụ na eriri trottle nke esc ga-enwe BEC voltage mmepụta na onye nata na servo, biko enyela ike ọzọ na onye nnata, ma ọ bụghị na esc nwere ike imebi. Ọ bụrụ na achọrọ ike ọzọ, kwụpụ waya na-acha uhie uhie na plọg trottle na ESC.
3. Battery njikọ:
   Jide n'aka na ejikọrọ ogwe (+) nke ESC na mkpanaka (+) nke batrị na (-) na (-). Ọ bụrụ na atụgharịa njikọ ahụ, ESC ga-emebi ma akwụkwọ ikike agaghị ekpuchi ya.

ESC Set up

Set the Throt tle Range – ESC Calibrat ion Process
A ghaghị ime nhazi ahụ na iji ESC mbụ, ma ọ bụ ọ bụrụ na etinyere redio ma ọ bụ nnata ọhụrụ, ma ọ bụghị ya, esc nwere ike ọ gaghị arụ ọrụ nke ọma. Anyị na-akwadosi ike imeghe ọrụ nchekwa adịghị mma nke onye na-ebufe, tọọ nchebe mgbaama nke ọwa throttle (“F/S”) ka ọ bụrụ ihe ọ bụla ma ọ bụ tọọ uru nchekwa na ọnọdụ na-anọpụ iche. Ya mere moto nwere ike ịkwụsị ịgba ọsọ ma ọ bụrụ na onye nata enweghị ike ịnata mgbaàmà nke nnyefe. Usoro mmezi dị n'okpuru.

1. Turn on the transmitter, ensure all parameters (D/R, EPA, ATL)
   on the throttle channel are at default (100%). For transmitter without LCD, please turn the knob to the maximum, and the throttle “TRIM” to 0. (If the transmitter without LCD, turn the knob to the middle point). This step can be skipped if the radio’s settings are default.
2. Malite site na ịgbanwuo nnyefe na agbanyụrụ ESC mana jikọọ na batrị. Jide bọtịnụ “ike” ihe dị ka sekọnd 3, Red LED na mgba ọkụ na-amalite ịgba ọkụ, hapụ bọtịnụ ozugbo (ọ bụrụ na ewepụtaghị bọtịnụ ahụ n'ime sekọnd 8, aha na paswọọdụ Bluetooth ga-eweghachi na ntọala ụlọ ọrụ), na moto ga-ada synchronously.
   Rịba ama : Beeps si moto nwere ike ịdị ala mgbe ụfọdụ, na ị nwere ike ịlele LED ọnọdụ kama.
3. Tọọ ebe na -anọpụ iche, ngwụcha ngwụcha zuru oke na njedebe breeki zuru ezu.
   • Leave transmitter at the neutral position, press the “power” button, the GREEN LED flashes 1 time and the motor beeps 1 time to accept the neutral position.
   • Pull the throttle trigger to the full throttle position, press the “power” button, the GREEN LED blinks 2 times and the motor beeps 2 times to accept the full throttle endpoint.
   • Push the throttle trigger to the full brake position, press the “power” button, the GREEN LED blinks 3 times and the motor beeps 3 times to accept the full brake endpoint.
4. Enwere ike ịmalite moto ahụ ka emechara nhazi ESC/Radio.

Gbanyụọ/ gbanyụọ yana ntụziaka ụda
Gbanwee ntuziaka: mkpirisi bọtịnụ ike ka ọ gbanye ọkụ, ogologo pịa bọtịnụ ike ka mechie.
Nkọwa ụda ike: N'okpuru ọnọdụ nkịtị, ESC ga-ewepụta "beep" ole na ole iji gosi ọnụọgụ nke mkpụrụ ndụ lithium. Mkpirisi "beep-" pụtara #1, na ogologo "beep-" pụtara #5. Maka example: “beep—, bee-” pụtara mkpụrụ ndụ isii, “beep—beep—, bee-beep-“pụtara sel iri na abụọ.
N'ikpeazụ, ụda ogologo ga-ada ụda iji kwado mmecha nke nyocha onwe.
Mara: Ịkpọ ụda moto n'otu oge, ọkụ ESC na-enwu n'otu oge. Maka example: mgbe moto na-eme ka ụda dị ogologo, esc na-egbuke egbuke ogologo oge, na mgbe moto na-eme obere ụda, esc na-egbuke egbuke maka obere oge.
Instruct ion for programmable items
Nhọrọ ndị a kapịrị ọnụ bụ ntọala ndabara nke sistemụ.

	Ihe	Nhọrọ 1	Nhọrọ 2	Nhọrọ 3	Nhọrọ 4	Nhọrọ 5	Nhọrọ 6	Nhọrọ 7	Nhọrọ 8	Nhọrọ 9
1	Modegba ọsọ	jiri breeki gaa n'ihu	Gaa n'ihu / tụgharịa jiri breeki	Na-aga n'ihu na ntụgharị
2	Mkpụrụ ndụ Lipo	Akpaaka	2S	3S	4S	5S	6S	7S	8S
			6S	7S	8S	9S	10S	11S	12S
3	Cutoff Voltage	Agbanyụrụ	Akpaaka (dị ala)	Akpaaka (ọkara)	Akpaaka (dị elu)
4	Ntugharị moto	CCW	CW
5	BEC Voltage	6.0V	7.4V	8.4V
6	Ike breeki	12.50%	25%	37.50%	50%	62.50%	75%	87.50%	100%	Agbanyụrụ
7	Ike Max.Reverse	25%	50%	75%	100%
8	Punch	Ọkwa 1	Ọkwa 2	Ọkwa 3	Ọkwa 4	Ọkwa 5	Ọkwa 6	Ọkwa 7	Ọkwa 8	Ọkwa 9
9	Dọkpụrụ Brake Force	0-100% (Hazie nzọụkwụ 1%), nke ndabara 0%.
10	Mgbapụ Mbụ nke Mbụ	0.5%	1%	2%	3%	4%	5%	6%	7%	8%
11	Oge Turbo	0°	4°	8°	12°	16°	20°	24°	28°	32°
12	Nkwụsị Turbo	Ngwa ngwa	0.05s	0.1s	0.15s	0.2s	0.3s	0.5s	0.7s	1.0s
13	Nchedo nchekwa ọkụ ESC	Agbanyụrụ	Agbanyere

Rịba ama : Regarding the “Lipo Cells” item,MAX8 G2S supports 3-6S adjustable, MAX6 G2 supports 3-8S adjustable, and MAX5 HV Plus G2 supports 6-12S adjustable.
Banyere ihe “Max.Brake Force”, uru ndabara maka MAX8 G2S bụ 50%, uru ndabara maka MAX6 G2 na MAX5 HV Plus G2 bụ 62.5%.
Banyere "Turbo Time" ihe, na MAX8 G2S nwere ike ịtọ ruo 32 degrees, na MAX6 G2 na MAX5 HV Plus G2 nwere ike ịtọ ruo 24 degrees.
Banyere ihe “ESC Thermal Protection”, MAX8 G2S na MAX6 G2 enweghị ntọala oke a.

1. Modegba ọsọ:
   Nhọrọ 1: jiri breeki gaa n'ihu
   Ụgbọ ala ahụ nwere ike ịga n'ihu naanị ma nwee ọrụ breeki. Nke a na-anabatakarị n'ọsọ.
   Nhọrọ 2: Gaba/ tụgharịa na breeki
   Ụgbọ ala ahụ na-agba naanị brek na oge mbụ ị na-akwanye trotul mkpalite gaa n'ọnọdụ ntụgharị/brek. Ọ bụrụ na moto na-akwụsị mgbe throttle na-akpali laghachi na-anọpụ iche ọnọdụ na mgbe ahụ re-push triga ka laa azụ ọnọdụ, ụgbọ ala ga-atụgharị, ma ọ bụrụ na moto anaghị akwụsị kpamkpam, mgbe ahụ ụgbọ gị agaghị azu ma ka breeki, mkpa ka ị weghachi throttle ịkpalite na-anọpụ iche ọnọdụ na ịkwanye ya ka ọ laa azụ ọzọ. Usoro a bụ maka igbochi ụgbọ ala ka ọ ghara ịtụgharị na mberede.
   Nhọrọ 3: Gaba ma tụgharịa
   Mgbe a na-akwali trotul ahụ ka ọ laghachi azụ, moto ahụ na-atụgharị. A na-ejikarị ọnọdụ a na ụgbọ ala pụrụ iche.
2. Mkpụrụ ndụ Lipo:
   Tọọ uru kwesịrị ekwesị dabere na ọnụọgụ batrị Lipo ejirila. A na-agbakọ ndabara na-akpaghị aka. Biko mara na nhọrọ "Auto" agaghị amata 5S na 7S, nke a bụ iji zere mgbako na-ezighi ezi n'oge eji eme ihe, maka ex.ample, 6S ​​Lipo na-enweghị ike nwere ike gbakọọ ezighi ezi dị ka ụgwọ 5S Lipo zuru ezu.
   Ya mere, ọ dị mkpa ka ejiri aka gị hazie uru paramita a mgbe ị na-eji 5S ma ọ bụ 7S Lipo.
   Mara: Nhọrọ "2S" ebe a ka edobere naanị na tebụl paramita, n'ihi njirimara sekit na ngwa kwesịrị ekwesị nke esc a, 2S Lipo anaghị akwado.
3. Vol dị alatage Cut-Off:
   Ọrụ a bụ karịsịa igbochi mwepu nke batrị lithium gabigara ókè na-akpata mmebi. ESC na-enyocha batrị voltage mgbe niile, na otu ugboro voltage na-ada n'okpuru ebe a na-etinye, ike na-ebelata ma a na-ebipụ mmepụta ike kpamkpam mgbe sekọnd ole na ole. Mgbe voltage batara, nchekwa ọkụ na-acha uhie uhie na-enwu na "-, -, -". Ọkwa atọ nke ala, ọkara na elu ebe a kwekọrọ na 2.8V/cell, 3.1V/cell na 3.4V/cell n'otu n'otu. Maka batrị NiMH, a na-atụ aro ka ịtọ paramita a ka ọ bụrụ "Nkwarụ".
4. Ntugharị moto:
   Ejiri ya iji tọọ ntụgharị ntụgharị nke moto. N'ihi ọdịiche dị na nhazi nke chassis, ọ ga-ekwe omume ka ụgbọ ala ahụ gbanwee mgbe a na-etinye trottle na-aga n'ihu, na nke a, ị nwere ike dozie ya site n'ịgbanwe ihe a.
5. BEC Voltage:
   BEC mpịakọtatage na-akwado 6V/7.4V/8.4V. N'ozuzu, 6.0V kwesịrị ekwesị maka ọkọlọtọ servos, mgbe 7.4V / 8.4V bụ adabara elu-vol.tage servos. Biko tọọ dịka nkọwapụta servo siri dị.
   Ịdọ aka ná ntị! Edokwala BEC voltage n'elu kacha arụ ọrụ voltage nke servo na nnata, n'ihi na nke a nwere ike imebi servo / reveiver ma ọ bụ ọbụna ESC.
6. Oke. Ike breeki:
   ESC a na -enye ọrụ braking nhata; a na -ekpebi mmetụta braking site na ọnọdụ nke ihe mkpalite ahụ. Ọ na -ewepụta percentage nke ike breeki dị mgbe etinyere breeki zuru oke. Nnukwu ego ga-ebelata oge breeki mana ọ nwere ike mebie pinion na ngwa ngwa.
7. Max. Azụ agbara:
   Na-ezo aka na ntụgharị ntụgharị. Ịhọrọ ụkpụrụ paramita dị iche iche nwere ike iwepụta ọsọ ntụgharị dị iche iche. A na-atụ aro ka iji obere ntughari ọsọ ọsọ iji zere mmejọ kpatara ntughari ngwa ngwa.
8. Punch:
   Enwere ike iji Punch jikwaa nzaghachi moto n'ozuzu ya, n'ihe metụtara ntinye trotul. Ọnụ ahịa setịpụrụ dị elu, ngwa ngwa ngwa ngwa. A na-adụ ọdụ ntọala ntụmadị dị ala maka mmalite dị nro, nhụta dị ala, ma ọ bụ iji nyere aka na ịla azụ moto ma ọ bụ ịsụ nsụ mgbe etinyere trotul ngwa ngwa.
9. Dọkpụrụ Brake Force:
   Na-ezo aka n'ike breeki nke moto na-ebute mgbe trotul mkpalite laghachiri n'ọnọdụ nnọpụiche. A na-adọkpụ breeki ga-abụ 0. Dọrọ breeki nwere ike ịgbakwunye ọkụ, were naanị dị ka achọrọ.
10. Ike izizi:
    Ọ na-akpọkwa dị ka opekempe trotul ike. Ịgbanwe ntọala a na traction dị nwere nwere ike inye aka na osooso. Tọọ uru dị ala maka elu traction dị ala, yana ụkpụrụ dị elu maka elu traction dị elu.
11. Oge Turbo:
    Enwere ike iji ya weta oke ọsọ ọsọ (na trotul zuru oke). Ọnụ ahịa dị elu nke elu moto RPM ga-eru. Biko rịba ama: Iji Turbo Timeing ga-eme ka ọkụ na-agba ọsọ ugbu a, na okpomọkụ nke moto na ESC. Jiri nke a na-akpachara anya.
12. Oge igbu oge Turbo:
    Mgbe edobere “TURBO DELAY” ka ọ bụrụ “ngwa ngwa”, a ga-eme ka oge Turbo rụọ ọrụ ozugbo emechara ihe na-akpali akpali gaa n'ọkwa trotul zuru oke. Ọ bụrụ na edobere igbu oge, a ga-egbu oge Turbo Time maka ego a tọhapụrụ, ọ ga-adị mkpa ka ejide trotul ahụ na trotul zuru oke maka igbu oge ahụ tupu ya amalite.
13. Nchekwa okpomọkụ ESC:
    Mgbe etinyere ya ka ọ bụrụ "Enyere", a ga-ebelata ike na-akpaghị aka mgbe okpomọkụ nke esc ruru uru a na-ahazi n'oge arụ ọrụ, a ga-agbanyụkwa ọkụ mgbe ihe dị ka 40 sekọnd. Mgbe ESC Thermal Protection na-arụ ọrụ, ìhè akwụkwọ ndụ akwụkwọ ndụ ga-enwu: "☆－ , ☆－ , ☆－". Mgbe emebere ihe a ka ọ bụrụ "Nkwarụ", ESC Thermal Protection agaghị arụ ọrụ, ọ bụrụ na okpomọkụ nke esc na-aga n'ihu, ọ ga-emebi n'ihi oke ọkụ. Ya mere, biko kpachara anya mgbe ị na-edozi ihe a. N'ihi ịtọhapụ ya na "Nkwarụ" na imebi esc, akwụkwọ ikike agaghị ekpuchi ya.

Usoro mmemme
Jiri smart ekwentị hazie ESC gị (jiri ngwa HW LINK V2 arụnyere)
Esc enweela modul Bluetooth arụnyere n'ime ya (agbakwunyere na mgba ọkụ), nke na-akwado iji ngwa mkpanaka ozugbo maka ntọala paramita, mmelite firmware na ọgụgụ data na-enweghị mkpa ngwaọrụ ndị ọzọ. Ụzọ ndị a kapịrị ọnụ bụ ndị a:

• Budata ma wụnye ngwa ọrụ Hobbywing "HW LINK V2" na ekwentị mkpanaaka gị. Maka ekwentị smart nwere sistemụ arụmọrụ iOS, biko chọọ “Hobbywing” na Storelọ Ahịa Ngwa; maka ekwentị smart nwere sistemụ arụmọrụ gam akporo, chọọ “Hobbywing” na Google Play ma ọ bụ budata ya na nke anyị websaịtị. (https://www.hobbywing.com)
• Jikọọ batrị na ESC wee gbanye ya, wee mepee ngwa ọrụ Hobbywing "HW LINK V2" na ekwentị smart gị. Ọ ga-ajụ ma ịchọrọ ijikọ "Bluetooth" ma ọ bụ "WiFi" oge mbụ mgbe imepere ngwa ahụ; N'ebe a, biko họrọ "Bluetooth". Ịkwesịrị ịgbanwe njikọ na "Bluetooth" mgbe ijiri njikọ "WiFi", ị nwere ike pịa "Ntọala" (na ibe mbụ) wee "Họrọ njikọ njikọ" iji gbanwee njikọ ahụ.
• A list of Bluetooth devices will pop out when you click the ESC icon on the upper right corner, then select the ESC you want to program to establish the Bluetooth connection between the ESC and smart phone.
  (Rịba ama: the default name & password of the Bluetooth device are HW_BLE**** & 888888.)
  ESC Mbido: Pịa【Parameters】 na home page ka mezie ESC parameters, pịa ESC akara ngosi na elu nri akuku ka Ikwupu njikọ Bluetooth n'etiti ESC na smart ekwentị mgbe emecha na-azọpụta ntọala.Nwelite Firmware: Pịa【Firmware Mmelite】 wee họrọ【dị adị】 ka ịhọrọ ụdị firmware ị chọrọ, wee pịa “Melite” iji kwalite ESC gị.
  Ndekọ data: Pịa na【Data Log】 na homepage nke APP, họrọ【Eke ndekọ】 ka view data oke uru ise echekwara na esc; Họrọ【Data ndekọ】 ka view data na-agba ọsọ n'ezie; Pịa bọtịnụ【Data Log】 na akuku aka nri elu nke【Data Record】 ibe view data na-agba ọsọ akụkọ ihe mere eme (charve curve).

Ntọgharị ụlọ ọrụ
Jiri ekwentị smart weghachi ụkpụrụ ndabara (naanị ESC paramita) (jiri ngwa HW LINK arụnyere):
Mgbe ịbanye ngwa na guzosie ike na Bluetooth njikọ n'etiti ESC na smart ekwentị, pịa "Factory Tọgharia" na "Parameters" factory tọgharịa gị ESC. Mgbe nke ahụ gasị, biko megharịa oke trotul ahụ.
Jiri bọtịnụ mgba ọkụ iji weghachi aha na paswọọdụ Bluetooth ụlọ ọrụ mmepụta ihe:
Jikọọ esc na batrị ma esc nọ na ọnọdụ adịghị anya. Pịa ma jide bọtịnụ ngbanwe maka ihe dịka sekọnd 8. Igwe ọkụ na-acha uhie uhie na mgba ọkụ ahụ ga-ebu ụzọ gbanye, mgbe ahụ ma RED na GREEN LED ga-enwu, na-egosi na ụlọ ọrụ Bluetooth aha na paswọọdụ eweghachila nke ọma, hapụ bọtịnụ ahụ, esc ga-amalitekwa ozugbo. Aha ụlọ ọrụ ndabere maka Bluetooth bụ: HW_ BLE * * * * na paswọọdụ ndabara bụ 888888

Explanat ion for LED stat us

1. Ọkwa ịgba ọsọ na-egosi:
   1) The trottle trigger bụ na-anọpụ iche ebe na LED ọkụ agbanyụrụ.
   2) Mgbe ị na-aga n'ihu, ọkụ na-acha uhie uhie na-agbanye mgbe niile, na mgbe trottle na-ejupụta na trottle, ọkụ ndụ ndụ na-agbanye.
   3) Mgbe ị na-atụgharị, ọkụ na-acha uhie uhie na-agbanye mgbe niile; Ọ bụrụ na a na-edozi ike ntụgharị na 100%, a na-enwukwa ọkụ ndụ ndụ mgbe trottle dị na njedebe kachasị.
2. Ihe LED pụtara mgbe arụ ọrụ nchebe dị mkpa kpalitere:
   1) Ọkụ na-acha uhie uhie na-egbuke egbuke (otu flash, "☆, ☆, ☆"): na-abanye na obere vol.tage nchebe steeti.
   2) Ọkụ na-acha akwụkwọ ndụ akwụkwọ ndụ na-enwu (otu flash, "☆, ☆, ☆"): na-abanye n'ọnọdụ nchebe oke ọkụ esc.
   3) Ọkụ na-acha akwụkwọ ndụ akwụkwọ ndụ na-egbuke egbuke (flash abụọ, "☆☆, ☆☆, ☆☆"): na-abanye n'ọnọdụ nchebe ọkụ ọkụ ọkụ.
   Mara: Motor overheat protection is effective only when Hobbywing supporting motor (such as EZRUN 5690SD/4990SD G2, 4278SD G2R) is used.
   Mgbe ejiri moto na-akwado enweghị Hobbywing, enweghị ọrụ nchekwa oke ọkụ moto.
   4) Ọkụ na-acha akwụkwọ ndụ akwụkwọ ndụ na-enwu (ọkụ atọ, "☆☆☆, ☆☆☆, ☆☆☆"): na-abanye n'ọnọdụ nchebe ugbu a.
   5) The green ìhè na-egbu maramara (ise flashes, ”☆☆☆☆☆, ☆☆☆☆☆, ☆☆☆☆☆”): na-abanye capacitor ikpo oke ọkụ steeti.

Mgbapụ nsogbu

Nsogbu	Ihe nwere ike ime	Ngwọta
Ìhè ahụ anaghị agbanwu mgbe ike gwụchara, moto anaghị amalite.	1. Batrị voltage abụghị mmepụta na ESC; 2. Mgbanwe ahụ mebiri emebi.	1. Lelee batrị ahụ, yana ma njikọ dị n'etiti batrị na esc dị mma yana ma ọ na-erekwa plọg ahụ nke ọma; 2. Dochie mgba ọkụ.
The motor does not start after power-up, with a “beep- beep-, beep-beep-” warning tone accompanied by a flashing red light (approximately 0.5 seconds for each set of two-tone intervals) .	Ihe ngwugwu batrị voltage anọghị n'ime oke nkwado.	Lelee batrị voltage ma ọ bụ gbanwee batrị maka nnwale.
Mgbe ọkụ gbachara, ọkụ na-acha uhie uhie na-enwu ngwa ngwa.	1. ESC adịghị achọpụta mgbaàmà trottle; 2. A naghị edozi ebe na-anọpụ iche nke ESC nke ọma.	1. Lelee ma ọ bụrụ na etinyere waya trottle n'ime ọwa ziri ezi. Lelee ma agbanyere onye na-ebufe gị. Lelee ma onye nnata ọ dị mma. 2. Megharịa njem trotul ahụ.
Ụgbọ ala ahụ na-aga na ntụgharị ntụgharị mgbe etinyere trottle n'ihu.	Nfefe na ụgbọ ala dị iche	Tọọ ihe paramita “Motor Rotation” gaa n'akụkụ nke ọzọ.
The moto na mberede kwụsịrị ma ọ bụ budata belata mmepụta na-agba ọsọ.	1. nnyonye anya enwere ike; 2. ESC na-abanye n'ime obere voltajitage nchebe steeti; 3. ESC na-abanye n'ime ọnọdụ nchebe oke ọkụ.	1. Lelee ihe kpatara nnyonye anya na onye nata ma lelee ọkwa batrị nke nnyefe; 2. Dochie batrị ma ọ bụrụ na ọkụ na-acha uhie uhie na-egbuke egbuke; 3. Igwe ọkụ na-acha akwụkwọ ndụ na-aga n'ihu na-egbuke egbuke maka nchebe okpomọkụ, biko nọgide na-eji mgbe ESC ma ọ bụ moto okpomọkụ belata (a na-atụ aro ka ibelata ibu na ụgbọ ala).
Moto ahụ sụrụ nsụ na enweghị ike ibido.	1. Ejikọtara moto na-ezighi ezi; 2. Mmejọ ESC (ike akụkụ MOSFET gbara ọkụ).	1. Lelee plọg na ihe ndị na-ere ahịa yana ma usoro nke wires A, B na C ziri ezi .; 2. Kpọtụrụ onye na-ere ahịa ka ọ rụọ ọrụ nrụzi ahụ.
Na-aga n'ihu na-adịkarị, mana ọ bụghị n'azụ.	1. Ebe na-anọpụ iche nke ọwa njikwa trottle na-apụ apụ na mpaghara breeki; 2. The paramita ihe "Na-agba ọsọ mode" na-edozi na-ezighị ezi; 3. ESC mebiri emebi.	1. Recalibrate esc, mgbe trottle trigger bụ na-anọpụ iche ebe, esc ọkụ na-agbanyụ; 2. Tọọ “Ọnọdụ ịgba ọsọ” ka ọ bụrụ “Na-aga n'ihu / jiri breeki tụgharịa”; 3. Kpọtụrụ onye nkesa ka ọ rụọ ọrụ nrụzi.
Enweghị ike ịmecha ntọala njem trotul.	Ndị ESC anataghị akara mgbama ziri ezi.	1. Lelee ma ejikọrọ eriri trottle na onye nnata nke ọma. 2. Ọ bụrụ na servo na-arụ ọrụ nke ọma, ị nwere ike jikọọ eriri trottle nke esc na ọwa nchịkwa iji nweta ule, ma ọ bụ gbanwee transmitter / nnata usoro maka ule ozugbo.

FCC In format ion

Akụrụngwa a na-akwado oke ikuku radieshon FCC ga-apụta maka gburugburu ebe anaghị achịkwa ya. Ekwesịrị ịwụnye akụrụngwa a ma rụọ ọrụ ya na anya kacha nta 20cm n'etiti akụrụngwa na ahụ gị.
FCC ịdọ aka ná ntị
Ngwaọrụ a na-akwado akụkụ 15 nke Iwu FCC. A na-arụ ọrụ n'okpuru ọnọdụ abụọ a:

1. Ngwaọrụ a nwere ike ọ gaghị ebute nnyonye anya na-emerụ ahụ.
2. Ngwaọrụ a ga-anabatarịrị nnyonye anya ọ bụla enwetara, gụnyere nnyonye anya nwere ike ibute ọrụ na-achọghị.
   kpachara anya: Mgbanwe ma ọ bụ mgbanwe ndị otu na-ahụ maka nnabata na-akwadoghị nke ọma nwere ike imebi ikike onye ọrụ iji rụọ ngwa ahụ.

Ụlọ ọrụ SHENZHEN HOBBYWING TECHNOLOGY CO., LTD.
101-402 Ụlọ 4, Yasen Chuangxin Hi-tech Industrial Park,
8 Chengxin Road, Baolong Industrial Town, Longgang District, Shenzhen, China.

Akwụkwọ / akụrụngwa

Ihe njikwa ọsọ eletrọnịkị HOBBYWING EZRUN [pdf] Akwụkwọ ntuziaka onye ọrụ EZRUN MAX8 G2S, EZRUN MAX6 G2, EZRUN MAX5 HV Plus G2, EZRUN Series Brushless Electronic Speed ​​Controller, EZRUN Series, Brushless Electronic Speed ​​Controller, Electronic Speed ​​Controller, Speed ​​Controller, Controller

Ntụaka

• Akwụkwọ ntuziaka onye ọrụ