Getac SN-NSVG7-C01 NFC Controller Module
Akwụkwọ ntuziaka USER
| Smart Approach P/N | SN-NSVG7-C01 | |||||||||||||||||||||||||
| Nkọwa ngwaahịa | Modul RFID | |||||||||||||||||||||||||
Index
Smart Approach Co., Ltd (“S.A.”) retains the right to make changes to its products or specifications to improve performance, reliability or manufacturability. All information in this document, including descriptions of features, functions, performance, technical specifications and availability, is subject to change without notice at any time. While the information furnished herein is held to be accurate and reliable, no responsibility will be assumed by Smart Approach for its use. Furthermore, the information contained herein does not convey to the purchaser of microelectronic devices any license under license under the patent right of any manufacturer.
Smart Approach Co., Ltd is a registered trademark. All other products or service names used in this publication are for identification purposes only, and may be trademarks or registered trademarks of their respective companies. All other trademarks or registered trademarks mentioned herein are the property of their respective holders.
Nzaghachi maka iji akwụkwọ ọ bụla bụ Smart Approach na-anabata ma gbaa ya ume.
- Please contact service@smart-approach.com.tw for your feedback or any ordering inquiry.
- Please contact support@smart-approach.com.tw for any technical question.
Akụkọ ngbanwe
Akụkụ a na-akọwa mgbanwe ndị etinyere na akwụkwọ a. Edepụtara mgbanwe ndị a site na ntughari, malite na mbipụta kachasị ugbu a.
Mgbanwe 1.0
Revision 1.0 of this datasheet was published in Apr. 2023. This was the first publication of the document.
Mgbanwe 1.1
Revision 1.1 of this datasheet was published in Jun. 2023. This was added suspend mode for FW version (FW Version : V1.04).
Mgbanwe 1.2
Revision 1.2 of this datasheet was published in Sep. 2023. Add a description of the supported card types.
1. Okwu mmalite
This document consists of descriptions and specifications for both functional and physical aspects of the SN-NSVG7-C01 PC/SC smart card reader module.
The SN-NSVG7-C01 embeds a USB device interface that enumerates as CCID class. This Class allows SN-NSVG7-C01 be recognized and the driver automatically installed by the host computer, if this CCID driver is available.
2. Ngwaahịa gafereview
SN-NSVG7-C01 is highly integrated transceiver module for contactless reader/writer communication at 13.56MHz.
Ihe atụ na-esonụ na-egosi ọkwa dị elu, ọnyà view of a SN-NSVG7-C01 application.
2.1 Atụmatụ
This section Tables key aspects of the SN-NSVG7-C01 module functionality and design that distinguish it from similar products:
- NXP NFC Controller
- NFC tag support (type 2, type 3, type 4A and type 4B, type5)
- Compliant with ISO/IEC 14443 A/B
- MIFARE classic kaadị
- Compliant with ISO/IEC 15693/18092
- Sony Felica
- Antenna pairing could be customized
- USB interface
*All card types and it’s protocol shall follow NXP’s and NFC forum recommendation.
The verified cards are as follows. Other cards that comply with the protocol shall be subject to actual measurement by the host.
– NXP Mifare Ultralight
– Sony FeliCa Lite
– NXP DESFire EV1 4K
– NXP ICOED SLIX2
- Tag-it PRO 256
2.2 Ngwa
Suggested applications for the SN-NSVG7-C01 module include:
- NFC writer
- Onye na-agụ NFC
- NFC identification
SN-NSVG7-C01 can be connected on a host controller through USB interfaces. The protocol between the host controller and SN-NSVG7-C01 on top of this physical link is the CCID protocol.
Moreover, SN-NSVG7-C01 provides flexible and integrated power management unit in order to preserve energy supporting Powered by the Field.
3. Nkọwa ọrụ
This section provides detailed information about how SN-NSVG7-C01 module works, what configurations and operational features are available.
The following illustration shows the primary functional blocks of SN-NSVG7-C01 module.
4. Nkọwapụta ọkụ eletrik
This section provides the DC characteristics, AC characteristics, recommended operating conditions.
4.1 Nkọwa Pin
The following Table shows the pin description for SN-NSVG7-C01 module.
A na-ejikọta ala njikọ ahụ n'ime ya ma ekwesịrị ijikọ ya na GND na bọọdụ isi.
| PIN Mba. |
Aha | Nkọwa | Ike Ntụaka |
P/I/O | |||||||||||||||||||
| 1 | VBAT | Mpempe akwụkwọ mpịakọta Voltage | 5V | P | |||||||||||||||||||
| 2 | VBAT | Mpempe akwụkwọ mpịakọta Voltage | 5V | P | |||||||||||||||||||
| 3 | DM | USB D- | - | I/O | |||||||||||||||||||
| 4 | DP | USB D + | - | I/O | |||||||||||||||||||
| 5 | MOD_GND | Ala modul | GND | P | |||||||||||||||||||
| 6 | MOD_GND | Ala modul | GND | P | |||||||||||||||||||
| 7 | MOD_GND | Ala modul | GND | P | |||||||||||||||||||
| 8 | PWRON | NFC Module Power Switch | 3.3V/0V | I | |||||||||||||||||||
| 9 | FLASHON | Default H (Fireware Download Mode) | 3.3V/0V | I | |||||||||||||||||||
| 10 | ID Select | Ala modul | GND | P | |||||||||||||||||||
| 11 | Mba | Unused pin could be floating | - | - | |||||||||||||||||||
| 12 | Mba | Unused pin could be floating | - | - | |||||||||||||||||||
4.2 Temperature Maximum Ratings
Edebere nkọwapụta ọkụ maka modul a site na iji bọọdụ ule oyi akwa abụọ.
Tebụl 2 Ogo kacha elu
| Akara | Nkọwa | Uru | Nkeji | ||||||||||||||||||||
| Min | Oke | ||||||||||||||||||||||
| T | Na-arụ ọrụ Okpomọkụ |
-32 | 63 | ℃ | |||||||||||||||||||
| TS | Nchekwa Okpomọkụ |
-40 | 100 | ℃ | |||||||||||||||||||
4.3 DC Electrical Parameters
Edebere nkọwapụta ọkụ eletrik DC maka modul a site na iji bọọdụ nnwale oyi akwa abụọ.
Tebụl 3 DC nkọwapụta ọkụ eletrik
| Akara | Nkọwa | Uru | Nkeji | Rịba ama | |||||||||||||||||||||
| Min | Ụdị | Oke | |||||||||||||||||||||||
| PVDD | Pad Supply Voltage |
4.85 | 5 | 5.15 | Volta | ||||||||||||||||||||
| IVBAT | DC ugbu a | 13 | 15 | 19 | mA | (1) | |||||||||||||||||||
Mara:
(1). Continuous polling average current consumption at 5V (FW Version : V1.04). (2). Polling time (FW Version : V1.04)
A. Suspend mode : 600ms
B. Run mode : 300ms
Ntuziaka nwụnye
Modul RFID
FCC ID: QYLSNNSVG7C01B, IC ID: 10301A-SNNSVG7C01B
- A ga-edozi agba ya na modul ndị ọzọ na-ebufe ya site na ntinye akwụkwọ maka ndị na-ebugharị ndị ahụ nọ mgbe ọ dị mkpa ma ọ bụ na agba nke ndị ọzọ na-ebufe ga-adị dabere na ụkpụrụ KDB dabara adaba gụnyere nke maka mkpughe RF.
- Onye mmekọ usoro ikpeazụ ga-ahụrịrị na ọ nweghị ntuziaka enyere na ntuziaka onye ọrụ ma ọ bụ akwụkwọ ndị ahịa na-egosi otu esi etinye ma ọ bụ wepu onye na-ebufe ya.
- Appropriate labels must be affixed to the product that complies with applicable regulations in all respects. The regulatory label on the final system must include the statement: “Contains FCC ID: QYLSNNSVG7C01B and/or IC: 10301A-SNNSVG7C01B”.
- A user’s manual or instruction manual must be included with the product that contains the text as required by applicable law shall be provided to the Host manufacturer integrators. They may include:
1. USA—Federal Communications Commission
(FCC) Okwu nrubeisi nke FCC:
Ngwaọrụ a na-akwado akụkụ 15 nke Iwu FCC. A na-arụ ọrụ n'okpuru ọnọdụ abụọ a:
(1) Ngwaọrụ a nwere ike ọ gaghị ebute nnyonye anya na-emerụ ahụ, yana (2) ngwaọrụ a ga-anabatarịrị nnyonye anya ọ bụla enwetara, gụnyere nnyonye anya nwere ike ibute ọrụ achọghị.
Ozi nye onye ọrụ:
A nwalere ngwa a wee hụ na ọ dabara na oke maka ngwaọrụ dijitalụ klaasị B, dabere na akụkụ 15 nke Iwu FCC. Emebere oke ndị a iji nye nchebe ezi uche dị na ya megide nnyonye anya na-emerụ emerụ na ntinye ụlọ. Akụrụngwa a na-emepụta, na-eji, ma nwee ike ịgbasa ike ugboro redio. Ọ bụrụ na etinyeghị ya ma jiri ya dabere na ntuziaka ahụ, ọ nwere ike ibute ndabichi na-emerụ ahụ na nkwukọrịta redio. Agbanyeghị, enweghị nkwa na nnyonye anya agaghị eme na otu nrụnye. Ọ bụrụ na akụrụngwa a na-ebute nnyonye anya na-emerụ ahụ na nnabata redio ma ọ bụ telivishọn, nke enwere ike ikpebi site na ịgbanyụ ma gbanye akụrụngwa, a na-agba onye ọrụ ume ịnwale ma mezie nnyonye anya site na otu ma ọ bụ karịa n'ime usoro ndị a:
-Tụgharịa ma ọ bụ bugharịa antenna nnata
-Mbawanye anya n'etiti akụrụngwa na nnata.
-Jikọọ akụrụngwa iji wepụta na sekit dị iche na nke ejikọrọ onye nnata.
Kpọtụrụ onye na-ere ahịa ma ọ bụ onye ọrụ redio/TV nwere ahụmahụ maka enyemaka.
Akpachara anya FCC: Mgbanwe ọ bụla ma ọ bụ mgbanwe ọ bụla nke ndị na-ahụ maka nnabata na-akwadoghị nke ọma nwere ike imebi ikike onye ọrụ iji rụọ akụrụngwa a.
Akwụkwọ ntuziaka onye ọbịa ikpeazụ ga-agụnye nkwupụta nhazi ndị a:
A nwalere ngwa a wee hụ na ọ dabara na oke maka ngwaọrụ dijitalụ klaasị B, dabere na akụkụ 15 nke Iwu FCC. Emebere oke ndị a iji nye nchebe ezi uche dị na ya megide nnyonye anya na-emerụ emerụ na ntinye ụlọ. Akụrụngwa a na-emepụta, na-eji, ma nwee ike ịgbasa ike ugboro redio. Ọ bụrụ na etinyeghị ya ma jiri ya dabere na ntuziaka ahụ, ọ nwere ike ibute ndabichi na-emerụ ahụ na nkwukọrịta redio. Agbanyeghị, enweghị nkwa na nnyonye anya agaghị eme na otu nrụnye. Ọ bụrụ na akụrụngwa a na-ebute nnyonye anya na-emerụ ahụ na nnabata redio ma ọ bụ telivishọn, nke enwere ike ikpebi site na ịgbanyụ ma gbanye akụrụngwa, a na-agba onye ọrụ ume ịnwale ma mezie nnyonye anya site na otu ma ọ bụ karịa n'ime usoro ndị a:
-Tụgharịa ma ọ bụ bugharịa antenna nnata
-Mbawanye anya n'etiti akụrụngwa na nnata.
-Jikọọ akụrụngwa iji wepụta na sekit dị iche na nke ejikọrọ onye nnata.
Kpọtụrụ onye na-ere ahịa ma ọ bụ onye ọrụ redio/TV nwere ahụmahụ maka enyemaka.
Ngwaọrụ a na-akwado akụkụ 15 nke Iwu FCC. Ọrụ dị n'okpuru ọnọdụ abụọ ndị a: (1) Ngwaọrụ a nwere ike ọ gaghị ebute nnyonye anya na-emerụ ahụ, yana (2) ngwaọrụ a ga-anabatarịrị nnyonye anya ọ bụla enwetara, gụnyere nnyonye anya nwere ike bute ọrụ na-achọghị.
2. Canada – Industry Canada (IC)
Ngwaọrụ a na-akwado ụkpụrụ RSS enweghị ikike ụlọ ọrụ Canada. Arụ ọrụ dị n'okpuru ọnọdụ abụọ ndị a: (1) ngwaọrụ a nwere ike ọ gaghị ebute nnyonye anya, yana (2) ngwaọrụ a ga-anabatarịrị nnyonye anya ọ bụla, gụnyere nnyonye anya nwere ike ime ka arụ ọrụ ngwaọrụ ahụ achọghị.
Iwu FCC akụkụ 15.225
Onye na-ebugharị modular bụ naanị FCC nyere ikike maka akụkụ iwu akọwapụtara 15.225 edepụtara na onyinye ahụ, yana na onye nrụpụta ngwaahịa na-ahụ maka nnabata nke iwu FCC ọ bụla nke metụtara onye ọbịa na-anaghị ekpuchiri ya na onyinye asambodo modular transmitter.
The modular transmitter does not have its own RF shielding, and was tested inside a specific platform (FCC model:B360, B360 Pro, B360G3, B360 ProG3, B360Y (Y= 10 characters, Y can be 0-9, a-z, A-Z, “-“, “_” or blank for marketing purpose and no impact safety related critical components and constructions.; Brand: Getac) (IC model:B360, B360 Pro, B360G3, B360 ProG3; Brand: Getac)
Ozi nke antenna
| Akụkụ Iwu FCC | EUT Tx configuration | ||||||||||||||||||||||
| AC Conducted Emission | 15.207 | NFC Link with AC Adapter | |||||||||||||||||||||
| Field strength of Fundamental Emission | 15.225(a)(b)(c) | Njikọ NFC | |||||||||||||||||||||
| Mgbapụta Spurious Radiated | 15.255 (d) 15.209 |
Njikọ NFC | |||||||||||||||||||||
Information on test modes and additional testing requirements, this transmitter is tested in a standalone mobile RF exposure condition and any co-located or simultaneous transmission with other transmitter(s) or portable use will require a separate class II permissive change re-evaluation or new certification. Additional testing, Part 15 Subpart B disclaimer This transmitter module is tested as a subsystem and its certification does not cover the FCC Part 15 Subpart B (unintentional radiator) rule requirement applicable to the final host. The final host will still need to be reassessed for compliance to this portion of rule requirements if applicable. As long as all conditions above are met, further transmitter test will not be required. IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the Host manufacturer integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. Manual Information To the End User The Host manufacturer integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Host manufacturer responsibilities Host manufacturers are ultimately responsible for the compliance of the Host and Module.
The final product must be reassessed against all the essential requirements of the FCC rule such as FCC Part 15 Subpart B before it can be placed on the US market. This includes reassessing the transmitter module for compliance with the Radio and EMF essential requirements of the FCC rules. This module must not be incorporated into any other device or system without retesting for compliance as multi-radio and combined equipment FOR PORTABLE DEVICE USAGE Radiation Exposure Statement: The product comply with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.
Ozi na ụdị ule na ihe nyocha ọzọ chọrọ
This module does not contain shielding, and each host integration is required to comply with a Class II Permissive Change. In addition to RF exposure evaluation based on the exposure conditions and the
co-located transmitters, RF/EMC evaluation needs to be performed as detailed in the table below.
| Akụkụ Iwu FCC | EUT Tx configuration | ||||||||||||||||||||||
| AC Conducted Emission | 15.207 | NFC Link with AC Adapter | |||||||||||||||||||||
| Field strength of Fundamental Emission | 15.225(a)(b)(c) | Njikọ NFC | |||||||||||||||||||||
| Mgbapụta Spurious Radiated | 15.255 (d) 15.209 |
Njikọ NFC | |||||||||||||||||||||
Otu esi eme mgbanwe
Naanị ndị enyere ikike ka ha mee mgbanwe na-anabata. Biko kpọtụrụ anyị ma ọ bụrụ na onye nnabata nnabata na-atụ anya ka a ga-eji modul ahụ dị iche karịa ka enyere ya:
Company Name: Getac Technology Corporation.
Company Address: 5F., Building A, No. 209, Sec.1, Nangang Rd.,Nangang Dist., Taipei City 115018, Taiwan, R.O.C.
Tel. no.: +886-2-2785-7888
Nkọwapụta
- Product Name: SN-NSVG7-C01 RFID Module
- Ugboro: 13.56MHz
- Interface: USB
- Protocol: CCID
- Power Management: Supports Powered by the Field
Ajụjụ A na-ajụkarị (FAQ)
Q: How do I install the SN-NSVG7-C01 module?
A: To install the module, simply connect it to your host controller using the USB interface. The CCID driver should automatically install on the host computer if available.
Q: What are the suggested applications for this module?
A: The suggested applications include NFC writing, NFC reading, and NFC identification.
Akwụkwọ / akụrụngwa
 |
Getac SN-NSVG7-C01 NFC Controller Module [pdf] Akwụkwọ ntuziaka onye ọrụ SNNSVG7C01B, QYLSNNSVG7C01B, snnsvg7c01b, SN-NSVG7-C01 NFC Controller Module, SN-NSVG7-C01, NFC Controller Module, Controller Module, Module |
