Onye njikwa mmemme Coolmay L01S

Daalụ maka ịzụrụ Coolmay LOl S series PLC. Akwụkwọ ntuziaka a na-akọwakarị njirimara ngwaahịa, nkọwapụta izugbe, yana ụzọ wiring nke usoro PLC a. Maka mmemme zuru ezu, biko rụtụ aka na ntuziaka mmemme Cool May LOl S. Enwere ike ịhazi nkọwapụta ndị ọzọ na nnukwu.
Lol S series PLC nwere njirimara ndị a:

1. Ọ na-eji ọkwa agha 32-bit CPU + ASIC dual processors, na-akwado nleba anya na nbudata n'ịntanetị, yana ọsọ igbu ngwa ngwa nke ntuziaka bụ isi bụ 0.24us. Ike mmemme nwere ike iru 30k nzọụkwụ. Ndebanye aha data 12k arụnyere n'ime ya.
2. Mbupụta transistor dị elu pulse 4-axis YO ~ Y3 nwere ike iru 200KHz. Na-akwado 4 setịpụ nke abụọ-phase 200KHz ngwaike ngwa ngwa ngwa ngwa counters.
3. Ọ na-abịa na 1 RS232 na 2 RS485, ma na-akwado mod ụgbọ ala RTU/ASCII, free ọdụ ụgbọ mmiri na ndị ọzọ protocol.
4. Na-akwado ọtụtụ nkwụsịtụ, ntinye ntinye (n'elu ịrị elu, ọdịda ọdịda), nkwụsị oge, nkwụsị nkwurịta okwu, nkwụsị ngwa ngwa ngwa ngwa na nkwụsị ngwa ngwa ngwa ngwa. N'ime ha, nkwụsị ntinye mpụga na-akwado ntinye nkwụsịtụ iri na isii.
5. Ihe kacha 1/0 nwere ike ịkwado isi ihe dijitalụ 168 (isi 40 maka onye ọbịa + 128 isi maka mgbasawanye).
6. Asụsụ mmemme enwere ike ịkwado bụ: ntuziaka, eserese ladder (LD), na eserese ladder (SFC).
7. Enwere ike izo ya ezo pụrụ iche. Ịtọ ntọala paswọọdụ na 12345678 nwere ike machibido ịgụ ihe omume ahụ kpamkpam. [Rịba ama: Naanị 8-bit okwuntughe ka akwadoro]
8. 5.0MM pitch pluggable ọnụ na-eji maka mfe wiring; Enwere ike iji okporo ụzọ DIN (obosara 35mm) na ndozi oghere maka ntinye.

Ozi ngwaahịa

1. Usoro ngwaahịa ụlọ ọrụ LOIS: LOIS series PLC
2. Isi ihe ntinye/mpụta 16:8DA 8 DỊ 24:14 DAlO DO 34:18 DA16DO 40:24 DA16 eme.
3. Nkewa modul M: General njikwa modul
4. Mgbanwe ụdị mmepụta R: ụdị mmepụta relay; T: Ụdị mmepụta transistor; RT: Mmepụta ngwakọ nke transistor relay
5. Ọnụ ọgụgụ kachasị nke ntinye ihe analọgụ bụ 4, nke enwere ike ịhọrọ
6. Ọnụ ọgụgụ kacha elu nke ihe mmepụta ihe analọgụ bụ 2, nke enwere ike ịhọrọ
7. Ụdị ntinye Analog E: Ụdị thermocouple E-ụdị (ụdị K-ụdị/T-ụdị/S-ụdị/J-ụdị, na-akwado okpomọkụ na-adịghị mma) PT: PTlOO PTlOOO: PTlOOO
   NTC: Thermistor (10K/50K/100K) AO: 0-20mA ugbu a A4: 4-20mA dị ugbu a
   V: 0-lOV voltage V: -10~ lOV voltage
8. Ụdị mmepụta ihe analog AO: 0-20mA dị ugbu a A4: 4-20mA ugbu a V: 0-lOV voltage V: -10~ lOV voltage
9. Maka paramita ndị ọzọ, biko rụtụ aka na Tebụl 1: Ntọala ntọala

Ntọala ntọala

Tebụl 1: Ntọala ntọala

Tebụl 2: Igwe ọkụ eletrik

Eletriki parameters
Ntinye voltage	I	AC 220V
		Dijitalụ ntinye egosi
Usoro nkewapụ iche		Optoelectronic njikọ
Ntinye mgbochi		Elu ntinye ọsọ ọsọ 2.4K 0                Nkịtị ntinye 3.3k 0

(Ga n'ihu na tebụl dị n'elu)

Ntụtụ aka nrụpụta nke igwe

Nwụnye na akụkụ mpụga
L01S-16M/24M

Onyonyo 1 eserese nha nwụnye

Ntuziaka imewe eletrọnịkị

Ọdịdị ngwaahịa

Ọgụgụ 2 Ọdịdị Ngwaahịa

1. Oghere nwụnye
2. DC24V ike mmepụta ọnụ ngọngọ
3. Nchikota ọnụ mmepụta dijitalụ
4. Ngosipụta ntinye aka na-agbanwe ọkụ
5. Ngosipụta ngosi ọkụ na-agbanwe agbanwe
6. PWR: na-egosi ike na ọkwa
   RUN: PLC na-enwu n'oge ọrụ
   ERR: Ihe ngosi ọkụ ga-enwu
   mgbe enwere njehie mmemme
7. RS485/RS232
8. RS485
9. ọdụ ụgbọ mmiri mmemme PLC RS232
10. Ndozi eriri
11. RUN/Kwụsị PLC mgba ọkụ ọrụ
12. DIN okporo ígwè (35mm n'obosara) arịọnụ uzo
13. Nchikota ọnụ ntinye ntinye
14. PLC ụdị-C ọdụ ụgbọ mmiri
15. AC220V ike ntinye ọnụ ngọngọ

Ngwa ngwa interface
OV 24V S/S XOO~X07 GND ADO ADl GND AD2 AD3
LN FG CO YOO YOl Cl Y02 Y03 C2 Y04 VOS C3 Y6 Y7 GND DAO

L01S-16MT/16MRT-4AD1DA
OV 24V S/S XOO~X07 XlO~XlS
LN FG CO YOO YOl Cl Y02 Y03 C2 Y04 VOS C3 Y6 Y7 YlO Yll

L01S-24MT/24MRT
OV 24V S/S XOO~X07 XlO~Xl 7 X20 X21 GND ADO ADl GND AD2 AD3
LN FG CO YOO YOl Cl Y02 Y03 C2 Y04~Y07 C3 Y10~Y13 C4 Y14~Yl 7 GND DAO Dal

L01S-34MT/MRT-4AD2DA
OV 24V S/S XOO~X07 XlO~Xl 7 X20~X27
LN FG CO YOO~Y03. Cl Y04-Y07. C2 Y10-Y13. C3 Y14 ~ Yl 7.

L01S-40MT/MR
Onyonyo 3 Eserese Interface Ngwaike

 LOlS Series PLC nkọwapụta pin

Nọmba pin	Signal	Kọwaa
4	RXD	Njikọ
5	TXD	Ziga
8	GND	Ala waya

Ọgụgụ 4 PLC ọdụ ụgbọ mmiri
Nkọwa nke eriri ọnụ: 22-14AWG wires. Ọnụ ọnụ nke usoro ụdị a bụ ọnụ ọnụ pluggable

Ọnụọgụ 5 Port Communication Port

Nkọwa nzikọrịta ozi: 
Na-abịa na ọdụ ụgbọ mmiri mmemme abụọ: ọdụ ụgbọ mmiri Type-C (ọsọ nbudata ngwa ngwa) na RS232 (oghere isi òké 8)
Site na ndabara, enwere 2 RS485, ma ọ bụ enwere ike ịhazi ya dị ka 1 RS485 na 1 RS232.

Nkọwa ọdụ ụgbọ mmiri nkwukọrịta: 

• Oghere Usoro ọdụ ụgbọ mmiri 1: RS232 (ọdụ ụgbọ mmiri okirikiri 8): Na-akwado usoro ọdụ ụgbọ mmiri mmemme Delta DVP, protocol ọdụ ụgbọ mmiri n'efu, yana usoro MODBUS RTU/ASCII;
• Ọdụ ụgbọ mmiri 2: RS485 (ọdụ ụgbọ mmiri Al Bl) / nhọrọ RS232: Na-akwado usoro ọdụ ụgbọ mmiri mmemme Delta DVP, protocol ọdụ ụgbọ mmiri n'efu, yana ụkpụrụ Modbus RTU/ASCII
• Ọdụ ụgbọ mmiri 3: RS485 (ọdụ ụgbọ mmiri A na B): Na-akwado usoro nhazi ọdụ ụgbọ mmiri Delta DVP, protocol ọdụ ụgbọ mmiri na-akwụghị ụgwọ, yana Mod ụgbọ ala RTU/ASCII

* Mgbe PLC na-eje ozi dị ka onye ọbịa, ọ na-akwado nkuzi MODRW, nkuzi MOORD, yana nkuzi MODWR.
Mara: Maka ntọala zuru ezu, biko rụtụ aka na ntuziaka mmemme Cool May LolS PLC

Sekit dakọtara

Ngwa ntinye dijitalụ
Ntinye PLC (X) bụ optocoupler biphasic, ndị ọrụ nwere ike họrọ n'etiti njikọ NPN ma ọ bụ PNP mgbe ị na-eji ya. Otú ọ dị, biko mara na ebe ọ bụ na ọnụ ụzọ ntinye ihe niile jikọtara, modul ma ọ bụ onye ọbịa ọ bụla nwere ike ịnwe naanị otu usoro wiring na enweghị ike ịgwakọta ya.
Ọnụ ọnụ 24V na OV enweelarị ọkụ dị n'ime, nke enwere ike iji ya ozugbo dị ka ntinye maka pointX.

Ọgụgụ 6 lnputWiring Eserese (Nkpọtụ ọsọ dị elu egosiri na foto dị n'elu, kọntaktị nkịtị egosiri na foto a)

NPN ntinye igwe dijitalụ PLC:
Port short circuit: A na-ejikọta S / S nke ntinye ntinye PLC na 24V, na njedebe X na-ejikọta na ọkụ ọkụ OV, na-egosi na enwere ntinye mgbaàmà;
Sistemụ waya abụọ (mgbanwe ndọta): A na-ejikọta ntinye mgba ọkụ PLC na mgba ọkụ magnetik abụọ, yana ogwe dị mma nke ngbanwe magnetik ejikọrọ na ọdụ X na ogwe adịghị mma jikọtara na OV;
Sistemụ waya atọ (ihe mmetụta fotoelectric ma ọ bụ encoder): A na-ejikọ mgba ọkụ PLC na ihe mmetụta fotoelectric ma ọ bụ ihe mkpuchi nke sistemụ waya atọ. A na-ejikọta ọkụ ọkụ nke ihe mmetụta ma ọ bụ koodu ntinye na ogwe aka dị mma nke ike ọkụ, na akara mgbaàmà jikọtara na njedebe X; Encoders na fotoelectric sensọ chọrọ ụdị NPN.

PLC Digital ntinye wiwi PNP:
Port short circuit: A na-ejikọta S / S nke ntinye ntinye PLC na OV, na njedebe X na-ejikọta ya na ike 24V, na-egosi na enwere ntinye mgbaàmà;
Sistemụ waya abụọ (mgbanwe njikwa ndọta): A na-ejikọta ntinye ngbanwe PLC na ngbanwe njikwa ndọta abụọ, yana ogwe adịghị mma nke ngbanwe njikwa magnetik ejikọrọ na ọdụ X na oghere dị mma jikọtara na 24V;
Sistemụ waya atọ (ihe mmetụta fotoelectric ma ọ bụ encoder): A na-ejikọ mgba ọkụ PLC na ihe mmetụta fotoelectric ma ọ bụ ihe mkpuchi nke sistemụ waya atọ. A na-ejikọta ọkụ ọkụ nke ihe mmetụta ma ọ bụ koodu ntinye na ogwe aka dị mma nke ike ọkụ, na akara mgbaàmà jikọtara na njedebe X; Ihe ngbanwe na ihe mmetụta fotoelectric chọrọ ụdị PNP.

Wiring mmepụta dijitalụ
Ọnụọgụ 7 na-egosi eserese sekit kwekọrọ na modul mmepụta relay, yana ọtụtụ otu nke ọdụ mmepụta na-ekewapụ onwe ha n'ụzọ eletrik. A na-ejikọta kọntaktị mmepụta nke otu dị iche iche na sekit ike dị iche iche.
Ihe nhata nke akụkụ mmepụta nke PLC na ụdị mmepụta transistor egosipụtara na Figure 8. Dị ka a pụkwara ịhụ site na ọnụ ọgụgụ ahụ, a na-ekewa njedebe mmepụta n'ọtụtụ dị iche iche, na otu ọ bụla dịpụrụ adịpụ eletrik. Enwere ike ijikọ mmepụta nke otu dị iche iche na sekit ike dị iche iche; Enwere ike iji mmepụta transistor naanị maka sekit ibu ọrụ DC 24V. Usoro wiwi mmepụta bụ NPN, COM common cathode.

Maka ibu inductive jikọtara na sekit AC, sekit mpụga kwesịrị ịtụle RC ozugbo voltage absorption sekit; N'ikwekọ na ibu nke sekit DC, ekwesịrị ịtụle ya ka ọ gbakwunye diode na-agba ọsọ, dị ka egosiri na foto 9.

* Mara: Sekit niile dị n'ime nke egosiri na eserese a bụ naanị maka ntụnye aka
E gosipụtara wiring nke stepper ma ọ bụ servo moto na Figure 10. LOLS series transistor output PLC na-adaba na YO-Y3 dị ka pulse point, na ntụziaka nwere ike ịhazi ya. Dị ka e gosiri na Figure 10. Rịba ama: A2K O resistor ga-ejikọta ya na usoro na DC24V maka ụgbọala SV.

Analog wiring
Enwere ike ịhọrọ usoro L01-16M/34M site na ntinye ntinye analog kachasị nke ADO-AD3, ntinye analog nke DAO na DAl, na njedebe na-adịghị mma jikọtara na GND nke ntinye / mmepụta ihe analog.
Usoro waya abụọ: ogwe aka dị mma nke ọkụ ọkụ na-ejikọta ya na ogwe aka dị mma nke onye na-ebufe ya, na-ejikọta ogwe aka na-adịghị mma nke mgbasa ozi na njedebe AD, na njedebe na-adịghị mma nke ọkụ eletrik na-ejikọta na njedebe GND. N'ozuzu, a na-eji usoro wiring maka ndị na-ebugharị 4-20mA / 0-20mA;
Usoro waya atọ: ogwe aka dị mma nke ọkụ eletrik na-ejikọta ya na ogwe aka dị mma nke onye na-ebufe ya, ọkpụkpụ na-adịghị mma nke ọkụ ọkụ na-eme ka ọ bụrụ otu ihe ahụ, na ntinye akara ngosi nke nnyefe na-ejikọta na njedebe AD;
Usoro waya anọ: A na-ejikọta ogwe ndị dị mma na ndị na-adịghị mma nke ọkụ ọkụ na-ejikọta ya na ogwe ndị dị mma na nke na-adịghị mma nke transmitter, n'otu n'otu. A na-ejikọta okporo osisi dị mma na nke na-adịghị mma nke mmepụta mgbaàmà na-ebufe na njedebe AD na GND, n'otu n'otu; Ejikọrọ ọnụọgụ analọọkụ okpomọkụ na ọdụ AD yana ọnụ GND iche. Ọ bụrụ na ọ bụ PTlOO waya atọ, ọ dị mkpa ka ejikọta ya na waya abụọ wee jikọọ ya.

PLC nhazi mgbochi nnyonye anya

1. Eletrik siri ike na nke na-adịghị ike kwesịrị ịbụ wired iche iche na enweghị ike ịgbakọ ya ọnụ; Mgbe enwere nnyonye anya eletriki siri ike, gbakwunye mgbanaka magnetik na njedebe ọkọnọ ike; Na-arụkwa ọgwụgwọ n'ala nke ọma ma dị irè dịka ụdị casing si dị.
2. Mgbe mgbama analọgụ na-akpaghasị, enwere ike ịgbakwunye 104 ceramic capacitor maka nzacha na nzacha nke ọma na nke ọma.

Mara: Maka ozi zuru ezu karị, biko rụtụ aka na “usoro nhazi mgbochi nnyonye anya PLC” na onye ọrụ gọọmentị websaịtị nke Cool nwere ike

ntụaka mmemme

• Ndebanye aha ndenye Analog (AD na-anọchi anya ntinye analọgụ) yana izi ezi nke 12 bit na-akwado ịgụ ndekọ aha ozugbo:

D [lllO] ~ D [1113] bụ ụkpụrụ ntinye kwekọrọ na ọnụọgụ analog [ADO ~ AD3], ọwa chanel D1114;
Mara: Mgbe ntinye analọgụ nwere ụdị thermocouple, enwere ike iji ọwa 3 kacha elu, ebe AD3 [D1113] bụ ọnọdụ okpomọkụ nke thermocouple.
Mgbe enweghị ụdị thermocouple, enwere ike iji ọwa 4 mee ihe.

Mba.	Deba aha uru ọgụgụ	Ndebanye aha mgbanwe ọwa
ADO	D1110	Malite mgbe D1114-0 ~ D114.3=1
ADl AD2	D1111 D1112
AD3	D1113

Sampntinye aka analog
D1377 bụ ọnụọgụ sampoge ling: nso 0-7, ndabara = 7; Mgbe mgbanwe, malitegharịa ka ọ dị irè. Ọ bụrụ Dl377=1, mgbe ahụ, otu PLC nyocha okirikiri samples otu ugboro ma gbanwee uru na ntinye analọgụ otu ugboro. DlllS bụ ọnụọgụ nke usoro nzacha: nso 0-32767.

• Ndekọ mmepụta ihe analog (DA na-anọchite anya mmepụta analọgụ, yana izi ezi nke 12 bits); Kwado ọrụ ọrụ ndekọ aha ozugbo

Egosiri oke nke ụkpụrụ ntọala na tebụl na-esote:

Mba.	Adreesị ndebanye aha	Tọọ oke ọnụ ahịa	Ihe atụ
DAO	D1116	0-4000	Dee uru ngbanwe akpaka
DAl	D1117	0-4000

Oke akụrụngwa akụrụngwa yana ntuziaka nrụzi ọkụ

Ọnụ ọgụgụ kachasị nke ihe ntụgharị		L01S-16M	L01S-24M	L01S-32M	L01S-40M
Ntinye ntinye X		XOO-X07 Bpoints	XOO-XlS isi iri na anọ	XOO~Xl7 isi iri na abuo	XOO~X27 24 isi
Mgbanwe mmepụta Y		Bpoints YOO-Y07	YOO-Yll lopoints	YOO~ Yl 7 isi iri na isii	YOO~ Yl 7 isi iri na isii
Relay inyeaka M		[MO-M499] Isi ihe 500 maka ojiji izugbe (nwere ike gbanwee iji kwado ike gịtage)/[M500-M991, M2000-M4095] 25 86 isi maka mmezi [M1000-Ml999] 1000 ihe eji eme ihe pụrụ iche
Steeti		[50-59] maka steeti mbụ na 10 isi / 1510-519] maka mmalite nlọghachi azụ na isi 10 / [520-5127] maka idowe 108 isi/[5128-5899] maka ojiji izugbe na isi 771
Oge T		[TO-Tl99] 200 elekere lOOms n'ozuzu ojiji/[T250-T255] 6 elekere lOOms mmezi eji; [T246-T249] 4 elekere lms ngụkọta oge njide oge/[T256-T319) A na-ejikarị eme ihe maka lms na elekere 64; [T200-T239) A na-ejikarị !Oms na elekere 40/ [T240-T245] Jide!Oms na 6pm
Counter C		16 bit incremental counter [CO-C99] 100 isi ihe na-ejikarị/[Cl00-Cl99] 100points debere
		32-bit na-abawanye / mbelata counter [C200-C219] 20 isi ihe a na-ejikarị /[C220-C234] 15 isi na-echekwa
		Igwe na-agba ọsọ dị elu [C235-C245 ngụkọ otu nkeji otu oge] [C246-C250 ọnụọgụ abụọ nke otu ụzọ] [C251-C255 ọnụọgụ abụọ nke abụọ]
Ihe ndekọ data D		(DO-D199) 200 isi maka ojiji n'ozuzu / [D200-D999), [D2000-D11999] 10800 isi maka iji mmezi / [D1000 ~ D1999] 1000 maka ojiji pụrụ iche / [D8000 ~ D8511] 512 isi maka ojiji pụrụ iche
Ihe ndekọ data E, F		[EO-E 7] [FO-F7] A na-eji ya maka ntụnye akara iri na isii
Ejiri ya maka ngalaba JUMP na oku nwere ntụnye		[PO-P255] 256 isi
Akwu		[NO-N7] Ejiri ya maka njikwa isi 8
Kwụsị Na-adịgide adịgide	K	[10 • 0 ~ 17 0 0] 8-nkwụsị ntinye ntinye/[16 [~18 •] 3-pointer nkwụsịtụ/[110 • [~170 •J [] 7-point counter nkwụsịtụ.
		16bit -32, 768-32,76 7		32bit -2,147,483,648-2,147,483,647
	H	16bit 0-FFFFH		32bit 0-FFFFFFFFH

Mwepu ike nke ngwa ngwanrọ LOlS PLC na-adịgide adịgide, nke pụtara na akụrụngwa sọftụwia niile dị na mpaghara njide anaghị efu mgbe agbanyụrụ modul ahụ. Elekere na-adị adị na-eji batrị anaghị agbaji maka ndị ọrụ ngbanwe dị mfe. Niile ike-nke f ọrụ njide ga-ahụrịrị na voltage nke DC24V ike ọkọnọ na ibu dị n'elu 23V, na PC na-kwadoro maka ihe karịrị 2 nkeji, ma ọ bụghị na-adịghị ahụ ike ọrụ gbanyụọ nwere ike ime.
Ngwa mmemme dakọtara na sọftụwia mmemme CoolmayPLC Vtool PRO Maka ozi zuru ezu, rụtụ aka na ntuziaka mmemme Cool may LOlS Series PLC

NDỤMỌDỤ

LOlS series programmable controller (PLC) ntuziaka onye ọrụ
Tupu iji ngwaahịa a, biko jiri nlezianya gụọ akwụkwọ ntuziaka dị mkpa ma jiri ya n'okpuru ọnọdụ gburugburu ebe obibi akọwapụtara na ntuziaka ntuziaka.

1. Biko gosi na ike ọkọnọ voltage nso nke ngwaahịa a (ọka mma ngwaahịa ike ọkọnọ AC220V!) na wiwi ziri ezi tupu ịgbanye ọkụ iji zere mmebi.
2. Mgbe ị na-etinye ngwaahịa a, biko gbaa mbọ mee ka kposara ma ọ bụ cl sie ikeamp okporo ụzọ ndu ka ị ghara ịwepụ.
3. Zere wiring ma ọ bụ ịtọpụ plọg eriri mgbe ị nọ n'ọnọdụ dị ndụ, n'ihi na ọ nwere ike ịkpata ujo eletrik ma ọ bụ mmebi sekit; Mgbe ngwaahịa ahụ na-ewepụta isi ma ọ bụ ụda na-adịghị mma, biko gbanyụọ ọkụ ọkụ ozugbo; Mgbe ị na-edozi oghere ịghasa na wiring, ekwela ka ịkpụ ígwè na isi waya dabara n'ime oghere ventilashị nke onye na-ahụ maka ya, n'ihi na nke a nwere ike ime ka ngwaahịa na-adịghị mma na arụ ọrụ.
4. Ejikọtala eriri ọkụ na eriri nkwukọrịta ọnụ ma ọ bụ tinye ha nso ọnụ. Debe ebe dị anya karịa 10cm; Ekwesịrị ịkewa mmiri siri ike na nke na-adịghị ike na nke ọma na n'ala nke ọma; N'ọnọdụ ndị nwere nnyonye anya siri ike, ekwesịrị iji eriri ndị echedoro maka nzikọrịta ozi na ntinye mgbama ugboro dị elu iji kwalite arụmọrụ mgbochi nnyonye anya. Ọdụ ụgbọ ala FG na igwe a ga-agbanyerịrị nke ọma iji kwalite ikike mgbochi nnyonye anya.
5. Ntinye ngbanwe bụ ụdị mgbanye ọkụ DC24V dị na mpụga (NPN na-agafe agafe), yana mgbama ntinye dịpụrụ adịpụ na ọkọnọ ike. Mgbe ị na-eji ya, S / S kwesịrị ijikọ na 24V ziri ezi nke ike mpụga.
6. Cx nke mmepụta ọnụ ọnụ nke transistor na-agbanwe bụ cathode nkịtị.
7. Biko ewepụla ngwaahịa a ma ọ bụ gbanwee wiring ma ọ dị gị mma. Ma ọ bụghị ya, ọ nwere ike ịkpata arụghị ọrụ, arụghị ọrụ, mfu na ọkụ.
8. Mgbe ị na-etinye na ịkwasa ngwaahịa, biko jide n'aka na ị ga-ebipụ isi iyi ọkụ niile, ma ọ bụghị ya, ọ ga-eme ka akụrụngwa na-arụ ọrụ na-adịghị mma.

Shenzhen Cool May Technology Co., Ltd

• Nọmba ekwentị: 0755-869504 16
  86960332
  2605 1858
  26400661
• Faksị: 0755-26400661-808
• QQ: 800053919
• Email: cm2@coolmay.net
• Web: en.coolmay.com

Akwụkwọ / akụrụngwa

Onye njikwa mmemme Coolmay L01S [pdf] Akwụkwọ ntuziaka onye ọrụ L01S Series Programmable Controller, L01S Series, Programmable Controller, Controller

Ntụaka

• Akwụkwọ ntuziaka onye ọrụ