CREWORKS 10L Ultrasonic Cleaner Instruction Manual

1. Ntuziaka nchekwa dị mkpa

Please read and understand all safety instructions before operating this appliance. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Always connect the unit to a grounded outlet.
• Ejila akụkụ bụ isi na mmiri ma ọ bụ mmiri mmiri ndị ọzọ.
• Do not operate the cleaner without liquid in the tank.
• Debe ebe ụmụaka na-apụghị iru.
• Do not touch the tank or cleaning solution during operation, especially when heated.
• Unplug the unit from the power source before cleaning or servicing.
• Use appropriate cleaning solutions for the items being cleaned. Avoid flammable or corrosive liquids.
• Ensure the lid is closed during operation to prevent splashing.
• Do not disassemble or modify the unit. Contact qualified service personnel for repairs.

2. Ngwaahịa gafereview

The CREWORKS 10L Ultrasonic Cleaner is an industrial-grade cleaning machine designed for thorough and efficient cleaning of various items using 33kHz ultrasonic waves, sweep function, and adjustable temperature control.

Atụmatụ igodo

• 10L ike: Generous tank volume for various cleaning tasks.
• 33kHz Ultrasonic Frequency: Effective for removing tough residues, grime, and grease.
• Sweep Function: Varies cavitation bubble size and intensity to reach complex shapes and blind cavities for uniform cleaning.
• Degas Mode: Removes trapped air bubbles from the cleaning solution to enhance cavitation and cleaning efficiency.
• Ike a na-agbanwe agbanwe: Customizable ultrasonic power settings for delicate instruments or heavy-duty parts.
• Oge ngbanwe: 0-30 minute timer for precise control over cleaning cycles.
• Njikwa okpomọkụ: Heating range of 68-140°F (20-60°C) to optimize cleaning performance.
• 304 Igwe anaghị agba nchara: Durable and corrosion-resistant tank and housing.
• Integrated Drain Port: For convenient and mess-free fluid drainage.

Ihe ngwugwu

Hụ na ihe niile dị ma dị mma mgbe ị na-ewepụ ha.

• 1 x CREWORKS 10L Ultrasonic Cleaner Unit
• 1 x Cdọ Ike
• 1 x Mesh Basket
• 1 x Mmiri mmiri
• 1 x Akwụkwọ ntuziaka

Image: The main CREWORKS 10L Ultrasonic Cleaner unit, showing its stainless steel construction and control panel.

Foto: Ofeview of the CREWORKS 10L Ultrasonic Cleaner, highlighting its timer control, temperature control, ultrasonic power, and heating power.

3. Nhazi

1. Iwepu: Carefully remove the ultrasonic cleaner and all accessories from the packaging. Retain packaging for future storage or transport.
2. Nkwanye: Place the unit on a stable, level, and dry surface. Ensure there is adequate ventilation around the unit. Avoid placing it near heat sources or in direct sunlight.
3. Njikọ ike: Ensure the power switch is in the "OFF" position. Connect the power cord to the unit and then to a grounded electrical outlet.
4. Jupụta tank: Open the lid and fill the stainless steel tank with an appropriate cleaning solution. Ensure the liquid level is between the "MIN" and "MAX" marks. Do not overfill or underfill.
5. Fanye nkata: If using, place the mesh basket into the tank. Place items to be cleaned into the basket, ensuring they are fully submerged but not touching the bottom of the tank.

Image: The ultrasonic cleaner with its mesh basket inserted, ready for items to be placed inside.

4. Ọrụ

Familiarize yourself with the control panel before beginning operation.

Ogwe njikwa gafereview

Foto: nkọwa zuru ezu view of the control panel, showing the ultrasonic, degas, power, timer, and heater settings.

• Ike mgba ọkụ: Na -atụgharị unit na Gbanyụọ/Gbanyụọ.
• Njikwa ngụ oge: Adjusts the cleaning duration from 0 to 30 minutes.
• Njikwa okpomọkụ: Sets the desired heating temperature from 68°F to 140°F (20°C to 60°C).
• Ultrasonic Power Control: Adjusts the intensity of the ultrasonic waves.
• Degas Button: Activates the degas function to remove air from the solution.
• Sweep Button: Activates the sweep function for enhanced cleaning uniformity.

Usoro nhicha

1. Kwadebe ihe: Ensure items are suitable for ultrasonic cleaning. Remove any loose debris before placing them in the basket.
2. Tinye ngwọta: Fill the tank with the appropriate cleaning solution.
3. Tọọ okpomọkụ (nhọrọ): If heating is desired, set the temperature control to the desired value. Allow time for the solution to reach the set temperature.
4. Activate Degas (Recommended): For optimal cleaning, press the Degas button for 1-2 minutes to remove dissolved gases from the fresh cleaning solution. This improves cavitation efficiency.
5. Set Timer and Power: Set the timer to the desired cleaning duration (0-30 minutes) and adjust the ultrasonic power level according to the items being cleaned. Lower power for delicate items, higher for robust items.
6. Malite ihicha: Close the lid and turn on the unit. The ultrasonic cleaning process will begin.
7. Nyochaa ọganihu: Observe the cleaning process. For heavily soiled items, multiple cycles or a change of solution may be necessary.
8. Nhicha Mmecha: Once the timer expires or cleaning is complete, turn off the unit. Carefully remove the basket with the cleaned items.
9. Sachaa na kpoo: Rinse the cleaned items thoroughly with clean water and dry them completely.

Image: Diagram illustrating the full-coverage sweep technology, showing varying cavitation bubbles reaching all surfaces for uniform cleaning.

Image: Visual representation of the degassing mode for enhanced cavitation and the customizable power setting dial.

Image: Comparison photos showing items before and after cleaning with the ultrasonic cleaner, demonstrating its effectiveness on various materials.

5. Nlekọta

Mmezi kwesịrị ekwesị na-eme ka onye na-ehicha ihe nhicha ultrasonic gị dị ogologo ndụ na arụmọrụ kachasị mma.

• Na-ekpochapụ tank ahụ: After each use, especially with dirty solutions, drain the tank using the integrated drain port. Place a suitable container under the drain valve, open the valve, and allow the liquid to flow out.
• Na-ehicha tank ahụ: Rinse the tank thoroughly with clean water after draining. Wipe the interior and exterior of the unit with a soft, damp akwa . Ejila ihe nchacha abrasive ma ọ bụ tinye akụkụ ahụ n'ime mmiri.
• Lid and Basket: Clean the lid and mesh basket with soap and water, then rinse and dry completely.
• Nchekwa: Debe ihe eji arụ ọrụ a n'ebe dị jụụ ma kpọọ nkụ mgbe a naghị eji ya. Hụ na tankị ahụ tọgbọ chakoo ma kpọọ nkụ.
• Nyocha oge niile: Periodically inspect the power cord for any damage. If damaged, discontinue use and contact customer support.

Image: Close-up of the integrated drain port, designed for easy and mess-free liquid removal from the tank.

6. Nchọpụta nsogbu

Lee ngalaba a maka nsogbu ndị a na-enwekarị na ngwọta ha. Ọ bụrụ na nsogbu ahụ anọgide, kpọtụrụ ndị ọrụ nkwado ndị ahịa.

7. Nkọwapụta

Image: Diagram showing the external dimensions of the 10L ultrasonic cleaner and the internal dimensions of the cleaning basket.

8. Akwụkwọ ikike na nkwado

For warranty information, technical support, or service inquiries, please contact CREWORKS customer service. Refer to your purchase documentation for specific warranty terms.

You can visit the official CREWORKS store for more information and support: CREWORKS Store on Amazon