1. Okwu mmalite
The mGYDY K01 EBike Display is a compact and intelligent speedometer cycling computer designed for electric bicycles. It provides essential riding data and control functions, enhancing your ebike experience. This manual provides detailed instructions for installation, operation, and maintenance of your K01 display.
2. Ndakọrịta
The K01 EBike Display is specifically designed for use with BAFANG electric bike motors that utilize the UART communication protocol. It is compatible with BAFANG BBS0102B, G340, G320, and BBSHD mid-drive motors.
The display can be mounted on handlebars with a diameter of φ22.2mm or φ25.4mm.
Mara: Please verify your ebike motor's model number and communication protocol before installation to ensure compatibility.
3. Akụrụngwa Ngwaahịa
- Ihuenyo LCD 2.2 inch: Provides clear, glare-resistant visuals with a 4-level backlight adjustment for optimal visibility in various lighting conditions.
- All-Weather Readability: IP66 waterproof rating ensures durability in rain or snow. Features an auto-dimming backlight and a light sensor to activate headlights at dusk.
- Comprehensive Data Display: Shows real-time speed, single trip distance, total mileage (ODO), maximum speed, average speed, battery level, and power assist (PAS) level.
- Efficient Speed Control: Offers 0-9 adjustable power assist levels to suit different riding conditions and conserve energy.
- Walk Assist Function: Includes a 6km/h walk assist feature for easy maneuvering when not riding.
- Error Code Indication: Displays error codes for convenient system maintenance and troubleshooting.
- Nchedo okwuntughe: Built-in system to secure your ebike from unauthorized use.
4. Ihe ngwugwu
Ngwungwu ahụ gụnyere:
- 1 x mGYDY K01 EBike Display
5. Ntọala na nwụnye
Follow these steps to install your K01 EBike Display:
- Họrọ Ebe Nkwanye: The K01 display is designed to be installed on the left side of the handlebar. Ensure there is sufficient space for secure mounting.
- Dayameta Handlebar: Confirm your handlebar diameter is either 22.2mm or 25.4mm. The display's clamp is designed to fit these sizes.
- Chekwaa ihe ngosi: Open the display clamp, position it on the handlebar, and tighten the screws securely. Ensure the display is oriented correctly for optimal viewing.
- Jikọọ eriri: Locate the 5-pin female circular connector on the display cable. Connect it to the corresponding male connector on your BAFANG motor system. Ensure the connection is firm and secure.
- Njikwa USB: Route the cable neatly along your ebike frame, securing it with cable ties if necessary, to prevent interference with moving parts.
Image: K01 EBike Display mounted on a handlebar, showing the side view ya na clamp. This illustrates the typical installation position.
Foto: N'azụ view of the K01 EBike Display, highlighting the handlebar clamp mechanism and the mounting screw.
Foto: N'okpuru view of the K01 EBike Display, illustrating the integrated cable and the 5-pin female circular connector for connection to the ebike motor.
6. Ntuziaka ọrụ
The K01 display features three buttons for operation: + (Plus), Ike, na - (Minus).
Foto: N'ihu view of the K01 EBike Display with the screen illuminated, displaying current speed, battery charge, and power assist level.
6.1 Gbanyụọ ma ọ bụ gbanyụọ
- Pịa ma jide Ike button to turn the display on or off.
6.2 Adjusting Power Assist (PAS) Levels
- Pịa + button to increase the power assist level (0-9).
- Pịa - button to decrease the power assist level (0-9).
- Level 0 indicates no motor assistance.
6.3 Displaying Mileage and Speed Data
- The display automatically shows real-time speed.
- Mkpirisi pịa Ike button to cycle through different data displays:
- Njem: Single trip mileage.
- ODO: Total mileage.
- Oke: Ọsọ kachasị elu emere n'oge njem ugbu a.
- Ọkara: Average speed during the current trip.
6.4 Njikwa ọkụ isi
- The display features a light sensor that can automatically activate your ebike's headlights at dusk if connected and supported by your ebike system.
- A isiamp indication icon will appear on the display when the headlights are active.
6.5 6km/h Walk Assist Function
- To activate the walk assist function, press and hold the - button. The ebike will move at a steady speed of 6km/h.
- Hapụ ya - button to deactivate the walk assist.
7. Display Functions Overview
The K01 display provides a clear overview of your ebike's status and riding data. Refer to the image below for a visual guide to the display elements.
Image: K01 EBike Display with all segments illuminated, providing a comprehensive view of speed, battery level, PAS level, and other indicators like TRIP, ODO, MAX, AVG, and ERR.
- Ngosipụta batrị: Displays the current battery charge level (1-9 levels).
- Ngosipụta ọsọ: Shows current speed in MPH or KM/H.
- Ngosipụta nlegharị anya: Toggle between TRIP (single trip distance) and ODO (total distance).
- Ọkwa PAS: Indicates the current Power Assist System level (0-9).
- Akara ọkụ isi: Illuminates when headlights are active.
- Error Code (ERR): Displays specific error codes if a system fault occurs.
8. Nkọwapụta
Technical specifications for the mGYDY K01 EBike Display:
Image: Technical drawing of the K01 EBike Display, illustrating its physical dimensions: 78.5mm in length, 49mm in height, and 14mm in thickness.
| Ịnye ọkụ | DC 12-60V |
| Enyere aha ugbu a | 12mA/36V |
| Ibu | 62g |
| Support Levels Mode | 0-9 PAS levels |
| Mmechi nkwụsị ugbu a | <1uA |
| Nkọwapụta ihuenyo | LCD Digital Tube (2.2 inches) |
| Ụdị nzikọrịta ozi | UART (default) |
| Okpomọkụ na-arụ ọrụ | -20°C ~ 70°C |
| Okpomọkụ nchekwa | -30°C ~ 80°C |
| Ọkwa mkpuchi mmiri | IP66 |
| Ebe nchekwa iru mmiri | 30%-70% |
9. Nlekọta
To ensure the longevity and optimal performance of your K01 EBike Display, follow these maintenance guidelines:
- Nhicha: Jiri ihe dị nro, d hichaa ihuenyo na ahụ ngosi ahụ.amp cloth. Avoid using abrasive cleaners or solvents, which can damage the screen or casing.
- Mkpughe mmiri: While the display is IP66 waterproof, avoid submerging it in water or exposing it to high-pressure water jets. Ensure the connector is dry before connecting or disconnecting.
- Okpomọkụ: Operate and store the display within the specified temperature ranges (-20°C to 70°C operating, -30°C to 80°C storage) to prevent damage.
- Nyocha USB: Periodically check the display cable and connector for any signs of wear, damage, or corrosion. Ensure connections remain secure.
- Nchedo anụ ahụ: Avoid dropping the display or subjecting it to strong impacts, which can cause internal or external damage.
10. Nchọpụta nsogbu
The K01 display is designed to indicate error codes (ERR) if a system issue is detected. If you encounter a problem, check the display for any error codes and refer to your BAFANG motor's manual for specific error code meanings and troubleshooting steps.
- Ngosipụta anaghị agbanwu:
- Ensure the ebike battery is charged and turned on.
- Check that the display cable is securely connected to the motor system.
- Verify there is no visible damage to the display or cable.
- Inaccurate Speed/Mileage:
- Ensure the wheel size setting in your ebike controller (if adjustable) is correct.
- Check the speed sensor on your ebike for proper alignment and function.
- Ọkwa PAS anaghị agbanwe agbanwe:
- Verify the buttons are functioning correctly.
- Check for any error codes displayed.
If the issue persists or you encounter an unfamiliar error code, please contact the manufacturer's support for assistance.
11. Akwụkwọ ikike
The mGYDY K01 EBike Display comes with a Akwụkwọ ikike nke onye nrụpụta afọ 1 site na ụbọchị ịzụrụ. Akwụkwọ ikike a na-ekpuchi ntụpọ dị na ngwa na arụ ọrụ n'okpuru ojiji nkịtị. Ọ naghị ekpuchi mmebi nke n'ụzọ na-ezighị ezi, ihe mberede, mgbanwe na-akwadoghị, ma ọ bụ nrụnye na-ekwesịghị ekwesị.
Biko dowe ihe akaebe nke ịzụrụ ihe maka akwụkwọ ikike.
12. Nkwado
For further assistance, technical support, or warranty inquiries, please contact mGYDY customer service through the retailer where you purchased the product or refer to the contact information provided with your purchase.