SQ7S7FA9SDPOAO6C

Automatic Sprinkler Controller

Akara: Generic | Ụdị: SQ7S7FA9SDPOAO6C

Okwu mmalite

Thank you for choosing the Generic Automatic Sprinkler Controller. This device is designed to simplify your watering tasks, ensuring your garden, lawn, or plants receive optimal hydration. Featuring an intuitive LCD display, flexible operating modes, and rain sensing technology, this controller offers efficient and convenient irrigation management.

Ozi nchekwa

Ihe ngwugwu

Chọpụta na akụrụngwa niile dị:

Ngwaahịa gafereview

The sprinkler controller features a clear LCD display and five control buttons for easy programming. It includes a built-in water filter/strainer to prevent debris buildup.

N'ihu view of the Automatic Sprinkler Controller showing the LCD display and control buttons.

Foto: N'ihu view of the Automatic Sprinkler Controller, highlighting the LCD screen and the five control buttons below it. The device is black with a brass-colored connector at the top.

Close-up of the sprinkler controller's LCD display showing time and programming options.

Foto: A zuru ezu view of the controller's LCD display, showing current time (13:00), start time (06:02), and end time (06:08) settings. Various icons for mode, frequency, and battery level are visible.

Melite

1. Ntinye batrị

  1. Chọta ebe batrị dị n'azụ ihe njikwa ahụ.
  2. Mepee mkpuchi ụlọ.
  3. Tinye batrị AAA ọhụrụ abụọ, hụ na polarity ziri ezi (+/-).
  4. Mechie mkpuchi nke batrị batrị nke ọma.

2. Njikọ njikọ

  1. Attach the top connector of the sprinkler controller to your outdoor faucet. Hand-tighten only.
  2. Connect your garden hose or drip irrigation system to the bottom outlet of the controller. Hand-tighten only.
  3. Gbaa mbọ hụ na njikọ niile echekwabara iji gbochie ntapu.
Sprinkler controller attached to an outdoor faucet, ready for use.

Foto: The automatic sprinkler controller connected to a standard outdoor faucet at the top and a garden hose at the bottom, demonstrating proper installation.

Sprinkler controller installed on a faucet with a green background.

Foto: The sprinkler controller shown installed on a silver faucet, with a green background suggesting a garden or lawn setting.

Ntuziaka ọrụ

1. LCD Display Interface

The 2.1-inch LCD display shows current time, watering schedule, battery status, and other settings. Icons indicate the active mode and functions.

2. Ọrụ bọtịnụ

3. Ịtọ oge ugbu a

  1. Pịa M/Clock button until the time display flashes.
  2. Jiri ihe + na - bọtịnụ iji dozie elekere.
  3. Pịa M/Clock again to move to minutes, then adjust with + na -.
  4. Pịa M/Clock to confirm and exit time setting.

4. Programming Automatic Watering Schedule

This controller allows customization of start time, watering duration, and frequency.

  1. Pịa Ngwa button to enter programming mode. The display will show options for Start Time, Duration, and Frequency.
  2. Jiri + na - to adjust the flashing value (e.g., hour for Start Time).
  3. Pịa Ngwa button to move to the next setting (e.g., minutes for Start Time, then Duration, then Frequency).
  4. Oge mmalite: Set the desired time for watering to begin.
  5. Ogologo oge: Set how long the watering cycle will last (e.g., minutes).
  6. Ugboro: Set how often watering occurs (e.g., every X hours or days).
  7. Ozugbo edoziri ntọala niile, pịa bọtịnụ Ngwa button repeatedly until the display returns to the main screen, saving your program.

5. Usoro Ịgba mmiri aka

Iji malite ịgbara mmiri n'èzí usoro mmemme:

  1. Pịa Mbelata mmiri bọtịnụ.
  2. Jiri + na - to set the desired manual watering duration.
  3. Pịa Mbelata mmiri button again to start manual watering. The display will show a countdown.
  4. Iji kwụsị ịgba mmiri n'aka n'oge, pịa bọtịnụ aka Mbelata mmiri bọtịnụ ọzọ.

6. Ọrụ Nkwụsị Mmiri ozuzo

The rain delay function temporarily pauses your watering schedule to conserve water during rainy periods.

  1. While on the main screen, press and hold the Mbelata mmiri bọtịnụ maka sekọnd ole na ole.
  2. The display will show options for rain delay duration (e.g., 24h, 48h, 72h).
  3. Jiri + na - to select the desired delay period.
  4. Pịa Mbelata mmiri button to confirm. The schedule will resume automatically after the delay.
  5. To cancel rain delay, press and hold the Mbelata mmiri button again until the delay icon disappears.
Sprinkler controller in use with various irrigation systems, including sprinklers and hose watering.

Foto: A collage showing the sprinkler controller in the foreground, with background images depicting different watering methods like overhead sprinklers, garden beds being watered, and a person using a hose nozzle, illustrating its versatile application.

Nlekọta

Nchọpụta nsogbu

NsogbuIhe nwere ike imeNgwọta
Onye njikwa anaghị agbanwu.Batrị nwụrụ anwụ ma ọ bụ arụnyere na ezighi ezi.Jiri batrị AAA ọhụrụ dochie batrị ndị ahụ, hụ na ha nwere ike ịhazi polarity nke ọma.
Mmiri anaghị eru.Faucet is off; filter is clogged; low battery; incorrect programming.Ensure faucet is fully open. Clean the water filter. Replace batteries. Check programming for start times and duration.
Ntufu sitere na njikọ.Loose connections; worn washer.Tighten connections by hand. Check and replace rubber washers if damaged.
Watering schedule not activating.Incorrect time setting; program not saved; rain delay active.Verify current time and programmed schedule. Ensure program is saved. Check if rain delay is active and cancel if necessary.

Nkọwapụta

Diagram showing the dimensions of the sprinkler controller in centimeters and inches.

Foto: A diagram illustrating the physical dimensions of the sprinkler controller: 15cm (5.90 inches) in height, 12cm (4.72 inches) in width, and 6cm (2.36 inches) in depth.

Akwụkwọ ikike na nkwado

This product is manufactured by Generic. For specific warranty information or technical support, please refer to the retailer's return policy or contact the seller directly through your purchase platform. Keep your purchase receipt for warranty claims.

Documents - SQ7S7FA9SDPOAO6C – SQ7S7FA9SDPOAO6C

enweghị akwụkwọ dị mkpa