Aninerel 3000W Hybrid Solar Inverter ANJ-3KW-LV-WIFI User Manual

1. Okwu mmalite

This manual provides essential instructions for the installation, operation, and maintenance of your Aninerel 3000W Hybrid Solar Inverter, model ANJ-3KW-LV-WIFI. This device is designed to convert 24V DC power to 110V AC pure sine wave power, suitable for various off-grid and backup power applications. Please read this manual thoroughly before installation and use to ensure safe and efficient operation.

Foto 1.1: N'ihu view of the Aninerel 3000W Hybrid Solar Inverter. The inverter features a blue casing with the Aninerel logo and a central LCD display panel with control buttons.

2. Ntuziaka nchekwa

Na-agbaso ihe ndị a dị mkpa iji belata ihe egwu nke ọkụ eletrik, ọkụ, ma ọ bụ mmerụ ahụ:

• Read all instructions and cautionary markings on the unit and in this manual before installation or operation.
• Do not disassemble the inverter. Refer servicing to qualified personnel. Incorrect reassembly may result in electric shock or fire.
• Iji belata ihe egwu nke ujo eletrik, kwụpụ eriri niile tupu ị nwaa mmezi ma ọ bụ nhicha ọ bụla.
• This inverter is designed for indoor or semi-outdoor use with an IP65 rating. Avoid direct exposure to rain or snow.
• Ensure proper ventilation around the inverter to prevent overheating. Do not block ventilation openings.
• Use appropriate tools and personal protective equipment during installation.
• Ensure all wiring connections are tight and secure to prevent loose connections that can cause overheating.
• Do not connect the inverter to a public utility grid without proper authorization and safety measures.

3. Ngwaahịa gafereview

The Aninerel 3000W Hybrid Solar Inverter integrates a pure sine wave inverter, an MPPT solar charge controller, and a battery charger into one compact unit. It is designed to provide uninterrupted power support.

3.1 Atụmatụ

• 3000W Pure Sine Wave Output: Converts 24V DC to 110V AC, providing stable power for sensitive electronics.
• Integrated 100A MPPT Solar Charge Controller: Maximizes solar energy harvesting with up to 500VDC PV input.
• Flexible Charging and Output Modes: Offers multiple modes (Solar Only, AC Priority, Hybrid Charging; Mains Priority, PV Priority, Hybrid Output) for diverse power management.
• Ndakọrịta Batrị zuru oke: Supports AGM, GEL, Lead-acid, Li-ion, and LiFePO4 24V batteries.
• Ngosipụta LCD Smart: Provides real-time monitoring and allows for easy configuration of system settings.
• Wi-Fi arụnyere n'ime ya: Enables remote monitoring of the inverter status (registration required).
• Nhazi siri ike: IP65-rated enclosure for durability in various environments, with intelligent cooling.
• Nchedo zuru oke: Na-agụnye overvoltage, na -agbadatage, reverse polarity, and short circuit protection.

Ọgụgụ 3.1: N'ihu na azụ Panel gafereview. This diagram labels the LCD display, indicators, function buttons, RS485 communication port, grounding terminal, battery input, dry contact port, built-in Wi-Fi, AC input, AC output, PV input, and power on/off switch.

3.2 Ogwe ihu na egosi

• Ngosipụta LCD: Shows system status, operational data, and configuration settings.
• Ngosipụta chaja: Illuminates to indicate battery charging status.
• Ngosipụta ọnọdụ: Provides general operational status of the inverter.
• Ihe ngosi mmejọ: Lights up to signal system errors or warnings.
• Function Buttons (ESC, UP, DOWN, ENTER): A na-eji ya maka ịnyagharịa menu na ịgbanwe ntọala na LCD.

3.3 Njikọ azụ azụ

• Ọdụ ụgbọ mmiri RS485: For external communication and monitoring.
• Nkwụsị ala: Essential for safety grounding.
• Ntinye batrị: Connects to the 24V battery bank.
• Port kọntaktị akọrọ: Maka njikwa mpụga ma ọ bụ mgbaama.
• Built-in Wi-Fi Module: For wireless monitoring.
• Ntinye AC: Connects to grid utility or generator AC power.
• Mmepụta AC: Na-ejikọ na ibu ụlọ.
• Ntinye PV: Na-ejikọ na usoro panel anyanwụ.
• Mgbanwu ma ọ bụ gbanyụọ ọkụ: Controls the main power to the inverter.

4. Nwụnye & Ntọlite

Proper installation is crucial for the safe and efficient operation of your hybrid solar inverter. Ensure all connections are made by a qualified electrician and adhere to local electrical codes.

4.1 Ịkwanye ihe ntụgharị

• Choose a suitable location that is dry, well-ventilated, and protected from direct sunlight and moisture.
• Ensure sufficient clearance around the inverter for proper airflow and cooling.
• Mount the inverter vertically on a sturdy surface using appropriate fasteners.

4.2 Njikọ njikọ

Follow the wiring diagram carefully. All wiring should be performed with the inverter and all power sources disconnected.

Figure 4.1: Solar System Connection Diagram. This diagram illustrates the connections for solar panels, generator, utility grid, 24V battery, and household loads to the inverter. It shows the PV input, battery input, AC input, and AC output terminals.

4.2.1 Njikọ batrị

• Connect the 24V battery bank to the battery input terminals on the inverter. Ensure correct polarity (+ to + and - to -).
• Use appropriate cable gauges for the battery connections to handle the expected current.
• The ANJ-3KW-LV-WIFI model supports a 24-volt DC system and is recommended for use with batteries of at least 100 ampere-hours capacity.

Figure 4.2: Inverter Battery Connection. This diagram shows wiring configurations for both 12-volt and 24-volt battery systems, emphasizing correct series/parallel connections for the desired voltage.

4.2.2 PV (Solar Panel) Connection

• Connect the solar panel array to the PV input terminals. Observe correct polarity.
• Ensure the total open circuit voltage of the PV array does not exceed 500VDC.
• The MPPT voltage range is 60-450VDC. Ensure your PV array voltage falls within this range for optimal charging.

4.2.3 Njikọ Ntinye AC

• Connect the utility grid or generator AC power to the AC input terminals.
• The inverter supports 110/120VAC input with auto-sensing frequency (50/60Hz).

4.2.4 Njikọ mmepụta AC

• Connect your household loads or appliances to the AC output terminals.
• The inverter provides 3000W continuous AC output at 110/120VAC.

4.3 Ike mbido

• After all connections are secure, switch on the battery breaker first.
• Then, switch on the PV array breaker (if applicable).
• Finally, switch on the AC input breaker (if applicable) and the inverter's main power switch.
• Observe the LCD display for initial boot-up and status indicators.

5. Ọrụ

The inverter offers various configurable settings to optimize power management based on your specific needs.

Ngosipụta na Ntọala LCD 5.1

The LCD display provides real-time information and allows you to configure operational parameters using the function buttons.

• Jiri ihe UP na N'ala bọtịnụ iji lelee nhọrọ menu.
• Pịa Banye ka ịhọrọ nhọrọ ma ọ bụ kwado ntọala.
• Pịa ESC to exit a menu or cancel an action.

5.2 Charging Priority Modes

These settings determine how the battery bank is charged from available power sources.

Figure 5.1: Charger Source Priority. This diagram illustrates three charging priority options: Solar First (solar panels charge first, AC input only if solar is unavailable), Solar and AC Input Simultaneously (both solar and utility charge at the same time), and Solar Only (solar energy is the exclusive charging source).

• Anyanwụ Mbụ: Prioritizes solar power for charging. AC input will only charge the battery when solar power is insufficient or unavailable.
• AC Priority (Utility Priority): Prioritizes AC input (utility or generator) for charging. Solar power will supplement or take over if AC input is unavailable.
• Naanị anyanwụ: The inverter will only charge the battery bank from solar power. AC input will not be used for charging.

5.3 Output Priority Modes

These settings determine the power source for your connected loads.

Figure 5.2: Output Source Priority. This diagram shows three output priority options: Solar First (power from solar first, AC input supplements if solar is insufficient), AC First (redirects AC input to power loads, uses solar/batteries when AC is unavailable), and DC Priority (prioritizes solar first, then battery, then AC input only when voltage drops to a programmable value).

• Solar First (PV Priority): Prioritizes solar power to supply loads. If solar power is insufficient, the battery bank will supplement, and then AC input will be used.
• AC First (Mains Priority): Prioritizes AC input (utility or generator) to power loads. If AC input is unavailable, the inverter will switch to battery power.
• DC Priority (Battery Priority): Prioritizes solar power first, then battery power. AC input will only engage when the battery voltage drops below a programmable threshold.

5.4 Nlekota Wi-Fi

The built-in Wi-Fi module allows for remote monitoring of your inverter's performance and status via a dedicated application. Registration may be required to access this feature.

Figure 5.3: Wi-Fi Monitoring. This image depicts a user monitoring the hybrid inverter's status wirelessly via a smartphone application, highlighting the convenience of the built-in Wi-Fi feature.

6. Nlekọta

Regular maintenance helps ensure the longevity and optimal performance of your Aninerel Hybrid Solar Inverter.

• Nhicha: Jiri ákwà kpọrọ nkụ hichaa mpụta nke inverter mgbe niile. Hụ na oghere ikuku anaghị ekpuchi uzuzu na ihe ruru unyi.
• Njikọ: Annually check all electrical connections (battery, PV, AC input/output) for tightness and corrosion. Tighten any loose connections.
• gburugburu: Ensure the installation environment remains within the specified temperature and humidity ranges.
• Firmware: Lelee onye nrụpụta website for any available firmware updates for improved performance or new features.

7. Nchọpụta nsogbu

Nkebi a na-enye azịza maka nsogbu ndị ị na-enwekarị. Ọ bụrụ na nsogbu ahụ anọgide, kpọtụrụ ndị ọrụ nkwado ndị ahịa.

8. Nkọwapụta

Technical specifications for the Aninerel 3000W Hybrid Solar Inverter ANJ-3KW-LV-WIFI:

9. Akwụkwọ ikike & Nkwado

For warranty information, please refer to the warranty card included with your product or visit the official Aninerel website. For technical support, troubleshooting assistance, or service inquiries, please contact Aninerel customer service through their official channels.

Manufacturer: Shenzhen Anenji Energy Technology Co.,Ltd