WORKPRO Portable Tire Inflator

Okwu mmalite

This manual provides essential information for the safe and effective operation of your WORKPRO Portable Tire Inflator Model W125218A. Please read this manual thoroughly before use and retain it for future reference.

The WORKPRO Portable Tire Inflator is a versatile device designed for inflating tires on cars, motorcycles, bicycles, and various sports balls. It features a digital display, automatic shut-off, multiple inflation modes, and an integrated LED light for convenience and safety.

Ntuziaka nchekwa

• Gụọ ntuziaka niile: Before operating the inflator, read and understand all safety warnings and instructions in this manual.
• Nchedo anya: Always wear safety glasses when operating the inflator to protect against potential debris.
• Nchedo Ntị: The inflator can be loud during operation. Use hearing protection, especially during prolonged use.
• Hapụ ụmụaka: This device is not a toy. Keep it out of reach of children.
• Ojiji nke ọma: Use the inflator only for its intended purpose. Do not attempt to inflate objects beyond their recommended pressure limits.
• ekpo oke ọkụ: The inflator may become hot during extended use. Allow it to cool down between inflation cycles to prevent damage and burns. The air hose and chuck can become very hot.
• Nchekwa batrị: Do not expose the inflator to extreme temperatures or direct sunlight. Do not disassemble or modify the battery pack.
• Ịchaji: Use only the provided charging cable and a compatible power adapter. Do not charge in damp ọnọdụ.
• Nchekwa: Store the inflator in a dry, cool place away from flammable materials.
• Check Tire Pressure Manually: While the inflator has a digital display, it is recommended to verify tire pressure with a separate, calibrated gauge for critical applications.

Ihe ngwugwu

Chọpụta na ihe niile dị na ngwugwu:

• WORKPRO Portable Tire Inflator
• Air Hose with Schrader Valve Connector
• Ihe nkwụnye Valve
• Ihe nkwụnye bọọlụ
• Nozzle Adapter for Inflatables
• USB USB USB (Ụdị-C)
• Akpa nchekwa
• Akwụkwọ ntuziaka onye ọrụ

Ngwaahịa gafereview

Familiarize yourself with the components of your WORKPRO Portable Tire Inflator.

Foto: N'ihu view of the WORKPRO Portable Tire Inflator, showing the digital display, control buttons, and air hose connection point.

Foto: Diagram illustrating the 7500 mAh large battery capacity of the WORKPRO Portable Tire Inflator, capable of inflating multiple car tires on a single charge.

• Ngosipụta Digital: Shows real-time pressure, preset pressure, battery level, and mode.
• bọtịnụ njikwa: Power, Mode selection, Increase/Decrease pressure.
• Njikọ ikuku ikuku: Point where the inflation hose attaches.
• Ọkụ LED: For illumination in low-light conditions.
• Ọdụ ụgbọ mmiri USB-C: Maka ịchaji batrị dị n'ime.
• Ọdụ ụgbọ mmiri USB-A: Functions as a power bank for external devices.

Melite

1. Charging the Inflator

Before first use, fully charge the inflator. The device is powered by three 2500mAh rechargeable batteries.

1. Connect the provided USB-C charging cable to the inflator's charging port.
2. Connect the other end of the cable to a suitable USB power adapter (not included) or a USB port.
3. The digital display will indicate the charging status. A full charge typically takes 3 to 5 hours.
4. Ozugbo chajịrị chaja zuru oke, kwụpụ eriri nchaji.

2. Attaching the Air Hose

Screw the air hose firmly onto the inflator's air outlet port. Ensure it is tight to prevent air leakage during operation.

Ntuziaka ọrụ

1. Ịgbanye / gbanyụọ

• Ike Na: Pịa ma jide bọtịnụ ike (□) for 3 seconds. The digital display will illuminate.
• Gbanyụọ: Pịa ma jide bọtịnụ ike (□) for 3 seconds. The display will turn off. The device will also automatically power off after a period of inactivity.

2. Selecting Inflation Mode and Pressure Unit

Foto: Digital display of the inflator showing different preset inflation modes for car, motorcycle, bicycle, and balls, along with a manual mode.

• Nhọrọ ụdị: Obere pịa bọtịnụ ọnọdụ (M) to cycle through the 5 available inflation modes: Car, Motorcycle, Bicycle, Ball, and Manual. Each mode has a preset default pressure value.
• Ngalaba nrụgide: While in any mode, long press the Mode button (M) to switch between pressure units: PSI, BAR, and KPA.

3. Setting Target Pressure

• After selecting a mode, the preset pressure will be displayed.
• Use the Increase (+) and Decrease (-) buttons to adjust the target pressure to your desired value. The maximum adjustable pressure is 150 PSI.
• The display will flash while adjusting and then stabilize, indicating the set target pressure.

4. Connecting to the Item to be Inflated

• For car/motorcycle/bicycle tires: Screw the Schrader valve connector of the air hose onto the tire valve stem. Ensure a secure, airtight connection.
• For Presta valves (bicycles): Attach the Presta valve adapter to the tire valve, then connect the Schrader valve connector to the adapter.
• For balls/inflatables: Select the appropriate adapter (ball needle or nozzle adapter) and attach it to the Schrader valve connector, then insert into the item.
• Once connected, the digital display will show the current real-time pressure of the item.

5. Starting and Stopping Inflation

Foto: The WORKPRO Portable Tire Inflator connected to a car tire, demonstrating fast inflation capabilities, showing inflation times for different pressure ranges.

• Malite onu oriri: Pịa bọtịnụ Malite/Kwụsị (▶) to begin inflation. The display will show the increasing real-time pressure.
• Mkpuchi akpaaka: The inflator will automatically stop when the preset target pressure is reached.
• Nkwụsị akwụkwọ ntuziaka: You can manually stop inflation at any time by pressing the Start/Stop button (▶) ozo.
• Pressure Indicators: After connecting, the inflator uses three-color indicators:
  • Uhie: Pressure exceeds 110% of the preset value.
  • Akwụkwọ ndụ akwụkwọ ndụ: Pressure is between 90% and 110% of the preset value.
  • Edo edo: Pressure is below 90% of the preset value.

Foto: Close-up of the inflator's digital display highlighting the three-color LED indicators for real-time pressure status (Red, Yellow, Green) and the automatic inflation stop feature.

6. Iji ọkụ LED

Foto: The WORKPRO Portable Tire Inflator being used as an LED flashlight in various scenarios, including illuminating a bicycle path, a dark area, and a car engine bay.

• Short press the Light button (☀) to turn on the LED light.
• Press again to cycle through different light modes (e.g., steady light, flashing, SOS).
• Press a third time to turn off the LED light.

7. Using as a Portable Power Bank

Foto: The WORKPRO Portable Tire Inflator connected via USB to a smartphone, demonstrating its function as a portable power bank for charging electronic devices.

• The inflator can serve as a backup power bank for your electronic devices.
• Connect your device's USB charging cable to the USB-A output port on the inflator.
• Nchaji ga-amalite ozugbo.

Nlekọta

• Nhicha: Jiri nwayọ hichaa mpụta nke inflator, damp akwa . Ejila kemịkalụ siri ike ma ọ bụ ihe mkpocha abrasive.
• Nchekwa: Store the inflator and its accessories in the provided storage bag in a cool, dry place when not in use.
• Nlekọta batrị: To prolong battery life, charge the inflator at least once every three months, even if not in regular use. Avoid fully discharging the battery frequently.
• Nyochaa Hose na nkwụnye: Regularly check the air hose and adapters for any signs of wear, cracks, or damage. Replace if necessary.

Nchọpụta nsogbu

Nkọwapụta

Foto: The WORKPRO Portable Tire Inflator displayed with its various adapters, illustrating its wide range of applications for inflating car, motorcycle, bicycle tires, balls, and swimming rings.

Akwụkwọ ikike na nkwado

WORKPRO products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official WORKPRO websaịtị.

Biko dowe ihe akaebe nke ịzụrụ ihe maka akwụkwọ ikike.