VGR 001 Professional Cordless Hair Clippers User Manual

Okwu mmalite

Thank you for choosing the VGR 001 Professional Cordless Hair Clippers. This manual provides essential information for the safe and effective use, maintenance, and care of your new hair clipper. Please read these instructions thoroughly before first use and keep them for future reference.

Image: The VGR 001 Professional Cordless Hair Clippers, showcasing its sleek design and LED display.

Melite

1. Unboxing na akụrụngwa

Jiri nlezianya wepụ ihe niile dị na ngwugwu ahụ. Hụ na ihe niile dị na ya:

• 1 Mpempe ntutu
• 10 Limiting Combs (1.5/3/4.5/6/9/12/15/18/21/24 mm)
• 1 Karama mmanụ
• 1 Nchaji Ntọala
• 1 ahịhịa na-ehicha
• 1 USB chaja
• 1 US Standard Charging Head
• 1 Akwụkwọ ntuziaka onye ọrụ

Image: All included accessories for the VGR 001 Hair Clipper, including combs, oil, brush, charging base, and cables.

2. Nchaji mbụ

Before first use, fully charge the hair clipper. The device is equipped with a 4600mAh rechargeable lithium-ion battery.

1. Connect the charging cable to the charging base and plug the US standard charging head into a power outlet.
2. Place the hair clipper onto the charging base.
3. The LED display will indicate charging status. A full charge takes approximately 3 hours.
4. Once fully charged, the display will show the maximum operating time (e.g., 260 minutes) and emit 3 beeping sounds.

Image: Diagram showing charging instructions and estimated charging times for the VGR 001 Hair Clipper.

3. Ịtinye Nduzi Combs

Select the desired limiting comb (1.5mm to 24mm) and securely attach it to the clipper blade. Ensure it clicks into place.

Image: The VGR 001 Hair Clipper shown with its 10 limiting combs, illustrating the range of cutting lengths available.

Ntuziaka ọrụ

1. Ịgbanye / gbanyụọ

Press the ON/OFF button located on the front of the clipper to turn the device on or off. The LED display will activate upon powering on.

2. Adjusting Speed (RPM)

The VGR 001 features a high-performance motor with speeds ranging from 7,000 RPM to 9,000 RPM. Turn the center rotary knob to adjust the speed in 100 RPM increments. The LED display will show the current RPM.

Image: The VGR 001 Hair Clipper highlighting its powerful motor and the rotary knob for speed adjustment, with RPM displayed on the screen.

3. Adjusting Taper Lever

The clipper has a 5-position adjustable taper lever, allowing for fine-tuning of cutting lengths from 1.0 mm to 3.0 mm without a comb. This is ideal for blending and fading.

Image: The VGR 001 Hair Clipper showing the adjustable taper lever and its five settings for precise cutting lengths.

4. Iji ọkụ LED

Press the front lighting button to activate a light directly above the blade. This feature assists in precise haircutting, especially in dimly lit conditions.

Image: The VGR 001 Hair Clipper with its LED light activated, illuminating the blade area for improved visibility during use.

5. General Hair Cutting Tips

• Hụ na ntutu dị ọcha ma kpọọ nkụ tupu ị bee ya.
• Always start with a longer comb length than desired and gradually reduce it.
• Bugharịa ihe mkpara ahụ n'akụkụ ebe ntutu isi na-eto ka ọ dị mma ịkpụ ya.
• Overlap strokes to avoid missed spots.
• Use the taper lever for blending and detailing around the ears and neckline.

Nlekọta

1. Na-ehicha agụba

Regular cleaning ensures optimal performance and extends the life of your clipper.

1. Turn off and unplug the clipper before cleaning.
2. Use the provided cleaning brush to remove loose hairs from the blades.
3. For a more thorough cleaning, the blades can be carefully detached (refer to the diagram in the manual for blade removal).
4. Ensure blades are completely dry before reattaching.

2. Ịtinye Agụba mmanụ

Apply a few drops of the included lubricating oil to the blades after each use, or as needed, to maintain sharpness and smooth operation.

1. Apply 1-2 drops of oil across the top of the blades.
2. Turn the clipper on for a few seconds to distribute the oil evenly.
3. Jiri akwa dị nro kpochapụ mmanụ ọ bụla karịrị akarị.

3. Nlekọta batrị

• Zere ka batrị ahụ wụpụ kpamkpam mgbe niile iji mee ka ọ dịruo ogologo ndụ.
• Chekwaa clipper n'ebe dị jụụ, kpọrọ nkụ mgbe ọ naghị eji ya.
• If storing for an extended period, charge the battery to about 50% every few months.

Nchọpụta nsogbu

Nkọwapụta

• Aha nlereanya: VGR 001
• Ihe agụba: Carbon ígwè
• Ọsọ moto: 7,000 - 9,000 RPM (21 speed adjustments)
• Batrị: 4600mAh lithium-ion
• Oge nchaji: Approximately 3 hours (fast charge)
• Oge ọrụ: Ruo nkeji iri abụọ
• Minimum Cutting Length: 1 mm
• Ogologo Mbelata kacha elu: 27 mm (with guide combs)
• Taper Lever Settings: 5 positions (1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm)
• Ngosipụta: Large LED Digital Display (shows RPM, remaining operating time)
• Atụmatụ pụrụ iche: Cordless operation, LED light, Smart Clip technology
• Ngwa gụnyere: Hair clipper, 10 guide combs, oil, cleaning brush, charging base, charging cable, US standard charging head.

Akwụkwọ ikike na nkwado

The VGR 001 Professional Cordless Hair Clippers come with a akwụkwọ ikike otu afọ from the date of purchase. For any issues or inquiries, please contact VGR customer support. We offer 24-hour support to assist you.

For further assistance, please visit the official VGR store or contact your retailer.

Ngwaahịa gafereview Vidiyo