Okin JLDQ.18.137.333D01 Power Recliner Motor Replacement Manual

Okwu mmalite

This manual provides detailed instructions for the installation, operation, and maintenance of the Okin JLDQ.18.137.333D01 motor, designed as a replacement part for power recliner lift chairs. Please read this manual thoroughly before attempting any installation or operation to ensure safe and correct usage.

Ozi nchekwa

• Always disconnect power to the recliner before attempting any installation, removal, or maintenance of the motor. Failure to do so can result in electric shock or injury.
• Hụ na njikọ niile dị nchebe ma dabara nke ọma tupu ị weghachite ike.
• This motor is designed for specific power recliner lift chairs. Verify compatibility with your existing recliner model before installation.
• Debe aka na uwe ndị na-adịghị mma ka ha ghara ịbanye n'ime ihe ndị na-agagharị agagharị mgbe a na-arụ ọrụ.
• Ọ bụrụ na ịmaghị usoro ọ bụla, kpọtụrụ onye ọkachamara tozuru etozu.

Ihe ngwugwu

Ngwungwu ahụ gụnyere ihe ndị a:

• 1 x Okin JLDQ.18.137.333D01 Refined Motor

Image: The Okin JLDQ.18.137.333D01 motor assembly, showing the main motor unit, linear actuator rod, and attached power and control cables.

Ngwaahịa gafereview

The Okin JLDQ.18.137.333D01 is a linear actuator motor designed for power recliner and lift chair applications. It features a robust construction and specific connection types for integration into existing systems.

Foto: A nso nso view of the motor's identification label, displaying the model number JLDQ.18.137.333D01, voltage, maximum load, stroke, duty cycle, and various certifications (CE, cURus, TÜV Rheinland, FCC).

Ụdị njikọ:

• Power Transformer Connection: 2-pin flat round male plug. This connects to the power supply unit.
• Hand Control Connection: 5-pin female plug. This connects to the recliner's hand control unit.

Foto: nkọwa zuru ezu view of the motor's connection cables, highlighting the 5-pin female plug for the hand control and the 2-pin flat round male plug for the power transformer connection.

Ntọala na nwụnye

This section outlines the general steps for replacing an existing recliner motor. Always refer to your recliner's specific manual for detailed disassembly and assembly instructions.

1. Kwụpụ ike: Unplug the recliner from the wall outlet to ensure no power is supplied to the motor or controls.
2. Nweta moto: Carefully turn the recliner over or tilt it to gain access to the underside where the motor is located. You may need to remove fabric covers or panels.
3. Chọpụta njikọ: Note the connections of the existing motor. Typically, there will be a power connection from the transformer and a control connection from the hand remote.
4. Disconnect Old Motor: Disconnect the 2-pin power plug and the 5-pin hand control plug from the old motor.
5. Wepu moto ochie: Unbolt or unclip the old motor from the recliner frame. Pay attention to how it is mounted.
6. Wụnye moto ọhụrụ: Position the new Okin JLDQ.18.137.333D01 motor in the same location as the old one. Secure it using the existing bolts or clips. Ensure it is firmly attached.
7. Connect New Motor:
   • Connect the 2-pin flat round male plug from the power transformer to the corresponding port on the new motor.
   • Connect the 5-pin female plug from the hand control to the corresponding port on the new motor.
8. Njikwa USB: Route all cables safely, ensuring they are not pinched or in the way of moving parts. Use cable ties if necessary.
9. Weghachi ike: Once all connections are secure and the motor is properly mounted, plug the recliner back into the wall outlet.
10. Ọrụ nnwale: Use the hand control to test the recliner's functions (recline, lift). Ensure smooth and correct movement.

Mara: Before replacing the motor, always troubleshoot the switch and power supply first. Verify that the new motor's plug types match your recliner's connections.

Ntuziaka ọrụ

After successful installation, operate your recliner using the existing hand control unit. The Okin JLDQ.18.137.333D01 motor will respond to the commands from your hand control to adjust the recliner's position.

• Press and hold the appropriate button on your hand control to recline or lift the chair.
• Hapụ bọtịnụ ahụ mgbe ọnọdụ achọrọ.
• Avoid continuous operation for extended periods. The motor has a duty cycle of 1 minute ON / 8 minutes OFF to prevent overheating.

Nlekọta

Proper maintenance ensures the longevity and reliable operation of your Okin motor.

• Nhicha: Keep the motor and surrounding area free from dust and debris. Use a dry cloth to wipe down the motor housing. Do not use liquid cleaners directly on the motor.
• Nyocha: Periodically inspect all cables and connections for signs of wear, fraying, or damage. Ensure all mounting bolts are tight.
• mmanu mmanu: The linear actuator rod is typically pre-lubricated. If you notice stiffness or unusual noise, a light application of silicone-based lubricant (avoid petroleum-based products) to the moving rod may be beneficial, but consult a professional if unsure.
• Duty Cycle Adherence: Respect the motor's duty cycle (1 minute ON / 8 minutes OFF) to prevent overheating and premature wear.

Nchọpụta nsogbu

If your recliner is not operating correctly after motor replacement, consider the following common issues:

Ọ bụrụ na usoro nchọpụta nsogbu edozighị nsogbu ahụ, kpọtụrụ ndị ahịa maka enyemaka ọzọ.

Nkọwapụta

Image: A graphic summarizing the key product features and specifications, including stroke length, minimum and maximum dimensions, and connection types, alongside an image of the motor.

Akwụkwọ ikike na nkwado

For warranty information or technical support regarding your Okin JLDQ.18.137.333D01 motor, please refer to the documentation provided with your original recliner or contact Okin customer service directly. You can often find support contact information on the manufacturer's websaịtị ma ọ bụ site na onye na-ere ahịa ngwaahịa gị.

Maka ozi patent, biko gaa na dewertokin.com/patents.