CANDY HOUSE SESAME FACE PRO Smart Lock User Manual

1. Ngwaahịa gafereview

The CANDY HOUSE SESAME FACE PRO is an advanced smart lock system offering multiple secure access methods. This device integrates face recognition, palm vein recognition, fingerprint scanning, IC card compatibility, and traditional PIN code entry to provide flexible and reliable security for your home or office.

Atụmatụ gụnyere:

Ụzọ Mkpọghe Ọtụtụ: Face recognition, palm vein recognition, fingerprint, IC card (FeliCa, MIFARE, NFC compatible), and PIN code.
Oke izi ezi: Designed for high precision with a false recognition rate of less than 0.0001%.
Advanced Face Recognition: Functions effectively in low light conditions and accurately recognizes users with makeup or glasses. Resistant to photo or fake hand attempts.
Extensive User Capacity: Supports up to 100 registered PIN codes, 100 fingerprints, and 1000 IC cards.
Njikwa dị mfe: Simple registration and deletion processes for all access methods.

CANDY HOUSE SESAME FACE PRO Smart Lock with smartphone app interface and face mesh diagram

Image 1.1: The SESAME FACE PRO smart lock shown with its accompanying smartphone application interface and a facial recognition mesh diagram.

2. Ntuziaka Nhazi

Ihe ngwugwu 2.1

Tupu nrụnye, hụ na ihe niile dị na ya:

SESAME FACE PRO Main Unit
3M Adhesive Tape (2 sets)
Battery Cover (1 piece)
Slide Cover (1 piece)
CR123A 3.0V 1800mAh Batteries (2 pieces)
Screws for Main Unit Shell (2 pieces, PM type 1.6x5.0mm)
Screws for Battery Cover (2 pieces, PM type 2.0x9.0mm)
Slide Cover Anti-Slip Screw (1 piece, M 1.4x4mm)
Instruction Manual (1 copy)
Akwụkwọ ikike kaadị (1 oyiri)

2.2 Ntinye batrị

The SESAME FACE PRO requires two CR123A lithium metal batteries. Ensure correct polarity when inserting.

Remove the battery cover from the back of the main unit.
Insert the two CR123A batteries according to the polarity markings.
Replace the battery cover and secure it with the provided screws.

N'ime view of the SESAME FACE PRO showing battery compartment with CR123A batteries installed.

Image 2.1: Proper installation of CR123A batteries within the SESAME FACE PRO unit.

2.3 Ịtinye ngwaọrụ

The SESAME FACE PRO can be mounted using either the included 3M adhesive tape or screws, depending on your door surface and preference.

Choose a suitable location on your door frame or wall adjacent to the door, ensuring it is within reach and at an appropriate height for face recognition.
Clean the mounting surface thoroughly to ensure optimal adhesion if using tape.
Attach the 3M tape to the back of the SESAME FACE PRO unit, or mark screw holes for drilling.
Secure the unit firmly to the chosen surface.

N'ihu view of the SESAME FACE PRO smart lock, showing the keypad, camera, and fingerprint sensor.

Foto 2.2: N'ihu view of the SESAME FACE PRO, highlighting its various sensors.

Foto 2.3: Akụkụ profile of the SESAME FACE PRO, illustrating its compact design.

2.4 Initial Administrator Registration

Upon first use, you must register an administrator. This user will have privileges to add or remove other users and manage settings.

Follow the on-screen prompts or refer to the quick start guide for administrator setup.
Register your face, fingerprint, and a PIN code as the administrator.

3. Ntuziaka ọrụ

3.1 Imeghe ụzọ

The SESAME FACE PRO offers five methods for unlocking:

Nghọta ihu: Approach the device, and it will scan your face for recognition.
Palm Vein Recognition: Present your palm to the sensor for vein pattern verification.
Nchọpụta akara mkpịsị aka: Tinye mkpịsị aka gị edebanyere aha na ihe mmetụta mkpisiaka.
Koodu PIN: Enter your registered PIN code on the keypad.
Kaadị IC: Tap a registered FeliCa, MIFARE, or NFC-compatible card (e.g., Suica, PASMO, Apple Watch, mobile Suica) to the card reader area.

A person approaching a door, with red light beams indicating face recognition in progress from the smart lock.

Image 3.1: Face recognition in action, showing the device scanning a user's face.

A hand presented to the smart lock, with red light beams indicating palm vein recognition in progress.

Image 3.2: Palm vein recognition, demonstrating how to present your hand for scanning.

A finger pressing the fingerprint sensor on the smart lock keypad.

Image 3.3: Fingerprint recognition, showing a finger placed on the sensor.

A hand holding a Suica IC card near the smart lock for card recognition.

Image 3.4: IC card recognition, illustrating a Suica card being used to unlock the device.

3.2 Ịkpọchi ụzọ

To lock the door, simply press the lock button on the keypad. The device will confirm the lock status.

3.3 Adding and Deleting Users

Only the administrator can add or delete users. Refer to the detailed instructions in the full manual for specific steps on managing user access for each recognition method.

Koodu PIN: Up to 100 PIN codes can be registered.
Mkpisiaka: Enwere ike ịdebanye aha ihe ruru akara mkpịsị aka 100.
Kaadị IC: Up to 1000 IC cards can be registered.

4. Nlekọta

4.1 nnọchi batrị

When the battery level is low, the device will provide an alert. Replace the CR123A batteries promptly to ensure continuous operation.

Mepee ebe batrị dịka akọwara na Nkebi nke 2.2.
Wepu batrị ochie.
Insert new CR123A batteries, observing correct polarity.
Mechie ma chekwaa mkpuchi batrị.

4.2 Nhicha

To maintain optimal performance, especially for the sensors, keep the device clean.

Jiri akwa dị nro hichaa elu ya.
Avoid using abrasive cleaners or solvents that could damage the sensors or finish.
Ensure the face recognition camera, palm vein sensor, and fingerprint sensor are free from dust and smudges.

The SESAME FACE PRO smart lock with water droplets on its surface, indicating water resistance.

Image 4.1: The SESAME FACE PRO is designed with a degree of water resistance for outdoor use.

5. Nchọpụta nsogbu

If you encounter issues with your SESAME FACE PRO, try the following common solutions:

Recognition Failure: Ensure the sensors are clean and free from obstructions. Re-register your face, palm, or fingerprint if recognition consistently fails. Ensure adequate lighting for face recognition, though the device is designed for low light.
Ngwaọrụ anaghị anabata: Check battery levels and replace if necessary. If the device remains unresponsive, perform a factory reset (refer to the full manual for instructions).
PIN Code Not Working: Double-check the entered PIN. Ensure the keypad is clean and responsive.
IC Card Not Detected: Ensure the card is compatible (FeliCa, MIFARE, NFC) and placed correctly on the reader. Re-register the card if needed.

Maka okwu na-adịgide adịgide, biko kpọtụrụ nkwado ndị ahịa.

6. Nkọwapụta

Njirimara	Nkọwapụta
Ụdị	Ụlọ swiit
Nọmba nlereanya	860013658205
Akụkụ ngwaahịa (LxWxH)	2.81 x 4.76 x 9 cm (1.1 x 1.87 x 3.54 inch)
Ibu ngwaahịa	250g (0.55 lbs)
Agba	Nwa
Isi Iyi Ike	2 x CR123A Lithium Metal Batteries
Mepee ụzọ	Face Recognition, Palm Vein Recognition, Fingerprint, PIN Code, IC Card (FeliCa, MIFARE, NFC)
Ikike Koodu PIN	Ruo 100
Ike akara mkpịsị aka	Ruo 100
Ikike kaadị IC	Ruo 1000
Ngwa gụnyere	3M Tape (2 sets), Battery Cover, Slide Cover, CR123A Batteries (2), Main Unit Screws, Battery Cover Screws, Slide Cover Anti-Slip Screw, Instruction Manual, Warranty Card

Diagram showing the dimensions of the SESAME FACE PRO smart lock in millimeters.

Image 6.1: Detailed dimensions of the SESAME FACE PRO unit.

7. Akwụkwọ ikike na nkwado

7.1 Ozi akwụkwọ ikike

The CANDY HOUSE SESAME FACE PRO comes with a standard manufacturer's warranty. Please refer to the included warranty card for specific terms, conditions, and duration of coverage. Retain your proof of purchase for warranty claims.

7.2 Nkwado ndị ahịa

For technical assistance, troubleshooting, or any questions regarding your SESAME FACE PRO, please contact CANDY HOUSE customer support. Contact details can typically be found on the official CANDY HOUSE websaịtị ma ọ bụ na kaadị ikike enyere na ngwaahịa gị.