OBEST E1pro Motorcycle Helmet Bluetooth Headset with 2K Camera User Manual

1. Okwu mmalite

Thank you for choosing the OBEST E1pro Motorcycle Helmet Bluetooth Headset. This device integrates a 2K camera, Bluetooth communication system, and FM radio, designed to enhance your riding experience with safety and connectivity. This manual provides detailed instructions for installation, operation, and maintenance to ensure optimal performance.

2. Akụrụngwa Ngwaahịa

• 2K Camera & 140° Wide Angle: Equipped with a 2K/30fps all-glass lens and 140° wide angle for clear video capture. Supports up to 256GB memory expansion (SD card not included).
• Rotatable Host/Lens: Features a 360° rotatable base and 15° horizontally adjustable lens for flexible shooting angles.
• 6-Person 800M Intercom: Supports real-time intercom for up to 6 riders within an 800-meter range using Bluetooth 5.1.
• Intelligent Noise Cancellation: Advanced noise reduction microphone with Active Noise Cancellation (ANC) for clear audio.
• Ọtụtụ ọrụ: Supports music sharing, hands-free calls, volume control, GPS navigation, and FM radio.
• Ogologo ndụ batrị: Built-in 2350 mAh lithium battery provides approximately 6 hours of video recording, 76 hours of intercom/phone use, and 118 hours of Bluetooth/FM radio.
• Ihe mgbochi mmiri: IP65 rated for water and sand resistance.

3. Ihe ngwugwu

Chọpụta na ihe niile dị na ngwugwu:

• Motorcycle Bluetooth Helmet Camera Headset (Host)
• Gear clampnke (x1)
• Helmet clampnke (x1)
• Horn with velcro pads (x2)
• Soft microphone stand (x1)
• Headphone cotton cover (x2)
• Thick horn gasket (x2)
• Velcro pads for soft microphones (x2)
• Microphone cover (x1)
• 1 pair of headphones (hard microphone and soft microphone options)

4. Ngwaahịa gafereview na njikwa

Familiarize yourself with the device's buttons and indicators:

• Recorder On/Off Key: Powers the camera on or off.
• Headphone On/Off Key: Powers the Bluetooth headset on or off.
• Igodo ọrụ ọtụtụ: Used for various operations like pairing, answering calls, and music control.
• One-touch Intercom Button: Initiates or ends intercom communication.
• Mpịakọta Mpịakọta: Na-edozi olu ọdịyo.
• Igodo ọnọdụ: Switches between different modes (e.g., FM radio, music).
• Ihe ngosi ọrụ: Displays device status (e.g., power, recording, pairing).

5. Nwụnye

Follow these steps to install the OBEST E1pro on your helmet:

1. Tinye ihe nkwado ahụ: Choose between the gear clamp or adhesive helmet clamp. Securely attach the chosen clamp to the side of your helmet. Ensure the arrow on the bracket points upwards.
2. Align and Fix: Align the fixed clamps and tighten the screws with the hexagonal wrench provided.
3. Attach the Host: Snap the main unit (recorder) onto the mounted bracket from top to bottom until it clicks into place.
4. Install Microphones and Speakers:
   • Attach the speakers inside the helmet, aligning them with your ears. Use the velcro pads for secure placement.
   • Connect the microphone. Choose between the hard microphone (for open-face helmets) or soft microphone (for full-face helmets) and position it near your mouth.

6. Ntọlite ​​na Pairing

6.1. Gbanyụọ / gbanyụọ

Press and hold the Headphone On/Off Key for 3 seconds to power on or off the headset. Press and hold the Recorder On/Off Key for 3 seconds to power on or off the camera.

6.2. Bluetooth Pairing with Phone

1. Gbaa mbọ hụ na agbanyụrụ ekweisi.
2. Press and hold the Multi-function Key until the indicator light flashes red and blue alternately, indicating pairing mode.
3. On your smartphone, enable Bluetooth and search for "OBEST E1pro".
4. Select the device to pair. Once connected, the indicator light will turn blue.

6.3. Ntọala igwefoto

The E1pro features a 2K/30fps camera with a 140° wide angle lens. Insert a Micro SD card (up to 256GB, not included) into the designated slot before recording. The camera supports loop recording, automatically overwriting the oldest files mgbe kaadị jupụtara.

The camera lens can be adjusted 15° horizontally, and the entire unit can rotate 360° on its base for optimal shooting angles.

6.4. Wi-Fi Direct Connection

For camera settings and video playback, connect your smartphone to the E1pro's Wi-Fi network. Refer to the dedicated app instructions for detailed steps.

7. Ọrụ

7.1. Intercom Communication

The E1pro supports intercom communication for up to 6 riders within an 800-meter range.

1. Ensure all participating E1pro units are powered on and within range.
2. Press the One-touch Intercom Button on your device to initiate intercom pairing.
3. Follow the pairing instructions for multiple units (refer to the full manual for detailed multi-unit pairing sequences).
4. Once connected, press the One-touch Intercom Button to start or end a conversation.

7.2. Music Playback and Sharing

After pairing with your phone, you can play music. Use the Multi-function Key to play/pause and the Volume Knob to adjust volume. The E1pro also supports music sharing with another paired device.

7.3. Oku ekwenti

When a call comes in, the device will announce it. Press the Multi-function Key once to answer, or press and hold to reject. Press the Multi-function Key again to hang up.

7.4. Redio FM

Press the Mode Key to switch to FM radio mode. Use the Volume Knob to scan for stations or adjust volume.

7.5. Nsoro ụzọ GPS

Once paired with your smartphone, GPS voice commands from your navigation app will be transmitted through the headset speakers.

7.6. Noise Cancellation (ANC)

The E1pro features Active Noise Cancellation (ANC) to reduce environmental noise for clearer communication and audio experience.

8. Ndụ batrị na Nchaji

The device is equipped with a 2350 mAh rechargeable lithium battery. Charging is done via the included USB cable.

• Video Recording: Approximately 6 hours
• Intercom/Phone Calls: Approximately 76 hours
• Bluetooth Music/FM Radio: Approximately 118 hours

9. Nkọwapụta

10. Nlekọta

To ensure the longevity and optimal performance of your OBEST E1pro headset, follow these maintenance guidelines:

• Nhicha: Jiri nwayọọ, damp cloth to clean the exterior of the device. Avoid using harsh chemicals or abrasive cleaners.
• Nguzogide mmiri: The device is IP65 rated, meaning it is protected against dust and low-pressure water jets. Do not submerge the device in water. Ensure all ports are securely closed before exposure to moisture.
• Nchekwa: Chekwaa ngwaọrụ ahụ n'ebe dị jụụ, kpọrọ nkụ na-adịghị na ìhè anyanwụ kpọmkwem na oke okpomọkụ.
• Nlekọta batrị: For long-term storage, charge the battery to about 50% every three months to prevent deep discharge.

11. Nchọpụta nsogbu

If you encounter issues with your OBEST E1pro, refer to the following common troubleshooting steps:

• Ngwaọrụ anaghị agba ọkụ: Hụ na batrị ahụ agbajiri achaji. Jikọọ ngwaọrụ ahụ na isi iyi ike wee nwaa ọzọ.
• Enweghị ike ijikọ Bluetooth: Make sure the device is in pairing mode (flashing red and blue). Ensure your phone's Bluetooth is enabled and try restarting both devices.
• Enweghị Ọdịyo/Ọdịyo Na-adịghị Mma: Check volume levels on both the headset and your connected device. Ensure speakers are correctly positioned inside the helmet. Verify microphone connection.
• Intercom Not Connecting: Ensure all units are within range and in intercom pairing mode. Follow the multi-unit pairing instructions carefully.
• Camera Not Recording/Poor Video: Ensure a compatible Micro SD card is inserted and has sufficient free space. Check the camera lens for obstructions or dirt. Format the SD card if issues persist.
• Okwu njikọ Wi-Fi: Ensure the camera's Wi-Fi is enabled. Try restarting the camera and your smartphone's Wi-Fi.

If problems persist, please contact OBEST customer support for further assistance.

12. Akwụkwọ ikike na nkwado

For warranty information and customer support, please refer to the official OBEST websaịtị ma ọ bụ kpọtụrụ onye na-ere ahịa gị. Debe akwụkwọ nnata ịzụrụ maka akwụkwọ ikike.