1. Okwu mmalite
This manual provides detailed instructions for the safe and efficient operation, maintenance, and troubleshooting of your CREWORKS 6L Ultrasonic Cleaner. This device utilizes ultrasonic cavitation to thoroughly clean various items, offering both Degas and Gentle cleaning modes for optimal results. Please read this manual carefully before use and retain it for future reference.
2. Ozi nchekwa
- Jikọọ ngwaọrụ ahụ na ebe a na-etinye ọkụ eletrik n'ala mgbe niile.
- Do not operate the cleaner without liquid in the tank.
- Ensure the power cord is not damaged and avoid pulling it to disconnect.
- Keep the unit away from water or other liquids to prevent electric shock.
- Ejila akụkụ isi na mmiri.
- Kwupu oru tupu ihicha ma obu mezie mmezi.
- Debe ebe ụmụaka na-apụghị iru.
- Use only recommended cleaning solutions. Avoid flammable or corrosive liquids.
- Do not touch the tank or solution during operation, as it may become hot.
3. Ihe ngwugwu
Chọpụta na ihe niile dị na ngwugwu:
- CREWORKS 6L Ultrasonic Cleaner Unit
- Stainless Steel Cleaning Basket
- Mkpuchi
- Ụdọ ọkụ
- 34 fl oz (1000 mL) CREWORKS Heavy Duty Cleaner & Degreaser Solution
- Akwụkwọ ntuziaka (akwụkwọ a)
4. Nhazi
- Nkwanye: Place the ultrasonic cleaner on a stable, flat, and dry surface, away from heat sources and direct sunlight. Ensure adequate ventilation around the unit.
- Jupụta tank: Open the lid and fill the stainless steel tank with an appropriate cleaning solution. Ensure the liquid level is between the 'MIN' and 'MAX' marks. For general cleaning, use water. For enhanced cleaning, use the provided CREWORKS Heavy Duty Cleaner & Degreaser solution diluted at a 1:10 ratio with water.
- Fanye nkata: Place the cleaning basket into the tank.
- Njikọ Ike: Plug the power cord into the unit's power inlet, then connect it to a grounded electrical outlet.
5. Ntuziaka ọrụ
The CREWORKS 6L Ultrasonic Cleaner features intuitive controls for temperature, time, and cleaning modes.
- Ike Na: Turn the main power switch to the 'ON' position. The digital display will illuminate.
- Tọọ okpomọkụ: Use the 'TEMP' knob to set the desired cleaning temperature. The temperature range is 70-210°F (20-100°C). Heating helps improve cleaning efficiency, especially for stubborn grime.
- Nịm Oge: Use the 'TIME' knob to set the cleaning duration. The timer can be set from 1 to 30 minutes. For delicate items, start with a shorter duration.
- Họrọ Ụdị nhicha:
- Degas Mode: Press the 'DEGAS' button. This mode removes dissolved gases from the cleaning solution, which can improve ultrasonic efficiency and prevent oxidation of cleaned objects. It is recommended to run a degas cycle for a few minutes when using fresh solution.
- Ụdị dị nro: Press the 'GENTLE' button. This mode reduces the ultrasonic intensity, providing a softer cleaning action suitable for delicate or sensitive items that might be damaged by full power cavitation.
- Malite ihicha: Once temperature, time, and mode are set, press the 'ON/OFF' button to start the ultrasonic cleaning process. The unit will automatically stop when the timer expires.
- Mgbe ihichachara: Turn off the unit, unplug it, and carefully remove the cleaning basket. Rinse the cleaned items with clean water and dry them thoroughly.
6. Using the CREWORKS Heavy Duty Cleaner & Degreaser Solution
The included 34 fl oz CREWORKS Heavy Duty Cleaner & Degreaser solution is designed to enhance the cleaning power of your ultrasonic cleaner, particularly for stubborn grease, oil, and grime.
- Ntughari: This is a concentrated solution. Dilute it with water at a 1:10 ratio (1 part solution to 10 parts water) before adding it to the ultrasonic cleaner tank.
- Ngwa: Ideal for cleaning engine parts, carburetors, gun parts, electronic components, bicycle chains, metals, and plastics. It effectively removes grease buildup, persistent residues, tight corner grime, and stubborn stains.
- ndakọrịta: Safe for use with most metals, alloys, and plastics. Always test on an inconspicuous area first if unsure.
7. Nlekọta na nhicha
- Na-ekpochapụ tank ahụ: After each use, especially with cleaning solutions, drain the tank. Use the drain valve located on the side of the unit to empty the liquid into a suitable container.
- Na-ehicha tank ahụ: Rinse the stainless steel tank with clean water. Wipe the interior and exterior of the unit with a soft, damp akwa . Ejila ihe nchacha abrasive ma ọ bụ tinye isi ihe n'ime mmiri.
- Nchekwa: Hụ na ihe eji arụ ọrụ a kpọrọ nkụ kpamkpam tupu e debe ya. Debe ya n'ebe dị jụụ ma kpọọ nkụ, ebe anwụ na-anaghị apụta kpọmkwem ma ọ bụ mmiri anaghị eru ya aka.
8. Nchọpụta nsogbu
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Unit anaghị agbanye ọkụ | Enweghị ike ọkọnọ; Eriri ike gbanyụrụ; Gbanyụọ isi mgbanyụ | Check power outlet; Ensure power cord is securely plugged in; Turn main switch to 'ON' |
| Ultrasonic ọrụ adịghị arụ ọrụ | No liquid in tank; Timer not set; Unit overheated | Fill tank with liquid; Set timer; Allow unit to cool down |
| Nsonaazụ ihicha adịghị mma | Incorrect cleaning solution; Insufficient cleaning time/temperature; Overloaded tank; Degas cycle not performed | Use appropriate solution (e.g., CREWORKS Degreaser); Increase time/temperature; Do not overload; Run a degas cycle for fresh solution |
| Solution not heating | Heater not activated; Temperature set too low | Ensure temperature knob is set above ambient; Allow time for heating |
9. Nkọwapụta
- Ụdị: CREWORKS 6L Ultrasonic Cleaner
- Ike tankị: 6 lita
- Ike Ultrasonic: 180W
- Ike ikpo oku: 300W
- Ugboro Ultrasonic: 40 kHz
- Njikwa okpomọkụ: 70-210°F (20-100°C)
- Njikwa ngụ oge: Nkeji 1-30
- Ụdịdị: Degas, Gentle
- Ngwọta nhicha: CREWORKS Heavy Duty Cleaner & Degreaser (34 fl oz)
- ASIN: B0DYJCGRNQ
- Ụbọchị mbụ dị: Febụwarị 26, 2025
10. Akwụkwọ ikike na nkwado
For warranty information, technical support, or service inquiries, please refer to the official CREWORKS websaịtị ma ọ bụ kpọtụrụ ndị ahịa ha ozugbo. Debe nnata nzụta gị dị ka ihe akaebe nke ịzụrụ maka nkwupụta ikike.