BOYA 4-Channel 2.4G Wireless Microphone System User Manual

1. Ngwaahịa gafereview

The BOYA 4-Channel 2.4G Wireless Microphone System is designed for high-quality audio capture with smartphones and other compatible devices. This system features automatic pairing, intelligent noise cancellation, and a long transmission range, making it suitable for various recording scenarios.

Akụkụ ndị bụ isi:

• Sistemụ ikuku ikuku 4-Chanel: Supports up to four microphones simultaneously with automatic pairing for ease of use.
• 200M Transmission Range: Utilizes 2.4G digital frequency for stable connection up to 200 meters in open environments.
• Ogo ọdịyo kachasị elu: Achieves an SNR of 80dB and 48K/16bit recording, with 120dB SPL to prevent distortion.
• Nkagbu mkpọtụ dị elu: Features dual intelligent noise cancellation technology and a windscreen for clear audio in noisy settings.
• Nhazi niile: TX microphone includes a rotating clip and omnidirectional diaphragm. Comes with a portable charging case.

2. Nhazi ntuziaka

2.1 Unboxing na ụgwọ mbụ

Upon unboxing, ensure all components are present: Transmitter(s) (TX), Receiver (RX), and Charging Case. It is recommended to fully charge the transmitters and receiver using the provided charging case before first use.

• Place the transmitters and receiver into the charging case.
• Connect the charging case to a USB-C power source (DC 5V/2A) using a compatible cable.
• Charging indicators on the devices will show charging status. A full charge typically takes approximately 2 hours for the case and individual units.

2.2 Jikọọ onye nnata

The receiver is designed to connect directly to your smartphone or compatible device. For the Lightning version, plug the receiver into the Lightning port of your iPhone or iPad.

2.3 Njikọta akpaaka

The BOYA system features automatic pairing. Once the transmitters are powered on and the receiver is connected to your device, they should automatically establish a connection. A solid indicator light on both the transmitter and receiver typically signifies a successful connection.

3. Ntuziaka ọrụ

3.1 Gbanyụọ/ gbanyụọ

To power on a transmitter, press and hold the power button until the indicator light illuminates. Repeat for all desired transmitters. To power off, press and hold the power button again until the light turns off.

3.2 Microphone Placement

Attach the transmitter to your clothing using the rotating clip. For optimal sound capture, position the microphone approximately 6-8 inches (15-20 cm) from your mouth. The omnidirectional polar pattern captures sound from all directions, providing flexibility in placement.

3.3 Nkagbu mkpọtụ

The system features intelligent noise cancellation. To activate or deactivate noise cancellation, press the dedicated noise reduction button on the transmitter. The indicator light will change color (e.g., static green for enabled, static blue for disabled) to confirm the status.

3.4 Monitoring Audio and Smartphone Speaker Support

When the receiver is connected to your smartphone, you can monitor the audio through headphones connected to the receiver's monitoring port (if available) or directly through the smartphone's speakers. If your phone's speaker is enabled, sound can be played directly without unplugging the receiver.

4. Nlekọta

4.1 Nhicha

Wipe the microphone transmitters, receiver, and charging case with a soft, dry cloth. Do not use liquid cleaners or solvents, as these can damage the devices. Ensure no moisture enters the ports or microphone capsules.

4.2 Nchekwa

Store the system in its charging case or a protective pouch when not in use. Keep it in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity. Avoid storing near strong magnetic fields.

4.3 Nlekọta batrị

To prolong battery life, avoid fully discharging the devices frequently. If storing for an extended period, charge the batteries to approximately 50% every few months.

5. Nchọpụta nsogbu

• Enweghị mpụta ụda:
  • Ensure both transmitter(s) and receiver are powered on and fully charged.
  • Verify the receiver is securely connected to your recording device.
  • Check the recording app settings on your smartphone to ensure the external microphone is selected.
  • Confirm the devices are paired (indicator lights are solid). If not, power cycle both units.
• Ọdịda/nsonarị dị mma:
  • Ensure the microphone is positioned correctly and not obstructed.
  • Activate noise cancellation if in a noisy environment.
  • Move closer to the receiver to reduce the transmission distance.
  • Avoid environments with strong 2.4Ghz interference (e.g., Wi-Fi routers, other wireless devices).
• Ndụ obere batrị:
  • Ensure devices are fully charged before use.
  • Ịrụ ọrụ batrị nwere ike ịdalata ka oge na-aga site na iji ọtụtụ ihe.
• Devices Not Pairing:
  • Power off and then power on both the transmitter(s) and receiver.
  • Ensure they are within close proximity during the initial pairing attempt.

6. Nkọwapụta

Ntughari (TX)

Onye nnata (RX)

Nchaji case

Nkọwapụta ngwaahịa izugbe

7. Akwụkwọ ikike & Nkwado

For detailed warranty information and technical support, please refer to the official BOYA websaịtị ma ọ bụ kpọtụrụ ndị ahịa ha ozugbo. Debe nnata nzụta gị dị ka ihe akaebe nke ịzụrụ ihe maka akwụkwọ ikike ọ bụla.

Manufacturer: BOYA

Maka enyemaka ọzọ, gaa na: BOYA Official Store on Amazon