1. Okwu mmalite
This manual provides detailed instructions for the installation, operation, and maintenance of the MiBOXER PUSH2-3 2.4GHz Wireless Dimming Remote. Please read this manual thoroughly before using the product to ensure proper function and safety.
1.1 Ngwaahịa gafereview
The MiBOXER PUSH2-3 is a 2.4GHz wireless dimming remote designed for controlling compatible LED lighting systems. It offers 3-zone independent dimming control, allowing users to adjust brightness levels across three distinct lighting areas. The remote operates wirelessly, providing flexible placement and ease of use.
Ihe ngwugwu 1.2
- MiBOXER PUSH2-3 Wireless Dimming Remote
- Akwụkwọ ntuziaka onye ọrụ
- Wiring terminals (pre-attached)
Foto 1: Package contents including the MiBOXER PUSH2-3 remote, its box, and the instruction manual.
Foto 2: The MiBOXER PUSH2-3 remote with its pre-attached wires and terminals, shown alongside its packaging.
2. Ozi nchekwa
Biko debe ihe nchekwa nchekwa ndị a iji gbochie mmerụ ahụ ma ọ bụ mebie ngwaahịa a:
- Ewepụla ngwaọrụ ahụ na mmiri ma ọ bụ oke okpomọkụ.
- Ensure all power is disconnected before installation or wiring.
- Ezubere ngwaọrụ a maka naanị ime ụlọ.
- Anwala ịkwasa ma ọ bụ gbanwee ngwaọrụ ahụ.
- Debe ebe ụmụaka na-apụghị iru.
3. Akụrụngwa Ngwaahịa
- 3-Zone Dimming Control: Independently manage brightness for up to three distinct lighting zones.
- Teknụzụ ikuku ikuku 2.4GHz: Provides reliable and interference-free communication with compatible LED systems.
- Ndakọrịta sara mbara: Works with RGB, CCT, and single-color LED systems.
- Nhazi Ergonomic: Features an easy-to-use layout for quick brightness adjustments.
- Achọrọ batrị: Achọrọ batrị CR2032 (anaghị etinye ya).
- Nlekọta kacha nta: Designed for simple operation and long-lasting performance.
4. Nkọwapụta
| Oke | Uru |
|---|---|
| Nọmba nlereanya | PUSH2-3 CCT |
| Ụdị | MGBE |
| Teknụzụ ikuku | 2.4GHz |
| Mpaghara njikwa | 3 Zones (Independent Control) |
| Ngwa dakọtara | PUSH switch to wirelessly control brightness and switch of lights |
| Ụdị batrị | CR2032 (anaghị etinye ya) |
| Agba | Ọcha |
Foto 3: Dimensions of the MiBOXER PUSH2-3 remote, showing height (39mm), width (31mm), and depth (11mm).
Foto 4: Packaging dimensions for the MiBOXER PUSH2-3, indicating a box size of 90mm height, 65mm width, and 21mm depth.
5. Nhazi
5.1 Ntinye batrị
- Chọta ebe batrị dị n'azụ nke ime ime.
- Mepee mkpuchi ụlọ.
- Tinye otu batrị CR2032, hụ na polarity ziri ezi (+/-).
- Mechie mkpuchi nke batrị batrị nke ọma.
5.2 Wiring na njikọ
The PUSH2-3 remote requires connection to a PUSH switch (sold separately) to control compatible MiBOXER 2.4G series light lamps and controls. The remote provides three output zones (Z1, Z2, Z3) and a common ground (GND).
Foto 5: Connection diagram illustrating how to connect the PUSH2-3 remote to a PUSH switch and compatible MiBOXER 2.4G series lights. The remote connects to the PUSH switch via GND, Z1, Z2, and Z3 terminals. A CR2032 battery is required for the remote. The control distance is up to 30 meters.
- Ensure all power to the lighting system is turned off at the circuit breaker before proceeding.
- Connect the GND wire from the PUSH2-3 remote to the common ground terminal of your PUSH switch.
- Connect the Z1, Z2, and Z3 wires from the PUSH2-3 remote to the corresponding zone input terminals on your PUSH switch.
- Refer to the PUSH switch manual for specific wiring instructions for connecting to your MiBOXER 2.4G series light lamps and controls.
- Once all connections are secure, restore power to the lighting system.
Foto 6: The MiBOXER PUSH2-3 remote with its cover removed, showing the internal wiring connections and the battery compartment.
6. Ntuziaka ọrụ
The MiBOXER PUSH2-3 remote works in conjunction with a PUSH switch to control compatible MiBOXER 2.4G series lights.
6.1 Pairing the Remote
To pair the PUSH2-3 remote with your MiBOXER 2.4G series lights, follow the pairing instructions provided with your specific MiBOXER light fixture or controller. Typically, this involves:
- Powering on the light fixture.
- Within a few seconds, pressing the desired zone button on the PUSH switch (which is connected to the PUSH2-3 remote) multiple times.
- The light fixture will flash to confirm successful pairing.
6.2 3-Zone Dimming Control
Once paired, you can control the brightness of your lights using the PUSH switch connected to the PUSH2-3 remote. Each zone (Z1, Z2, Z3) corresponds to a specific group of lights or a single light fixture, depending on your setup.
- Nhọrọ mpaghara: Use the corresponding buttons on your PUSH switch to select the desired lighting zone (Z1, Z2, or Z3).
- Igha: Press and hold the selected zone button to gradually adjust the brightness. Release the button when the desired brightness level is reached.
- Gbanyụọ/ Gbanyụọ: A short press of a zone button will typically toggle the lights in that zone on or off.
Note: Specific button functions and dimming behavior may vary slightly depending on the PUSH switch model and the connected MiBOXER light fixture. Refer to their respective manuals for detailed operation.
7. Nlekọta
- Nhicha: Jiri ákwà dị nro ma kpọọ nkụ hichaa ihe eji arụ ọrụ remote. Ejila ihe nhicha ma ọ bụ ihe mgbaze.
- Ngbanwe batrị: Replace the CR2032 battery when the remote's performance degrades or it stops responding. Ensure proper disposal of used batteries according to local regulations.
- Nchekwa: Ọ bụrụ na ị na-echekwa ihe eji emechi ihe ruo ogologo oge, wepụ batrị ahụ iji gbochie mmiri ịpụ apụ.
8. Nchọpụta nsogbu
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Remote anaghị aza. | Batrị nwụrụ anwụ ma ọ bụ arụnyere na ezighi ezi. | Check battery polarity or replace the CR2032 battery. |
| Lights not dimming or turning on/off. |
|
|
| Njikwa na-aga n'ihu. |
|
|
9. Akwụkwọ ikike na nkwado
This product is manufactured by Miboxer. For warranty information and technical support, please refer to the official MiBOXER websaịtị ma ọ bụ kpọtụrụ onye na-ere ahịa gị. Debe nnata nzụta gị ka ihe akaebe nke ịzụrụ.
Manufacturer: Miboxer
Ụbọchị Mmalite Dị: Nọvemba 5, 2024