Enhulk Pro Cordless Pool Vacuum Instruction Manual

Okwu mmalite

This instruction manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Enhulk Pro Cordless Pool Vacuum. Please read this manual thoroughly before first use and keep it for future reference.

Ozi nchekwa

Always follow basic safety precautions when using electrical appliances, especially near water. Ensure the unit is fully submerged before activation. Do not operate the vacuum out of water for extended periods. Always charge the unit in a dry, covered area. Keep out of reach of children.

Ihe ngwugwu

Hụ na ihe niile dị tupu e nwee mgbakọ:

• Main Vacuum Unit (Fuselage)
• 13.4" Wide Vacuum Head (Triangular Brush Head)
• Telescopic Pole (87.5 inches)
• Short Handle (43 inches)
• chaja
• Filter Bags (2x: 180 micron for large debris, 500 micron for fine particles)
• Akwụkwọ ntuziaka ngwaahịa

Figure 1: Main vacuum unit, telescopic pole, short handle, charger, and filter bags.

Ọgụgụ 2: Zuru ezu view of all included parts for the Enhulk PC18 pool vacuum.

Ntuziaka Mgbakọ

1. Chajịa batrị: Connect the charger to the main vacuum unit. The indicator light will show charging status. A full charge takes approximately 2 hours.
2. Load Brushes (if detached): Ensure the brushes are securely attached to the vacuum head.
3. Wụnye nzacha: Open the cleaning cover and insert the desired filter bag (180 micron for large debris, 500 micron for fine particles) into the filter compartment. Close the cover securely.
4. Connect the Body Part: Attach the main vacuum unit to the vacuum head, ensuring it clicks into place.
5. Insert the Vacuum Brush Head: Secure the assembled vacuum head to the main unit.
6. Tinye aka: Choose between the 87.5-inch telescopic pole for larger pools or the 43-inch short handle for spot cleaning and steps. Insert the chosen handle into the top of the main unit until it locks.

Figure 3: Visual guide for assembling your Enhulk pool vacuum.

Ntuziaka ọrụ

Ojiji mbụ

Before first use, ensure the battery is fully charged. Select the appropriate filter bag based on the type of debris in your pool.

Powering On and Submerging

Press the power button located on the main unit. Submerge the vacuum unit completely into the water. The unit will activate once fully submerged. If the unit is removed from water for more than 60 seconds, it will automatically shut off to prevent damage.

Usoro nhicha

Move the vacuum slowly and steadily across the pool floor, walls, and steps. The 13.4-inch wide head and side brushes are designed to efficiently sweep debris towards the intake. For corners and tight spots, the unit can be used without the wide brush head for precision cleaning.

Figure 4: The 13.4-inch super head and 40W motor deliver 18.5 gal/min suction power.

Figure 5: Dual cleaning head for efficient cleaning of pool floors, corners, and steps.

Figure 6: Powered by a 52Wh high-capacity battery, offering 70 minutes of runtime and 2-hour fast charging.

Figure 7: Ergonomic extended pole and handle reduce strain for comfortable cleaning.

Figure 8: The 87.5-inch telescopic pole ensures cleaning of large pools.

Figure 9: Multi-function vacuum head with side brushes assists in wall cleaning.

Nlekọta

Nchacha nzacha

After each use, or when suction power decreases, remove the filter bag from the unit. Empty collected debris and rinse the filter bag thoroughly with clean water. Allow the filter bag to dry completely before re-installing or storing.

Nchekwa

Store the vacuum in a cool, dry place away from direct sunlight and extreme temperatures. Ensure the unit is clean and dry before storage to prevent mildew or damage.

Figure 10: The package includes both 180 micron and 500 micron filter bags for different debris types.

Nchọpụta nsogbu

Nkọwapụta ngwaahịa

Akwụkwọ ikike na nkwado

Your Enhulk Pro Cordless Pool Vacuum is covered by a manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions. For technical support, troubleshooting assistance, or to order replacement parts, please contact Enhulk customer service via their official website or the contact information provided in the warranty documentation.

Gaa leta Enhulk Store maka ozi ndị ọzọ.