Ozi nchekwa dị mkpa
Biko gụọ ntuziaka niile nke ọma tupu mgbakọ na iji. Debe akwụkwọ ntuziaka a maka ntụnye aka n'ọdịnihu.
- Be cautious when adjusting the legs to avoid tripping.
- Keep the wireless remote and under-bed lighting away from water to prevent electrical shock.
- Ensure all electrical connections are secure and follow local electrical codes.
- Do not allow children or pets to play on or under the adjustable bed frame.
- Do not operate the bed frame if any part is damaged or malfunctioning. Contact customer support immediately.
- Keep the area around the bed clear of obstructions during operation.
Ihe ngwugwu
Nyochaa na akụrụngwa niile dị tupu ịmalite mgbakọ.
- Adjustable Bed Frame (Queen Size)
- Njikwa ime ikuku ikuku
- Adjustable Legs (2 heights: 8 inches and 11.4 inches)
- Mattress Retaining Bar
- Ụdọ ọkụ na nkwụnye
- Akwụkwọ ntuziaka onye ọrụ
Figure 1: Key components of the ESHINE Adjustable Bed Frame.
Ntuziaka nhazi
Assembly typically takes approximately 10 minutes. Two people are recommended for easier setup.
- Wepu akụrụngwa: Carefully remove all parts from the packaging and place them on a clean, flat surface.
- Tinye ụkwụ: Screw the adjustable legs into the designated holes on the underside of the bed frame. Choose your preferred height (8 inches or 11.4 inches). Ensure all legs are securely tightened.
- Install Mattress Retaining Bar: Insert the mattress retaining bar into the slots at the foot of the bed frame. This prevents the mattress from sliding during adjustments.
- Njikọ Ike: Plug the power cord into the bed frame's control box, then plug the adapter into a grounded electrical outlet.
- Ebe Matraasi: Carefully place your mattress onto the adjustable bed frame.
Nyocha 2: N'eluview of the adjustable bed frame features and components.
Ntuziaka ọrụ
Njikwa ime ikuku ikuku
The wireless remote provides convenient control over all bed frame functions. Ensure the remote has fresh batteries and is paired with the control box (refer to pairing instructions if needed).
Figure 3: Wireless Remote Control layout and functions.
- Isi Elu/Ala: Adjusts the head section incline.
- Ụkwụ Elu/Ala: Adjusts the foot section incline.
- Pillow Tilt Up/Down: Adjusts the pillow-tilt section for neck support.
- Zero-G Preset: Activates the Zero Gravity position, which elevates the head and feet to promote circulation and reduce pressure.
- Bọtịnụ dị larịị: Returns the bed to a flat position.
- Anti Snore: Activates a preset position designed to reduce snoring.
- Memory Positions: Save and recall your favorite positions.
- Massage ON/OFF: Turns the massage function on or off.
- Ụdị ịhịa aka n'ahụ: Select from Wave, Pulse, or Full Body Vibration modes.
- Ike ịhịa aka n'ahụ: Adjust between three intensity levels.
- Oge ịhịa aka n'ahụ: Set the massage duration for 10, 20, or 30 minutes.
- Under Bed LED ON/OFF: Controls the under-bed lighting.
- Flash Light ON/OFF: Activates a flashlight feature on the remote.
- Mkpọchi nwa: Locks the remote to prevent accidental adjustments.
Njikwa ngwa Smart
The ESHINE adjustable bed frame can also be controlled via a smartphone application. Download the official ESHINE app from your device's app store.
Figure 4: ESHINE Mobile App interface for bed control.
- Budata ngwa: Chọọ maka 'ESHINE' in your smartphone's app store and install.
- Jikọọ ngwaọrụ: Follow the in-app instructions to pair your smartphone with the bed frame via Bluetooth.
- Ọrụ njikwa: Use the app to adjust positions, activate massage, control lighting, and set alarms.
Ọdụ ụgbọ mmiri USB abụọ
Two USB ports (Type-A and Type-C) are located on the side of the bed frame for convenient charging of your electronic devices.
Figure 5: Illustration of various bed functions including USB ports.
Nlekọta
Regular maintenance ensures the longevity and optimal performance of your adjustable bed frame.
- Nhicha: Jiri mgbasa ozi hichapụ etiti ahụamp akwa . Zere kemịkalụ siri ike ma ọ bụ ihe nhicha abrasive.
- Nlekọta moto: The OKIN motors are designed for durability and generally require no maintenance. Keep the motor area free from dust and debris.
- Batrị dị anya: Replace batteries in the wireless remote when the signal weakens or the flashlight dims.
- Njikwa USB: Ensure all cables are neatly routed and not pinched or tangled.
Nchọpụta nsogbu
If you encounter issues, refer to the following common troubleshooting steps. If the problem persists, contact ESHINE customer support.
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Bed frame does not respond to remote/app. | No power, remote batteries low, remote not paired. | Check power connection. Replace remote batteries. Re-pair remote (refer to pairing instructions in the full manual). |
| Moto na-eme mkpọtụ pụrụ iche. | Obstruction, loose component. | Inspect for obstructions under the bed. Ensure all bolts are tightened. |
| Ọrụ ịhịa aka n'ahụ anaghị arụ ọrụ. | Power issue, motor malfunction. | Check power connection. Ensure massage is turned on via remote/app. |
| Ọdụ USB anaghị agbacha. | Power issue, device compatibility. | Ensure bed frame is powered on. Try a different device or cable. |
Nkọwapụta
| Njirimara | Nkọwa |
|---|---|
| Nha | Queen |
| Akụkụ ngwaahịa | 78.7"L x 59"W x 13.7"H |
| Ụdị | ESHINE |
| Ihe Nlere nke Model | Usoro 5000 |
| Atụmatụ pụrụ iche | Adjustable head, foot, and pillow-tilt, Massage (3 intensity, 3 modes), Smart APP Control, Zero Gravity, Dual USB Ports (Type-A & Type-C), Under-Bed Lighting, Wireless Remote |
| Adjustable Leg Heights | 8 sentimita asatọ, 11.4 sentimita asatọ |
| Frame Ihe | Ọla |
| Onye nrụpụta | Eshine Sleep |
| Ụdị akwụkwọ ikike | Oke |
Figure 6: Queen size dimensions: 59"W x 78.7"L x 13.4"H, Weight: 216 pounds.
Akwụkwọ ikike na nkwado
The ESHINE Adjustable Bed Frame comes with a limited warranty. For specific warranty details, claims, or technical support, please contact ESHINE customer service.
Ndị ọrụ nlekọta ndị ahịa: Refer to the contact information provided with your purchase or visit the official ESHINE websaịtị.