1. Okwu mmalite
The ELKO EP RFSAI-62B-SL/MT is a state-of-the-art switching actuator designed for smart home environments. This unit features two output relays, making it suitable for controlling various consumer appliances and lighting systems. It integrates seamlessly into Matter-compatible ecosystems through the Thread protocol, ensuring broad interoperability with other Matter-certified devices.
Beyond traditional switches and buttons, the RFSAI-62B-SL/MT can also be controlled using wireless wall switches like the RFGB-40-MT. Its robust design allows for a range of up to 200 meters in open air, providing flexible installation options. The device supports a maximum switching capacity of 2000 W (8 A) and utilizes an AgSnO2 + Zero Cross relay contact, optimized for switching lighting loads efficiently.
2. Ozi nchekwa
Please read this manual carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- A ga-arụrịrị nrụnye site n'aka onye ọrụ ọkụ eletrik ruru eru dịka koodu eletriki mpaghara na nke obodo siri dị.
- Disconnect power at the circuit breaker before installing or servicing the device.
- Do not expose the device to moisture, extreme temperatures, or direct sunlight.
- Ensure the device is used within its specified voltage and current ratings (AC 230 V, 8 A).
- Do not attempt to repair or modify the device. Refer all servicing to qualified personnel.
3. Ihe ngwugwu
Chọpụta na ihe niile dị na ngwugwu:
- 1x ELKO EP RFSAI-62B-SL/MT Matter Switching Actuator
- 1 x Akwụkwọ ntuziaka onye ọrụ (akwụkwọ a)
4. Ngwaahịa gafereview
The RFSAI-62B-SL/MT is a compact unit designed for flush mounting. Below is an image of the device with key components highlighted.
Figure 4.1: ELKO EP RFSAI-62B-SL/MT Matter Switching Actuator.
This image shows the ELKO EP RFSAI-62B-SL/MT Matter Switching Actuator. The device is white with black screwless terminals at the bottom. The top surface features the 'iNELS' logo, 'Switch unit', 'RFSAI-62B-SL/MT', and the 'matter' logo. There are labels for 'LED' and 'PROG' indicating an LED indicator and a program button. Wiring diagrams are printed above the terminals, labeled S1, S2, N, L, V2, and V1.
Isi ihe:
- Ihe ngosi LED: Na-enye nzaghachi ọnọdụ.
- PROG (Program/RESET) Button: Used for pairing, resetting, and other programming functions.
- Screwless Terminals: For secure and easy wiring connections.
- S1, S2: Input terminals for external switches/buttons.
- N: Neutral wire connection.
- L: Live wire connection (AC 230V).
- V1, V2: Output terminals for controlled loads (e.g., lighting, appliances).
5. Ntọala na nwụnye
Before proceeding with installation, ensure power is disconnected at the main circuit breaker.
5.1 Ntuziaka waya
- Ịkwụsị ike: Turn off the main power supply to the circuit where the actuator will be installed. Verify with a voltagọ bụ onye nyocha.
- Njikọ Ike:
- Jikọọ Dị ndụ (L) wire (AC 230V) to the 'L' terminal on the actuator.
- Jikọọ Na-anọpụ iche (N) wire to the 'N' terminal on the actuator.
- Connect Loads:
- Connect the load (e.g., light fixture) to the V1 na/ma ọ bụ V2 terminals. Ensure the neutral wire of the load is connected to the main neutral line.
- Connect External Switches (Optional):
- If using external push-buttons or switches, connect them to the S1 na S2 terminals. These inputs can be configured for various control modes.
- Nwụnye nke ọma: Place the actuator securely within a suitable electrical box or enclosure.
- Weghachi ike: Once all connections are secure and verified, restore power at the circuit breaker.
5.2 Matter Network Integration
To integrate the RFSAI-62B-SL/MT into your smart home system, you will need:
- One or more Thread Border Routers connected to your Wi-Fi network.
- A Matter-compatible hub (e.g., Home Assistant, Apple HomeKit, Google Home, Amazon Alexa).
- The associated mobile application for your chosen Matter hub.
Follow the pairing instructions provided by your Matter hub's application. Typically, this involves putting the device into pairing mode (often by pressing the PROG/RESET button for a specified duration) and scanning a QR code or entering a pairing code provided with the device.
6. Ntuziaka ọrụ
Once successfully integrated into your Matter network, the RFSAI-62B-SL/MT can be controlled in several ways:
- Via Matter Hub Application: Use your preferred Matter controller application (e.g., Home Assistant, Apple Home, Google Home) to remotely switch the connected loads ON or OFF.
- Via External Switches: If wired, the S1 and S2 inputs allow control via traditional wall switches or push-buttons. The functionality of these inputs can be configured within your Matter ecosystem.
- Via Wireless Wall Switches: Compatible wireless wall switches, such as the ELKO EP RFGB-40-MT, can be paired with the actuator for convenient local control without additional wiring.
- PROG/RESET Button: While primarily for pairing and resetting, the PROG button may also offer basic toggle functionality depending on the specific firmware and Matter configuration.
7. Nlekọta
The ELKO EP RFSAI-62B-SL/MT is designed for maintenance-free operation. However, consider the following:
- Nhicha: If necessary, gently wipe the device with a dry, soft cloth. Do not use abrasive cleaners or solvents.
- Mmelite femụwe: Periodically check your Matter hub's application for available firmware updates for the actuator to ensure optimal performance and security.
- Ọnọdụ gburugburu: Ensure the device remains within its specified operating environment (temperature, humidity) to prevent damage.
8. Nchọpụta nsogbu
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Ngwaọrụ anaghị aza. | No power; Not paired; Out of Thread network range. | Check power supply; Re-pair the device; Ensure it's within range of a Thread Border Router. |
| Cannot connect to Matter network. | Incorrect pairing procedure; Matter hub issue; Thread Border Router issue. | Refer to your Matter hub's pairing guide; Restart Matter hub and Thread Border Router; Try factory resetting the actuator (long press PROG/RESET button). |
| Connected load does not switch. | Incorrect wiring; Overload; Faulty load. | Verify wiring connections; Check load's power consumption against actuator's max rating (2000W/8A); Test the load independently. |
| External switch (S1/S2) not working. | Incorrect wiring; Switch type not compatible; Configuration issue in Matter app. | Check wiring to S1/S2; Ensure switch is compatible (e.g., momentary push-button vs. toggle); Verify input configuration in your Matter hub. |
9. Nkọwapụta
| Njirimara | Nkọwa |
|---|---|
| Akụkụ ngwaahịa (L x W x H) | 4.3 x 4.4 x 2.2 cm (1.69 x 1.73 x 0.87 inch) |
| Onye nrụpụta | ELKO EP |
| Nọmba nlereanya | 8975 (Internal), RFSAI-62B-SL/MT (Product) |
| Ụdị ọrụ | Eletriki |
| Ogo dị ugbu a | 8 A (Max. 2000 W) |
| Nrụ ọrụ Voltage | 230 volts (AC) |
| Ụdị kọntaktị | Normally Closed (AgSnO2 + Zero Cross relay) |
| Ụdị njikọ | Oke ugwu |
| Ngbanwe Ụdị | Dimmer (Note: Product description indicates a switching unit, not a dimmer) |
| Ụdị njedebe | Wago (Screwless terminals) |
| Ihe onwunwe | Plastic |
| Protocol nzikọrịta ozi | Matter (Application Protocol), Thread (Communication Protocol) |
| Ọnụọgụ nke mgba ọkụ | 2 (8 A/AC1) |
| Oke | Up to 200 m (open air) |
10. Akwụkwọ ikike na nkwado
ELKO EP products are manufactured to the highest quality standards. For warranty information and technical support, please refer to the official ELKO EP websaịtị ma ọ bụ kpọtụrụ onye nkesa mpaghara gị.
Maka enyemaka ọzọ, biko gaa na: www.elkoep.com
