WLLKIY 5.6KW Hybrid Solar Power Inverter User Manual

1. Okwu mmalite

This manual provides essential information for the safe and efficient operation of your WLLKIY 5.6KW Hybrid Solar Power Inverter. Please read this manual thoroughly before installation and use, and keep it for future reference.

The WLLKIY 5.6KW Hybrid Solar Power Inverter is a versatile device designed to integrate solar power, utility grid, and battery power to provide continuous power supply. It features a high PV input, MPPT solar charger, and built-in Wi-Fi for convenient monitoring.

2. Atụmatụ igodo

Customizable status LED ring with RGB light.
Touchable button interface with a 4.3" colored LCD display.
Built-in Wi-Fi for mobile monitoring via a dedicated application.
Supports USB On-the-Go (OTG) function.
Data log events stored directly within the inverter.
Reserved communication port (RS485, CAN-BUS or RS232) for Battery Management System (BMS) integration.
Battery independent design, allowing operation without a battery in certain configurations.
Battery equalization feature to extend battery life cycle.
User-friendly LCD operation for easy configuration.
Improved charging power capabilities.
Built-in anti-dust kit for enhanced durability.

3. Ntuziaka nchekwa

Please observe the following safety precautions to prevent injury and damage to the inverter or connected equipment:

Naanị ndị ọrụ ruru eru ga-arụrịrị nrụnye.
Hụ na waya niile nha ha ziri ezi ma nwee mkpuchi kwesịrị ekwesị.
Ekwula ihe na-agbanwe agbanwe. Enweghị akụkụ ọ bụla dị n'ime ya nke a ga-eji rụọ ọrụ.
Keep the inverter away from water, excessive humidity, and flammable materials.
Hụ na ikuku dị mma gburugburu inverter iji gbochie oke okpomọkụ.
Always disconnect all power sources (PV, utility, battery) before performing any maintenance or wiring.
Yiri akụrụngwa nchedo onwe nke kwesịrị ekwesị (PPE) n'oge ntinye na mmezi.

4. Ntọala na nwụnye

4.1 Ngwaahịa gafereview

The WLLKIY 5.6KW Hybrid Solar Power Inverter features a sleek design with a prominent circular LCD display and an LED ring on the front. The rear panel provides all necessary connection terminals.

N'ihu view of the WLLKIY 5.6KW Hybrid Solar Power Inverter with a circular LCD display and blue LED ring.

Foto 4.1: N'ihu view of the Inverter.

N'ihu view of the WLLKIY 5.6KW Hybrid Solar Power Inverter with key specifications highlighted: 5.6KW 48V, 230VAC Voltage, 120A Max Charge Current, 5600W Max PV Array Power, 500VDC Max PV Array Voltage, and Built-in Wifi for Mobile Monitoring.

Figure 4.2: Inverter with highlighted specifications.

4.2 Njikọ Ports

The rear panel of the inverter provides various ports for connecting to solar panels, batteries, the utility grid, and loads. It also includes communication ports for advanced system integration.

N'azụ view of the WLLKIY 5.6KW Hybrid Solar Power Inverter showing connection terminals: AC IN, AC OUT, PV IN (+ and -), Battery (+ and -), Input Breaker, Grounding point, USB, COM, and BMS ports.

Ọgụgụ 4.3: N'azụ view of the Inverter with connection ports.

Ọrụ NA: Na-ejikọ na grid ọrụ ma ọ bụ jenerato.
Ọpụpụ AC: Connects to household appliances/loads.
PV n'ime: Connects to solar panel arrays. Ensure correct polarity (+/-).
Batrị: Connects to the battery bank. Ensure correct polarity (+/-).
Ntinye ntinye: Main AC input circuit breaker.
Grounding Point: For system grounding.
USB: For data transfer and firmware updates.
COM/BMS: Communication ports for external devices like Battery Management Systems.

4.3 Eserese Njikọ Sistemụ

The inverter can be integrated into various power systems, including solar, generator, and utility grid inputs, to power your home appliances and charge batteries.

System connection diagram showing solar panels, generator, utility grid, and battery packs connected to the inverter, which then supplies power to home appliances.

Figure 4.4: Typical System Connection Diagram.

Nhọrọ 4.4 PV Modul

When selecting appropriate PV modules for your system, it is crucial to consider the inverter's specifications to ensure compatibility and optimal performance. Pay close attention to the open circuit voltage (Voc) and maximum power voltage (Vmpp) of your PV modules.

Diagram showing solar panels on a roof connected to the inverter inside a house, which powers appliances. Below the diagram is a table titled 'INVERTER MODEL ISolar SMV IV 5.6KW' with parameters for PV module selection: Maximum output power 6000W, Maximum PV open circuit voltage 500VDC, Maximum charge current 120A, Maximum Power (Pmax) 250W, Max.PV module numbers in series 12 x 36V ≈120~450VDC, Max.Power Current Impp(A) 8.3A, PV module numbers in parallel 12 x 8.3 < 120A, Open Circuit Voltage Voc(V) 40V, Total PV module numbers 2 x 12 = 24, Short Circuit Current Isc(A) 8.9A. Text below the image states: 'When selecting proper PV modules, please be sure to consider below parameters: 1. Open circuit Voltage (Voc) nke modul PV agafeghị oke. PV array open circuit voltage nke inverter. 2. Mepee sekit Voltage (Voc) nke modul PV kwesịrị ịdị elu karịa min. batrị voltage.'

Figure 4.5: PV Module Selection Guidelines and Parameters.

Key considerations for PV module selection:

The Open Circuit Voltage (Voc) of your PV modules must not exceed the maximum PV array open circuit voltage of the inverter (500VDC).
The Open Circuit Voltage (Voc) of your PV modules should be higher than the minimum battery voltage.

Refer to the table in Figure 4.5 for detailed parameters for the ISolar SMV IV 5.6KW model.

5. Ịrụ ọrụ Inverter

Ngosipụta na bọtịnụ LCD 5.1

The inverter features a 4.3-inch color LCD display and touch-sensitive buttons for easy navigation and configuration. The display provides real-time information about the system status, input/output voltages, charging currents, and more.

Close-up of the WLLKIY 5.6KW Hybrid Solar Power Inverter's circular LCD display showing various system parameters and touch buttons below it.

Figure 5.1: Inverter LCD Display.

Use the touch buttons to navigate through menus, view different parameters, and adjust settings. Refer to the on-screen prompts for specific operations.

5.2 Mobile Monitoring (Wi-Fi)

The built-in Wi-Fi module allows for convenient remote monitoring of your inverter's performance via a dedicated mobile application. Download the official app from your device's app store and follow the in-app instructions to connect your inverter.

5.3 Ntinye data

The inverter automatically logs important system events and performance data. This data can be accessed via the LCD display or through the mobile monitoring application, providing valuable insights into your system's operation and history.

6. Nkọwapụta

Oke	Uru
Enyere ike	5600VA/5600W
Ntinye Voltage	230VAC
Nhọrọ nke Voltage Oke	170-280VAC (for personal computers); 90-280VAC (for home appliances)
Oke ugboro ugboro	50Hz/60Hz (Nchọpụta Akpaaka)
AC Voltage Iwu (Batt. Ọnọdụ)	230VAC ± 5%
Ike ịwa ahụ	11200VA
Nrụmọrụ (Elu)	90% ~ 93%
Oge mbufe	15ms (for personal computers); 20ms (for home appliances)
Ụdị ebili mmiri	Okpokoro nke Sine
Batrị Voltage	48VDC
Nchaji float Voltage	54VDC
Nchekwa oke ụgwọ	63VDC
Ụdị chaja anyanwụ	MPPT
Oke kachasị ike PV	6000W
MPPT Range Operating Voltage	120-450VDC
Maximum PV Matrix Open Circuit Voltage	500VDC
Nchaji anyanwụ kacha ugbu a	120A
Nchaji AC kacha ugbu a	100A
Nchaji kacha ugbu a	120A
Akụkụ (LxWxH)	115x300x400 mm
Nha ịbụ	10 n'arọ
Okpomọkụ na-arụ ọrụ	-10°C ruo 50°C
Okpomọkụ nchekwa	-15°C ruo 60°C

7. Nlekọta

Mmezi oge niile na-eme ka ogologo ndụ na arụmọrụ kachasị mma nke inverter gị sie ike:

Nhicha: Periodically clean the exterior of the inverter with a dry, soft cloth. Ensure ventilation openings are free from dust and debris. The built-in anti-dust kit helps, but regular checks are recommended.
Njikọ: Annually check all electrical connections for tightness and signs of corrosion. Loose connections can lead to overheating and poor performance.
gburugburu: Gbaa mbọ hụ na gburugburu ebe ọrụ ka dị n'ime oke okpomọkụ na iru mmiri akọwapụtara.
Ahụike batrị: If using batteries, monitor their health and perform recommended maintenance as per the battery manufacturer's guidelines. The inverter's battery equalization feature helps maintain battery health.

8. Nchọpụta nsogbu

This section provides guidance for common issues. For problems not listed here, please contact customer support.

Nsogbu	Ihe nwere ike ime	Ngwọta
Inverter anaghị agbanyụ	No input power (PV, battery, or AC), loose connections, tripped breaker.	Check all power connections, ensure breakers are on, verify battery voltage.
Enweghị mmepụta AC	Overload, short circuit, low battery voltage, inverter fault.	Reduce load, check for short circuits, charge batteries, check error codes on LCD.
PV input not charging	Insufficient sunlight, PV array voltage out of range, faulty PV connection.	Check sunlight conditions, verify PV array voltage is within MPPT range (120-450VDC), inspect PV connections.
Nsogbu njikọ Wi-Fi	Incorrect network settings, weak signal, app issues.	Ensure correct Wi-Fi credentials, move inverter closer to router, restart inverter and app.

9. Akwụkwọ ikike na nkwado

For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. WLLKIY is committed to providing high-quality products and customer satisfaction.

If you encounter any issues or require technical assistance, please contact WLLKIY customer support through the following channels:

Websaịtị: Visit the official WLLKIY websaịtị maka FAQ na akụrụngwa nkwado.
Email: Refer to your purchase documentation for support email addresses.
Ekwentị: Contact numbers may be available on the product packaging or official websaịtị.

Please have your product model (ISolar-SMV-IV-5.6KW 48V) and serial number (if applicable) ready when contacting support.

WLLKIY ISolar-SMV-IV-5.6KW 48V