Phanteks XT View Mid-Tower Gaming Chassis Instruction Manual

1. Okwu mmalite

The Phanteks XT View is a mid-tower gaming chassis designed to accommodate modern hardware with enhanced cooling capabilities and internal space. It features tempered glass on both the front and side panels, allowing for a clear view of internal components. The chassis supports the latest mainboards with hidden rear connectors for a clean build aesthetic.

Image 1.1: Phanteks XT View Chassis with internal components and D-RGB lighting.

Akụkụ ndị bụ isi:

• Support for rear-side connector mainboards.
• Front and side tempered glass panels.
• Includes three M25-120mm D-RGB fans.
• Supports up to nine 120mm fan positions.
• Dedicated 360mm radiator support in the top panel.
• Accommodates large graphics cards.

2. Ihe ngwugwu

Chọpụta na akụrụngwa niile dị na ngwugwu:

• XT View Chassis (Black)
• Storage Bracket (1x)
• M25-120_DBK Fan (3x)
• D-RGB Controller (1x)
• Triple SSD Bracket (1x)
• Side D-RGB LED strip (1x)
• Accessory Box containing:
  • Njikọ zip (30x)
  • MB/SSD Screws (30x)
  • Mkpịsị aka mkpịsị aka (4x)
  • HDD Screws (8x)
  • Standoff Tool (1x)
  • MB Standoff (1x)
  • PSU Screws (4x)
  • 30mm Fan Screws (12x, UNC6-32)

3. Ntọala na nwụnye

Follow these steps for proper assembly and installation of your PC components within the Phanteks XT View Chassis.

3.1. Ịkwadebe chassis

1. Ịkwapu: Carefully remove the chassis from its packaging.
2. Wepu Ogwe: Unscrew and remove the tempered glass side panels and any other removable panels to access the interior.

Foto 3.1: Ime view of the XT View chassis, ready for component installation.

3.2. Nwụnye motherboard

1. Wụnye Standoffs: Ensure the correct standoffs are installed for your motherboard form factor (ATX, micro-ATX, mini-ITX, E-ATX). Use the included standoff tool if necessary.
2. Place Motherboard: Jiri nlezianya dozie motherboard gị na nkwụsị na oghere I/O ọta.
3. Motherboard echekwara: Use the provided MB screws to secure the motherboard to the chassis.

3.3. Nrụnye Ike Ike (PSU).

1. Ọnọdụ PSU: Weba PSU n'ime akụkụ ya ahọpụtara na ala azụ chassis.
2. PSU echekwara: Fasten the PSU to the chassis using the provided PSU screws.

3.4. Nchekwa mbanye nwụnye

The chassis supports 3.5" HDDs and 2.5" SSDs.

• 3.5" HDD: Install into the storage bracket. The chassis supports 2x 3.5" drives (or 1x if 2x SSDs are installed in the same bracket).
• 2.5" SSD: Install into the storage bracket or the triple SSD bracket. The chassis supports 2x 2.5" drives (or 0x if 2x HDDs are installed in the same bracket).

Secure drives with the appropriate screws.

3.5. Nwụnye Kaadị Mgbasawanye (GPU)

1. Wepu mkpuchi oghere: Remove the necessary expansion slot covers from the rear of the chassis.
2. Fanye kaadị: Carefully insert your graphics card or other expansion cards into the PCIe slots on the motherboard.
3. Kaadị echedoro: Fasten the expansion card with screws. Vertical GPU support is available with an optional bracket (PH-VGPUKT4.0_03R/PH-PGPUKT_01).

Foto 3.2: Ime ụlọ dị n'azụ view highlighting expansion slots and fan mounting points.

3.6. Nwụnye Fan na Radiator

The chassis supports various fan and radiator configurations:

• 120mm Fan Locations: Right Side (2x), Top (3x), Rear (1x), Midplate (3x).
• 140mm Fan Locations: Top (2x), Rear (1x).
• Liquid Cooling Radiator Support:
  • Side: Up to 240mm (with Vertical GPU only).
  • Top: Up to 360mm.
  • Rear: Up to 120mm.

Install the included M25-120 D-RGB fans in your preferred locations. Ensure proper airflow direction for optimal cooling.

3.7. Njikwa USB

Utilize the cable routing channels and tie-down points behind the motherboard tray to organize cables. This improves airflow and aesthetics.

Foto 3.3: N'azụ view illustrating cable management space.

3.8. Njikọ I / O n'ihu

Connect the front I/O cables from the chassis to the corresponding headers on your motherboard:

• USB 3.0 nkụnye eji isi mee
• USB-C 3.2 Gen2 Type-E header
• HD-Audio header
• Power switch, Reset button, D-RGB color button, D-RGB mode button headers
• D-RGB expansion header (for additional D-RGB devices)

4. Ntuziaka ọrụ

4.1. Gbanyụọ / gbanyụọ

Pịa bọtịnụ ike located on the top front panel to turn the system on or off.

4.2. Njikọ Panel Ihu

Ogwe I/O dị n'ihu na-enye ohere dị mfe ịnweta:

• 1 x USB 3.0 ọdụ ụgbọ mmiri
• 1x USB-C 3.2 Gen2 port
• Microphone/Headphone Combo jack

Image 4.1: Front I/O panel on the top of the chassis.

4.3. D-RGB Control

The integrated D-RGB controller allows for customization of the included D-RGB fans and LED strip. Use the D-RGB color button to cycle through colors and the D-RGB mode button to change lighting effects. The D-RGB system can also be synchronized with compatible motherboards via the D-RGB Motherboard connector.

5. Nlekọta

5.1. Ihe nzacha uzuzu na-ehicha

Regularly clean the dust filters to maintain optimal airflow and cooling performance. Dust filters are typically located at the front, top, and bottom of the chassis.

1. Wepu ihe nzacha: Gently slide out or unclip the dust filters.
2. Ọcha: Use compressed air or a soft brush to remove accumulated dust. For heavily soiled filters, wash with water and allow to dry completely before reinstallation.
3. Tinyegharịa: Place the clean, dry filters back into their positions.

5.2. Nchacha izugbe

For external surfaces, use a soft, damp cloth to wipe down the chassis. Avoid abrasive cleaners or solvents that may damage the finish or tempered glass.

6. Nchọpụta nsogbu

Akụkụ a na-ekwu maka nsogbu ndị ị nwere ike izute.

6.1. Sistemu Anaghị Ike On

• Njikọ Ike: Verify that the PSU is properly connected to the wall outlet and the power switch on the PSU is in the 'ON' position.
• Njikọ motherboard: Ensure all power cables from the PSU are securely connected to the motherboard (24-pin ATX, 8-pin CPU).
• Front Panel Header: Check that the power button cable from the front I/O is correctly connected to the motherboard's front panel header.

6.2. D-RGB Lighting Not Functioning

• D-RGB Controller Connection: Ensure the D-RGB controller is properly connected to the PSU and the D-RGB devices (fans, LED strip).
• Mmekọrịta Motherboard: If using motherboard D-RGB control, verify the D-RGB Motherboard cable is correctly connected and the motherboard's software is configured.
• Ọrụ bọtịnụ: Test the D-RGB color and mode buttons on the front panel.

6.3. Fan Noise or Malfunction

• Njikọ: Ensure fan cables are securely connected to the motherboard fan headers or a fan controller.
• Ihe mgbochi: Check for any cables or objects obstructing fan blades.
• Uzuzu: Clean any dust buildup on fan blades.

7. Nkọwapụta

8. Nkwado na akwụkwọ ikike

For additional information, technical support, or warranty inquiries, please visit the official Phanteks websaịtị:

www.phanteks.com

Refer to the Phanteks website for the most current warranty terms and conditions applicable to your region.