VacLife Cordless Tire Inflator Portable Air Compressor User Manual

1. Okwu mmalite

The VacLife Cordless Tire Inflator (Model ATJ-6988) is a portable and versatile air compressor designed for inflating tires on cars, bikes, and other inflatables. Its compact, cordless design makes it convenient for on-the-go use, providing up to 150 PSI pressure. Equipped with a powerful motor, it offers quick and efficient inflation, along with an LED digital display for real-time pressure monitoring and an auto-shutoff feature for safe operation. The integrated LED light enhances usability in low-light conditions.

2. Ntuziaka nchekwa

Please read and understand all safety instructions before operating the device. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.

• Debe ngwaọrụ ahụ n'ebe ụmụaka nọ na anụ ụlọ.
• Do not operate the inflator in wet conditions or expose it to rain.
• Ensure the correct pressure setting for the item being inflated to prevent over-inflation and potential bursting.
• Allow the device to rest for at least 10 minutes after every 10 minutes of continuous use to prevent overheating.
• Ewepụla ma ọ bụ gbanwee ngwaọrụ. Kpọtụrụ ndị ọrụ ruru eru ọrụ niile.
• Use only the provided charging cable and compatible power sources.
• The device operates at a noise level of approximately 80 dB. Use hearing protection if sensitive to noise or in prolonged use.
• Tụfuo batrị n'ụzọ ziri ezi dịka iwu obodo siri dị.

3. Ihe ngwugwu

Chọpụta na ihe niile dị na ngwugwu:

• VacLife Cordless Tire Inflator Unit
• Air Hose with Schrader Valve Connector
• Ihe nkwụnye Valve
• Ball Needle Nozzle
• Inflatable Toy Nozzle
• USB USB USB (USB-A ka USB-C)
• Akwụkwọ ntuziaka (akwụkwọ a)

4. Ngwaahịa gafereview

Figure 4.1: VacLife Cordless Tire Inflator and Included Accessories. The image displays the main inflator unit on the right, featuring a digital display and control buttons. To the left, an air hose, two different cone-shaped nozzles, a ball needle, and a USB charging cable are shown.

4.1 Akụkụ

• Isi ngalaba: Houses the motor, battery, display, and controls.
• Igwe ikuku: Connects the inflator to the tire valve.
• Nozzles: Various adapters for different inflation needs (e.g., car tires, bike tires, sports balls, inflatable toys).
• USB Nchaji Port: Maka ịchaji batrị dị n'ime.

4.2 Njikwa na Ngosipụta

• Bọtịnụ Ike (Etiti): Press and hold to turn on/off. Short press to start/stop inflation.
• Bọtịnụ Ụdị (M): Cycles through inflation modes (car, motorcycle, bicycle, ball) and pressure units (PSI, BAR, KPA, KG/CM²).
• '+' / '-' Buttons: Na-edozi uru nrụgide ebumnuche.
• Light Button (Sun icon): Toggles the LED light modes (Flashlight, Alarm Light, SOS Light).
• Ikanam Digital Ngosipụta: Shows real-time pressure, preset pressure, selected unit, battery level, and inflation mode icons.

5. Nhazi

5.1 Ịchaji ngwaọrụ

1. Connect the provided USB charging cable to the charging port on the inflator.
2. Connect the other end of the USB cable to a compatible USB power adapter (not included) or a USB port.
3. The battery indicator on the LED display will show charging status. A full charge typically takes 3-4 hours.
4. Once fully charged, the device can operate continuously for approximately 20 minutes.

5.2 Attaching the Air Hose and Nozzles

1. Screw the air hose securely into the air outlet port on the top of the inflator.
2. Họrọ nozzle kwesịrị ekwesị maka ihe ịchọrọ ịgbanye.
3. Screw the selected nozzle onto the end of the air hose.

6. Ntuziaka ọrụ

6.1 Gbanyụọ ma ọ bụ gbanyụọ

• To turn on: Press and hold the Power button (center button) for 2-3 seconds until the display illuminates.
• To turn off: Press and hold the Power button for 2-3 seconds. The device will also automatically shut off after a period of inactivity.

6.2 Ịhọrọ Ngalaba Nrụgide na Ụdị

• After powering on, press the Mode button (M) to cycle through the four available pressure units: PSI, BAR, KPA, and KG/CM².
• Continue pressing the Mode button to select the desired inflation mode (car, motorcycle, bicycle, ball). Each mode may have a default pressure range.

6.3 Ịtọ Nrụgide Ebumnuche

• Once the desired unit and mode are selected, use the '+' and '-' buttons to adjust the target pressure value. The preset pressure will flash on the display.
• Refer to your vehicle's or item's recommended pressure (usually found on a sticker inside the car door, owner's manual, or on the item itself).

6.4 Starting Inflation

1. Connect the air hose (with appropriate nozzle) securely to the valve stem of the item to be inflated. The display will show the current pressure.
2. Press the Power button (center button) once to start inflation. The inflator will begin pumping air, and the real-time pressure will be displayed.
3. The inflator will automatically stop once the preset target pressure is reached. This is the auto-shutoff feature.
4. To manually stop inflation at any time, press the Power button again.
5. Disconnect the air hose from the valve stem.

ExampLe: Inflating a 195/55 R15 car tire from 22 PSI to 36 PSI typically takes approximately 3 minutes. For optimal performance and device longevity, allow the inflator to rest for at least 10 minutes after every 10 minutes of continuous operation.

6.5 Iji ọkụ LED

• Press the Light button (sun icon) to cycle through the LED light modes:
• Pịa mbụ: Activates the constant flashlight mode.
• Pịa nke abụọ: Activates the alarm light (slow flashing).
• Pịa nke atọ: Activates the SOS light (Morse code for SOS).
• Pịa nke anọ: Gbanyụọ ọkụ ikanam.

7. Nlekọta

• Nhicha: Jiri nwayọ hichaa mpụta nke ngwaọrụ ahụ, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the device is off and disconnected from power before cleaning.
• Nchekwa: Store the inflator in a cool, dry place, away from direct sunlight and extreme temperatures. Keep it out of reach of children.
• Nlekọta batrị: To prolong battery life, fully charge the device before long-term storage and recharge it every 3-6 months if not in use. Avoid completely draining the battery frequently.
• Nlekọta Nozzle: Keep nozzles clean and free of debris to ensure proper air flow.

8. Nchọpụta nsogbu

9. Nkọwapụta

10. Akwụkwọ ikike na nkwado

For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. For technical support or inquiries, please visit the official VacLife websaịtị ma ọ bụ kpọtụrụ ngalaba ọrụ ndị ahịa ha. Debe nnata nzụta gị dị ka ihe akaebe nke ịzụrụ maka nkwupụta ikike.