OREiN 4500LM/30W Motion Sensor Outdoor Flood Light Instruction Manual

1. Okwu mmalite

This manual provides detailed instructions for the installation, operation, and maintenance of your OREiN 4500LM/30W Motion Sensor Outdoor Flood Light. Please read this manual thoroughly before installation and use to ensure proper function and safety. Keep this manual for future reference.

Image 1: OREiN 4500LM/30W Motion Sensor Outdoor Flood Light, front view with three adjustable light heads and a motion sensor below.

2. Ozi nchekwa

Ịdọ aka ná ntị: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installation or servicing. This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.

• Ensure the power supply is turned off before beginning installation.
• Use only approved connectors and wiring suitable for outdoor use.
• Anwala ịmegharị ihe nrụnye. Mgbanwe ọ bụla nwere ike mebie akwụkwọ ikike ma mepụta ihe egwu nchekwa.
• Kpọtụrụ onye ọrụ eletrik tozuru oke ma ọ bụrụ na ị maghị akụkụ ọ bụla nke usoro nrụnye.
• This fixture is designed for outdoor use and is IP65 waterproof rated.

3. Ihe ngwugwu

Chọpụta na akụrụngwa niile dị tupu ịmalite nrụnye:

• Igwe ọkụ (1)
• Nkwado mgbago (1)
• Screws (for mounting)
• Wire Nuts (for electrical connections)
• Akwụkwọ ntuziaka (1)

4. Akụrụngwa Ngwaahịa

• Icha ọkụ & arụmọrụ dị elu: 4500 Lumens output with 30W power consumption, offering 150LM/W efficiency.
• Adjustable Motion Sensor: 180° wide sensing angle with a detection range up to 50 feet.
• Ụdị arụ ọrụ atọ: TEST Mode, AUTO Mode, and Dusk-to-Dawn (D2D) Mode for versatile lighting control.
• Na-adịgide adịgide & Nchekwa ihu igwe: IP65 waterproof rating, constructed from polycarbonate material for resistance against rain, dust, snow, and extreme temperatures.
• Nwụnye na-agbanwe agbanwe: Supports both wall mounting and soffit mounting.
• Isi ọkụ a na-agbanwe agbanwe: Three light heads can be independently adjusted to direct illumination where needed.
• Okpomọkụ agba: 5000 Kelvin (white light).

Image 2: Illustration demonstrating the IP65 waterproof rating, showing the flood light enduring rain, snow, and wind.

Image 3: Diagram showing the flexible adjustment angles of the three light heads (up to 340° horizontally, 90° vertically) and the motion sensor (up to 270° horizontally, 120° vertically).

5. Ntọala na nwụnye

This flood light is hardwired and requires connection to your home's electrical system. Professional installation is recommended.

1. Gbanyụọ ike: Before starting, ensure the power to the installation area is turned off at the circuit breaker.
2. Mpempe mgbago echekwabara: Jiri skru ndị enyere tinye ihe nkwado ahụ. Hụ na e ji skru ndị ahụ sie ike nke ọma.
3. Jikọọ waya: Connect the household wiring to the light fixture's wires using the provided wire nuts. Typically, black to black (live), white to white (neutral), and green/bare copper to green (ground).
4. Chekwaa ihe ndozi ọkụ: Mount the light fixture onto the mounting bracket, ensuring a tight and secure fit.
5. Insert Waterproof Plug: Ensure any necessary waterproof plugs are properly inserted to maintain the IP65 rating.
6. Gbanwee isi ọkụ: Position the three light heads to cover the desired illumination area.

Image 4: Step-by-step diagram illustrating the hardwired installation process, including securing the mounting bracket, connecting wires, and attaching the light fixture.

Foto 5: Ọpụamples of the flood light installed in both wall-mounted and soffit-mounted configurations.

6. Ntuziaka ọrụ

The OREiN flood light features an adjustable motion sensor with three distinct operating modes:

Foto 6: nso nso view of the motion sensor controls, showing dials for TIME (1/5/10 minutes), SENSITIVITY (10ft/20ft/30ft/Max 50ft), and a switch for MODE (TEST/AUTO/D2D).

Nhọrọ ụdị:

• Ụdị ule: The light turns on for a fixed 5-second duration when motion is detected, regardless of ambient light. This mode is used for testing the sensor's coverage area during installation.
• Ụdị AUTO: The light activates only at night when motion is detected. The duration the light stays on and the sensitivity of the sensor can be adjusted.
• D2D (Dusk-to-Dawn) Mode: The light automatically turns on at dusk and turns off at dawn, providing continuous illumination throughout the night. Motion sensing is not active in this mode.

Image 7: Visual explanation of the three operating modes: Test Mode (light on for 5s with motion), D2D Mode (light on all night), and Auto Mode (light on at night with motion for adjustable time).

Adjusting Settings (AUTO Mode):

• TIME Dial: Adjusts how long the light stays on after motion is detected. Options typically include 1, 5, or 10 minutes.
• SENSITIVITY Dial: Adjusts the detection range of the motion sensor. Options typically include 10ft, 20ft, 30ft, or Max (up to 50ft). A higher sensitivity setting means a longer detection distance.

7. Nlekọta

Mmezi mgbe niile na-eme ka ọkụ idei mmiri gị rụọ ọrụ nke ọma ma na-adịte aka.

• Nhicha: Jiri ihe na-eme ka oghere ọkụ na ihe mmetụta mmegharị ahụ dị nro, d hichaa ihe na-enye ọkụ mgbe niile.amp akwa . Ejila ihe nchacha abrasive ma ọ bụ ihe mgbaze.
• Nyocha: Regularly inspect the wiring and mounting for any signs of wear, damage, or loosening. Address any issues promptly.
• Enweghị nnọchi bọlbụ: This LED fixture does not require bulb replacement. The integrated LEDs are designed for long-term use.

8. Nchọpụta nsogbu

If you encounter issues with your OREiN flood light, refer to the following common problems and solutions:

• Ìhè anaghị agbanwu:
  • Ensure power is supplied to the fixture and the circuit breaker is not tripped.
  • Check the mode setting. In AUTO mode, it will only activate at night. In D2D mode, it will only activate at dusk.
  • Verify the motion sensor is not obstructed.
• Ìhè na-anọgide na-enwu mgbe niile:
  • If in D2D mode, this is normal operation.
  • If in AUTO mode, reduce the SENSITIVITY setting. Environmental factors like moving branches or passing vehicles can trigger the sensor.
  • Ensure the TIME dial is set correctly.
• A naghị achọpụta ihe mmetụta mmegharị:
  • Increase the SENSITIVITY setting.
  • Ensure the sensor lens is clean and unobstructed.
  • Verify the sensor is aimed correctly towards the desired detection area.

9. Nkọwapụta

Image 8: Comparison table showing specifications for different OREiN 3-head flood light models, including the 4500LM/30W version.

10. Akwụkwọ ikike

This OREiN flood light is covered by a Akwụkwọ ikike nke ọnwa 24 site na ụbọchị ịzụrụ. Biko dowe ihe akaebe nke ịzụrụ ihe maka akwụkwọ ikike. Akwụkwọ ikike ahụ na-ekpuchi ntụpọ dị na akụrụngwa yana arụ ọrụ n'okpuru ojiji nkịtị.

11. Nkwado

For any questions, technical assistance, or warranty inquiries, please contact OREiN customer support:

• Nkwado ekwentị: 1-844-506-1530 (available during working hours)
• Enyemaka n'ịntanetị: 7 days a week, 24 hours a day. Please refer to the official OREiN website or contact through the Amazon platform for online support options.